Remove handling for GPIO_INT_LEVELS_LOGICAL in driver now that we do
that in gpio_pin_interrupt_configure and gpio_pin_configure.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove handling for GPIO_INT_LEVELS_LOGICAL in driver now that we do
that in gpio_pin_interrupt_configure and gpio_pin_configure.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove handling for GPIO_INT_LEVELS_LOGICAL in driver now that we do
that in gpio_pin_interrupt_configure and gpio_pin_configure.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove handling for GPIO_INT_LEVELS_LOGICAL in driver now that we do
that in gpio_pin_interrupt_configure and gpio_pin_configure.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change when we clear interrupt status to happen before we handle the
callbacks. As the callbacks might manipluate the GPIO state and cause
a GPIO interrupt. If we clear interrupt status after than we might
miss an interrupt.
Also only clear interrupts for interrupts that are we have enabled and
that were reported when we read from the interrupt status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update driver code and board files to use new GPIO configuration flags
such as GPIO_ACTIVE_LOW. Also add implementation of new port_* driver
API as well as gpio_pin_interrupt_configure function.
Tested on frdm_k64f board.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update driver code and board files to use new GPIO configuration flags
such as GPIO_ACTIVE_LOW. Also add implementation of new port_* driver
API as well as gpio_pin_interrupt_configure function.
Tested on nrf52840_pca10056 board.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Update driver code and board files to use new GPIO configuration flags
such as GPIO_ACTIVE_LOW. Also add implementation of new port_* driver
API as well as gpio_pin_interrupt_configure function.
Tested on sam_e70_xplained board.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update driver code and board files to use new GPIO configuration flags
such as GPIO_ACTIVE_LOW. Also add implementation of new port_* driver
API as well as gpio_pin_interrupt_configure function.
Tested on efr32_slwstk6061a board.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Both pin sets and values encoding pin values are ultimately represented
by 32-bit unsigned integers. Provide typedefs that make the role of a
parameter explicit.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit moves interrupt configuration for a single pin from
gpio_pin_configure to gpio_pin_interrupt_configure function.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit adds following functions which work with pin logical levels
(take into account GPIO_ACTIVE_LOW flag):
- gpio_port_get, gpio_port_set_masked, gpio_port_set_bits,
gpio_port_clear_bits, gpio_port_set_clr_bits
- gpio_pin_get, gpio_pin_set
Functions which work with pin physical levels:
- gpio_port_get_raw, gpio_port_set_masked_raw, gpio_port_set_bits_raw,
gpio_port_clear_bits_raw, gpio_port_set_clr_bits_raw
- gpio_pin_get_raw, gpio_pin_set_raw
As well as functions:
- gpio_port_toggle_bits, gpio_pin_toggle_bits
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
When building the i2s tests on 96b_argonkey we get the following
warnings:
drivers/dma/dma_stm32.c: In function 'dma_stm32_configure':
drivers/dma/dma_stm32.c:181:2: error: 'periph_addr_adj' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
181 | switch (increment) {
| ^~~~~~
drivers/dma/dma_stm32.c:161:2: error: 'memory_addr_adj' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
161 | switch (increment) {
| ^~~~~~
Fix by initialzing periph_addr_adj and memory_addr_adj to 0.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The current sam spi driver uses soc dependent name which duplicate
configuration to enable other platforms. This refactor current
definitions to a generic way to reuse symbols by multi soc definitions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
spi_context_lock() & spi_context_release() are called in transceive()
function for a better readability.
Signed-off-by: Ismael Fillonneau <ismael.fillonneau@stimio.fr>
riscv64 CPUs can access full 64-bit memory-mapped register by a single
instruction, so we can directly access these registers.
Signed-off-by: Jim Shu <cwshu@andestech.com>
Watchdog type is found on e.g. Pearl/Jade Gecko, often
more than 1 is present.
Driver supports timeout and (minimum) window configuration
and reset or timeout interrupt support for now.
Signed-off-by: Oane Kingma <o.kingma@interay.com>
Gain values are specified with enumeration values that can't be used
to reverse the effects of scaling the input signal. Provide a
function that reverses the effect of the gain by scaling a measured
value.
Also provide a function that converts a raw measurement captured with
a reference voltage and specific gain and resolution to the
corresponding voltage in millivolts.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Introduces a new ft5336 touch panel driver for the keyboard scan (kscan)
interface. The driver currently uses a timer to periodically poll touch
data in the system work queue, but later it can be enhanced to use a
gpio interrupt instead of a timer.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
ARM cores may have a per-core architected timer, which provides per-cpu
timers, attached to a GIC to deliver its per-processor interrupts via
PPIs. This is the most common case supported by QEMU in the virt
platform.
