When reading attributes from static services their handles will not be
set and must be resolved at runtime.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Port the fix for the controller implementation to make start
encryption queueable if there is any control procedure in
progress.
Refer to #15335.
Relates to #15335, #15186, #15958 and #14636.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix disconnect command optional argument count to permit the
supply of Bluetooth Address so as to be able to cancel a
pending central initiated connection creation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix gatt indicate when conn is NULL and called with characteristic
declaration as the attribute argument. In this case the handle was not
advanced to the characteristic value. This is inconsistent with the rest
of the notify and indicate API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Mesh Profile 1.0 Section 6.6:
"The timeout for the SAR transfer is 20 seconds. When the timeout
expires, the Proxy Server shall disconnect."
This will let qualification test case MESH/SR/PROX/BV-05-C pass
without requiring an explicit disconnect.
Fixes#16600
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This moves the processing packets of upper layers from RX thread to the
system workqueue so they have the same priority as the TX callbacks
which has the added benefit of making any protocol on top of L2CAP to
be executed using system wq stack.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
These options are mutually exclusive, or more specifically,
CONFIG_POSIX_API has wider scope and supersedes
CONFIG_NET_SOCKETS_POSIX_NAMES. Implementation-wise, the two
options should not be defined at the same time, as that may
lead to declaration conflicts.
Fixes: #16141
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit fixes the zassert_mem_equal macro to properly print
the formatting string is given as a parameter by the user.
There is an error that is an effect of directly copying the
previous implementation that was using the inline function.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
These events aren't errors at all, but rather part of normal operation.
They shouldn't trigger error messages, especially given that the console
gets absolutely flooded with them if power management is activated.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
When mcumgr smp data was received over shell uart transport
it was not waking up shell thread and thus request was not
processed. Shell thread must be waken up on any incoming
data, even data which is only dedicated for mcumgr smp.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Disable flow control with POSIX_ARCH since these boards tend to run
faster than normal defering the TX callback to system wq may not be
able to run before another packet is received.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes the transmission complete callbacks to run on system wq
context so they are not executed in TX thread which usually has a much
smaller, and non-configurable, stack size.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reworks bt_gatt_notify_cb to allow passing an UUID, in addition to
that it can now accept multiple notification at once as there could be
multiple instance of the same UUID the user can set multiple set of
parameters.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make use of bt_gatt_foreach_attr_type in gatt show-db to match
attributes by UUID.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make use of bt_gatt_foreach_attr_type to match the CCC UUID which
previously was not possible with bt_gatt_foreach_attr.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_foreach_attr_type which can match attribute by UUID
and/or attribute user_data, in addition of that the user can also limit
the number of matches.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit changes zassert_mem_equal as a macro instead
of a function implementation.
In the previous implementation when an assertion fails
the location inside ztest_assert.h file was displayed.
This modification displays the location where zassert_mem_equal
was used.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Implement HCI driver for STM32WB. It allows host to controller.
It is based on ST library allowing communication over RAM shared
bewteen chip's C-M4 and C-M0 cores.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit removes redundant checks if the module
was already initialized.
The variable to mark the fact of initialization is
moved as a global module variable.
This allows creating more sophisticated unit tests
of the settings subsystem by giving a possibility to modify
the internal mark of the fact the system was initialized.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Offloaded `fcntl` implementation should be available for all offloaded
implementations, not specific for TI. `socket_offload.c` is already
conditionally compiled based on `CONFIG_NET_SOCKETS_OFFLOAD` option, so
there should not be conflicts for non-offloaded interfaces.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When removing a service using bt_gatt_service_unregister, its attributes
handles will keep their value which can cause a problem when adding the
service again to the GATT database.
When re-adding, the gatt_register routine is taking the last handle of
the GATT database to compare it with the handles of the service to be
added.
If a service has handles with a lower value than the last handle of
the database an error will occur.
If we add/remove/add the last service, no error will occur as its
handles are always greater than the last one of the database.
Instead of resetting the handles when unregistering a service and
reassign new ones we make sure that the handles of the services are
not in use in the GATT database in order to place the service back
where it used to be.
