The HCI transport implemented by an application using the HCI raw
interface may have its own buffer headroom requirements. Currently the
available headroom gets completely determined by the selected HCI
driver. E.g. most of the time this is the native controller driver
which doesn't reserve any headroom at all.
To cover for the needs of HCI raw users, add a new Kconfig variable
for the apps to set to whatever they need. Correspondingly, use the
maximum of the HCI driver and HCI raw headroom requirements for the
buffer pool definitions and the headroom initializations.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Linux btusb driver do not relies on ZLP to determine the
end of a transfer. Instead the data is transmitted
continuously and the driver obtains the length of a event
from the HCI Event Packet header.
Fixes: #20250
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
USBD_CFG_DATA_DEFINE macro has not consider that a class
could have more than one set of usb_cfg_data struct.
If a class has more than one set of usb_cfg_data
then they should be sorted the same way like by
USBD_DEVICE_DESCR_DEFINE macro.
Fixes: #16240
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Added check to see if CONFIG_BT_CTLR_TX_BUFFER_SIZE is defined,
and use that as the BT_L2CAP_MTU if that is the case. Otherwise,
use the previously hard coded MTU size (64). This enables users
to configure the MTU, enabling longer transfers.
The fix was inspired by how this is solved in
samples/bluetooth/hci_uart/src/main.c
Tested on nrf52840_pca10056.
Signed-off-by: Dennis Wildmark <dennis.wildmark@assaabloy.com>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This patch increases size of acl_tx_pool and makes sure that acl_read_cb
waits for available buffers.
Size of acl_tx_pool is now configurable with CONFIG_BT_CTLR_TX_BUFFERS.
Previously it was possible to run out of buffers and in that case
acl_read_cb returned. This caused ACL data TX to stall because device
did not read data from HCI out endpoint.
Fixes#14899
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Add interface parameter to interface configuration callback to be able
to configure several instances of the same class.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This allows to place instances of the class one after another in the
linker section.
Fixes#12908
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Start of Frame events can now be accessed from USB classes.
This will be useful when implementing idle rate functionality.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove all CONFIG_*_EP_ADDR options but keep the default
values for it, as they are necessary to find ep_addr in
usb_ep_cfg_data associated with bEndpointAddress in
interface descriptor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Adapt functions for new composite interface.
Assign bInterfaceNumber and similar variables of a Interface
default values, these should be valid values for non-composite
configuration. For the case of the composite configuration,
these variables must be set by the interface configuration
function (interface_config) accordingly.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch changes all class functions so that the endpoint
address will be retrieved from the usb_ep_cfg_data at runtime.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch moves the descriptor parts to related class
and function drivers and extends the usb_fix_descriptor
function so that the wTotalLength and bNumInterfaces
are corrected before enumeration.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Use transfer API for ACL out transfers. No extra buffer is requested,
directly use the net buf and update its len on transfer completion.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Bluetooth net buffers have 1-byte reserve, which can be used by HCI bus
driver (uart, spi...) to set packet type (H4).
This fixes assert when building hci_usb with CONFIG_NET_BUF_SIMPLE_LOG.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Calling bt_send from IRQ context is not safe, at least in HCI SPI case.
In the same way as hci_core, create a thread for TX.
This fixes hci_usb sample for 96b_carbon board.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Implement Bluetooth over USB functionality through Bluetooth raw
access to the Bluetooth controller. Most devices with Bluetooth and
USB controllers supported by Zephyr can export themselves as USB
Bluetooth dongles.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