This patch introduces support for this timer abstracting the way the
timer registers are actually accessed. This is needed because different
architectures (for example ARMv7-R vs ARMv8-A) use different registers
and even the same architecture (ARMv8-A) can actually use different
timers (ELx physical timers vs ELx virtual timers).
So we introduce the common driver here but the actual SoC / architecture
/ board must provide the three helpers (arm_arch_timer_set_compare(),
arm_arch_timer_toggle(), arm_arch_timer_count()) using an header file
imported through the arch/cpu.h header file.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Lot of misdefined variables that went in undetected due to lack of CI on
this board. Fix them and test build with new SDK.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Switch to `NET_SOCKET_REGISTER` mechanism over the offloaded API
registration.
Including the following fixes from the review:
* The fd returned by the socket accept call needs to be finalized,
similar to how it is done for socket creation.
* sl_RecvFrom() in TI SimpleLink Host driver does not support NULL
pointers for 'from' address and address length, and sl_SendTo() does
not ignore the destination address when in connection mode, so passing
NULL would cause a failure. These issues have been reported to TI
(CC3X20SDK-1970, CC3X20SDK-1971).
Let's use sl_Recv and sl_Send to implement recvfrom/sendto in the case
of NULL addresses.
* simplelink_poll() should not process negative file descriptors in the
fds array after sl_Selecti() returns. A negative fd value indicates
that the entry is invalid and should be ignored.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Used the SocketCAN initalization code from the can_stm32.c driver which
successfully initializes SocketCAN for the Flexcan driver
Signed-off-by: Peter van der Perk <peter.vanderperk@nxp.com>
If the Ethernet driver has VLAN enabled (only native_posix, mcux
or gmac has VLAN supported), then the iface pointer in ethernet
context should contain the main network interface. This is needed
so that the interface will get link address set to it properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current implementation directly passes timeout value to workqueue/timer
which results in assertion or instant timeout in case when K_FOREVER is
passed. This fix ensures that no timer or workqueue is called with
K_FOREVER.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Use signed values for timeout in UART asynchronous API, to be consistent
with timeout type in timer and workqueue values.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Extended nrf_uarte driver to support TX only UARTE instances.
When RX pin is not provided then RX is not started at all. This
allows to achieve low power with logging/console enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added delay before starting low frequency clock for the first time to
ensure that anomaly conditions are not met. Delay is configurable and
might be disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Most JEDEC NOR flash devices uses not only typical SPI mode
(MISO,MOSI,SCK and CS), but also QSPI mode (IO0,IO1,IO2,IO3,SCK and CS).
QSPI mode uses more data lines and as a result provide higher
throughput. If this were not enough, Nordic chips provide
hardware acceleration for read/write/erase functions, what
gives significant performance boost.
It does a lot of things "behind the scene", i.e when user has written
some data to the flash and would like to read them back, it has to wait
until the flash is ready by reading WIP bit in Status Register.
This driver does it automatically.
Signed-off-by: Kamil Lazowski <Kamil.Lazowski@nordicsemi.no>
Update the hal_nordic module revision, to switch to nrfx 2.1.0.
Because the list of peripherals for nRF5340 has changed as follows:
- SPIM2 has been renamed to SPIM4
- SPIM2-3, SPIS2-3, TWIM2-3, TWIS2-3, and UARTE2-3 have been added
a couple of related corrections needed to be applied in dts and Kconfig
files, plus the spi_nrfx_spim driver has been extended with the support
for SPIM4.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The rf2xx driver is doing automatic retransmissions in hardware based
on whether ACKs are received or not. Currently the driver is not
invoking ieee802154_radio_handle_ack() as other drivers are doing and
required by OpenThread since 4fe1da9. This add rf2xx_handle_ack method
to ensures required ACK processing when driver performs TX.
Fixes: #21763
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Lots of style mess in this driver:
- 80 chars limit not followed
- variable allocation and if condition on it should be coalesced
- etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
DesignWare driver can manage different amount of irqs so let's make it
configurable via DTS.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Base address does not change at runtime, thus storing it directly into
device's config.
Also keeping it consistent in naming: s/port/dev
And no need to store irq_num as it is unused.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There will be more instance of that driver, and the initialization
function will the same all the time. That was done wrong as it was not
following the device driver rules.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This driver is going to be used by other SoCs and as such should be
easily configurable through DTS.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
irq_enable() can be directly called from relevant irq config function
and thus voids the necessity to store the IRQ number, saving some
memory.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no such thing as CAVS DMA IP block, the DMA IP block found on
CAVS based chips is made with DesignWare one.
This will help to centralize DW based DMA device into one driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The sx1276_rx_done() function supports RSSI and SNR.