Signed-off-by: Arthur Crepin-Leblond <arthur.crepin@proglove.de>
Implements hooks to implement user protocols in ull.c
A user defined init function can now be called, this code is gated by
the CONFIG_BT_CTLR_USER_EXT define.
A user defined PDU length can now also be defined using the Kconfig
CONFIG_BT_RX_USER_PDU_LEN
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
There isn't a function to handle the unmount, so I implemented based
in f_mount comments. In the comments of f_mount we actually have
that f_mount is used to mount/unmount logic, is just necessary use
NULL pointer to fs argument.
Signed-off-by: Lucas Peixoto <lucaspeixotoac@gmail.com>
Shell history module reworked to use ring buffer for storing
commands. Dedicated buffer is used to story all command lineary.
History capacity is in bytes not in number of entries, e.g.
many short commands can be stored or few long (depending on
CONFIG_SHELL_HISTORY_BUFFER).
Removed implicit command null termination from shell_history and
added it to shell after fetching command line from the history.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There is no reason for storing a pointer into an atomic_t variable here.
Not only because this requires a dubious double cast that breaks on
64-bit builds as atomic_t is a 32-bit type, but also because the comment
in the code already admits that the whole operation isn't atomic anyway
and that it is fine. So let's keep things simple.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
- Delete CONFIG_TEST_USERSPACE=n no-ops because it's the default
since commit 7b1ee5cf13
- Some tests have a "userspace" tag pretending to TEST_USERSPACE but
don't and vice versa: fix missing or spurious "userspace" tags in
testcase.yaml files.
Tests have a _spurious_ "userspace" tag when they PASS this command
cause none should pass:
./scripts/sanitycheck --tag=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee userspace.log
All tests run by this command must either fail to build or fail to run
with some userspace related error. Shortcut to look at all test
failures:
zephyr_failure_logs() {
awk '/see.*log/ {print $2}' "$@"
}
Tests _missing_ "userspace" tag FAIL to either build or to run with some
userspace related error when running this:
./scripts/sanitycheck --exclude=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee excludeuserspace.log
Note the detection methods above are not 100% perfect because some
flexible tests like tests/kernel/queue/src/main.c evade them with #ifdef
CONFIG_USERSPACE smarts. Considering they never break, it is purely the
test author's decision to include or not such flexible tests in the
"userspace" subset.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Length should be at least of UDP header size but not bigger than actual
payload size.
Reported-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Due to commit a211afb0 ("logging: Add option to detect missed
transient string duplication"), the logs for LwM2M subsystem
is now spamming missing log_strdup() calls.
Let's add log_strdup() where needed.
Signed-off-by: Michael Scott <mike@foundries.io>
This adds a new callback for L2CAP channels which notities whenever
status has changed so the channel user can can for example resume or
suspend sending depending on the status.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Bluetooth menu has way too many option so this move the L2CAP
specific option to its own menu.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prints to the output when a packet finishes transmitting:
uart:~$ l2cap send 2
Outgoing data channel 0x005166a0 transmitted
Outgoing data channel 0x005166a0 transmitted
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a new callback to bt_l2cap_chan_ops which is called whenever a
SDU is completely sent.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows setting a custom pointer to be passed back to the complete
callback at expense of increasing the buffers in 4 bytes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This changes the declaration of fixed channels to be statically defined
with use of BT_L2CAP_CHANNEL_DEFINE since fixed channels are never
unregistered.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Added CONFIG_LOG_DETECT_MISSED_STRDUP (by default on) which enables
scanning of log message strings in search for %s and reports if
string address is not from strdup buffer pool and outside read only
memory section which indicates that log_strdup() wrapping is missing
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If a valid numeric IP address is provided as argument, it should
be resolved without contacting DNS server.
Also, implement handling of AI_NUMERICHOST.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fix shell app regression due to stale tmp role implementation
not fully being removed in commit 4c77bf6194 ("Bluetooth:
controller: Remove redundant tmp role implementation").
The regression caused ticker indexes outside of allocations to
be accessed causing application faults and memory corruptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