Change to support RSSI and SNR through sx1276_lora_recv() function.
Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
The RF2XX driver not always sent ACK when a RX frame requests. This
happen because RF2XX transceiver asserts TRX_END interrupt after
confirm that the FCS is valid. The driver can now decode the frame
but in parallel the radio still processing the ACK frame. This will
sync the radio FSM state to ensure that ACK will be send.
Fixes#21659
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Remove soc/arm/st_stm32/stm32YY/flash_registers.h files.
Change register accesses in stm32 flash drivers to use FLASH_TypeDef
from modules/hal/stm32/stm32cube/stm32YYxx/soc/stm32xxxxxx.h.
Fixes#16235
Signed-off-by: Sarvesh Patkar <psarvesh314@gmail.com>
usb-device.h must be included only if CONFIG_USB_UART_CONSOLE is
defined, otherwise it is not used and will pull a lot of usb code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
when DMA IP is enabled on stm32 series,
the heap size must be configured to large value
because of dma channels configuration.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patches defines constants from dma registers
depending on the dma configuration of the stm32 soc
Some devices have 6 or 7 or 8 dma channels per dma instance
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This checks if the DMA controller supports or not
the memory-to-memory transfers. For DMA Version1,
in the stm32f2xx, stm32f4xx, stm32f7xx series,
only DMA instance 2 is able to transfer mem-to-mem.
For other series, with DMA Version2, there is no such a limitation.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix#22188
Introduce config option to disable automatic acknowledge via
virtual wires on response to eSPI host suspend and reset warnings.
This will give the opportunity for eSPI slave systems that need to
perform preparations before reset or suspend.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Introduce a new counter API function for reading the current counter
value (counter_get_value()) and deprecate the former counter_read() in
favor of this.
Update all drivers and calling code to match the new counter API.
The previous counter driver API function for reading the current value
of the counter (counter_read()) did not support indicating whether the
read suceeded. This is fine for counters internal to the SoC where the
read always succeeds but insufficient for external counters (e.g. I2C
or SPI slaves).
Fixes#21846.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
So far, nRF 802.15.4 radio driver build was dependent on the 802.15.4
subsystem in Zephyr. While this was a reasonable approach for samples,
it prevented the radio driver from being built as a standalone entity,
which could be useful in some applications (e. g. running core nRF
802.15.4 radio driver tests with Zephyr).
Resolve this, by providing a separate set of Kconfigs for the radio
driver, therefore allowing to build it as a separate entity. The 802154
subsystem simply enables the radio driver module in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implement uart_pipe functionality for the modem so that it
integrates with the PPP implementation.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Create a driver for GSM modems that use a standard AT command set
and enable Zephyr's own PPP stack for IP traffic.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This commit introduces the can-primary alias to identify
the primary CAN interface.
This alias is used for all samples and tests, so they don't
need to probe the right interface.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The CONFIG_ prefixes were missing on these.
Found with a work-in-progress scripts/kconfig/lint.py check.
This symbol is defined in kernel/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
I2C interrupts usage should be the preferred way. This commit
enables them by default in the STM32 I2C driver itself.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Same deal as in commit 677f1e6 ("config: Turn pointless/confusing
'menuconfig's into 'config's"), for a newly-introduced stuff.
Also clean up headers to be consistent with recent cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONSOLE_HANDLER was unconditionally selecting UART_INTERRUPT_DRIVEN (and
depends on it in the code), but UART_INTERRUPT_DRIVEN depends on
SERIAL && SERIAL_SUPPORT_INTERRUPT.
Add a SERIAL_SUPPORT_INTERRUPT dependency to CONSOLE_HANDLER.
CONSOLE_HANDLER already depends on UART_CONSOLE, which depends on
SERIAL, so a SERIAL dependency does not need to be added.
This avoids some selects with unsatisfied dependencies in CI.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Silicon Labs EFM32GG11B SoCs have more USART ports than
currently supported by the driver. Driver expanded with
support for USART4 and USART5.
Signed-off-by: Oane Kingma <o.kingma@interay.com>
Ethernet MAC present in Silicon Labs EFM32GG11B4xx and
EFM32GG11B8xx SoCs.
DMA based driver with support for link up/down detection.
Signed-off-by: Oane Kingma <o.kingma@interay.com>
Define a binding for the Bosch BMA280 sensor. Remove the Kconfig
settings and update the driver to use the devicetree information.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
After startup the native_posix flash was filed by 0x00 instead
of 0xff, which is not coherent with erased byte value which
is 0xff for the native_posix target.
Such inconsistent behavior makes for instance running
a storage system designed(or configured) for a flash device
with 0xff as erased byte values problematic.
This patch makes flash erased after new flash device file creation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The PrimeCell UART (PL011) IP can use one single combined/shared
interrupt line instead than different IRQ lines for TX/RX/Err/... This
is the most common configuration supported in the Linux world but not
currently supported in Zephyr. QEMU emulates a PL011 UART with a single
interrupt line as well.
To support this configuration we have to hookup the PL011 driver with a
shared IRQ driver and add two new configuration options when the shared
IRQ line is used.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
There is only one possible command, so just use if instead of switch
to avoid several MISRA-C violations and also avoid set dev_data wrongly
unused when UART_NS16550_DLF_ENABLED is defined.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Commit 68a235932f changed this driver to
not use hard-coded options. The problem was that these options were
never being set. This commit just set an initial value that can be
changed later.
Fix 68a235932f
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The NS16550 UART driver is currently hard-coded as 8-n-1
with no flow control. The baud rate is set by what is in DTS.
This commit moves away from hard-coded and strictly DTS to
configurable using the UART configure API. Requires commit #bcb807.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The UART configure API was added to uart.h and this commit
implements the initial framework for the configure API for
the ns16550 uart. This includes the configure() and config_get()
functions and uart device configuration structures of the uart
configure API for the ns16550.
Note this commit does not resolve the pre-existing hard-coded
8-n-1 implementation.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Patch introduce references to LittleFS instead of NFFS where it
was suitable. In other places NFFS mentions were removed
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
According to NRF product specifications the smallest write unit is
32-bits. Added parameter 'CONFIG_EMULATE_ONE_BYTE_WRITE_ACCESS'
which allows one byte flash write using more complex operation.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Grouped all nRF driver sub-option under SOC_FLASH_NRF
menuconfig.
This makes menuconfig cleaner.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Create new instances of SPI using single STM32_SPI_INIT() macro
invocation, similar as it is done for STM32 UART driver. Add also
implicit '#ifdef CONFIG_SPI_id' check, so it further reduces required
lines of code for each SPI instance definition.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Update the NXP Kinetis FlexCAN driver to use the initialization
parameters for disabling self-reception and enabling listen-only mode
added in MCUXpresso v2.7.0.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
...instead of kconfig.
This provides a bit more flexibility in defining driver
instances. Also, since the DTS defines 5 I2C controllers,
the driver code is extended to cover all 5 if the controllers
are enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The SoC, driver, and board support for the CC2650 and CC2650 Sensortag
aren't currently supported and we are removing them as such. If anyone
is interesting in supporting this platform we can easily recovery it
from git.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These were unintentionally omitted. We don't expose callback
registration or callback response APIs for security reasons.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Ensure that the SPI SCK and MOSI pins are set to very high as slower
SPI speeds will cause device hangs when used. This is due to the state
changing too fast for hardware, causing RXE to never fire and thus
hang.
Signed-off-by: Pushpal Sidhu <psidhu.devel@gmail.com>
TCP segment with several EOL TCP options causes echo server to block and
use 100% of CPU. This patch fixes that issue by using k_yield to let
also other threads to run.
Fixes#21949
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
The path to include/drivers should not be in the compiler include path
list, only include/. In order to make this possible, always explictly
refer to hci_driver.h via the drivers/bluetooth/ path and not only
bluetooth/.
Fixes#21974.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add sensor driver for the internal temperature sensor present in the
NXP Kinetis SoC series.
The driver allows reading the die temperature and the voltage of the
external voltage reference used for calculating the temperature.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add support for `CAP_NO_IV_PREFIX` in mbedTLS_shim and advertise this as
one of its capabilities. When this flag is active, the IV passed is
preserved to allow applications to reuse the IV buffer.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Following update of STM32Cube packages for series F0/L0/F3,
a new file ll_usb.h is now available for these series.
As a consequence, specific hanlding is no more requested for this
series is stm32 usb_device driver.
Fixes#21962
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Invalid channel should be filtered in intmux isr, please refer to
page 1243~1244 of chapter 36 INTMUX of RV32M1 RM.
Note: Unlike the NVIC, the INTMUX does not latch pending source
interrupts. This means that the INTMUX output channel ISRs must
check for and handle a 0 value of the CHn_VEC register to account
for spurious interrupts.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Nrfx_uarte uses a hardware timer/counter to count received bytes.
Keeping this timer enabled increases power consumption for some SoCs.
This change disables the timer when an inactive power state is set.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
Refactors the mcux wdog driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux rtc driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux dspi driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux lpsci driver to use generated device tree macros
directly. Removes now unused dts fixup macros from i.mx rt and kinetis
socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux uart driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the mcux lpi2c driver to use generated device tree macros
directly. Removes now unused dts fixup macros from kinetis socs.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
