This commit introduces fixes for nRF IEEE 802.15.4 radio driver and
serialization used by the driver.
Signed-off-by: Pawel Kwiek <pawel.kwiek@nordicsemi.no>
So far nRF's TIMER was used for generating PWM signal. Add support for
generating PWM based on RTC, which is sourced by 32KHz low frequency
crystal. This allows to use low frequency PWM with much lower power
consumption, because high frequency clock path can be disabled.
Don't support RTC clock prescaler, because maximum 512s period covers
most use cases. This allows to adjust pulse and period cycles to the
fact that CLEAR task event is generated always one LFCLK cycle after
period COMPARE value is reached.
Also update hal_nordic revision, as it contains updated check for PPI
channels conflict when RTC is used to generate PWM.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Update TF-M module SHA. This picks up the clean-up
of the unnecessary mbed-crypto directories in the
module repository.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The snapshot update adds support, to mcumgr, for flash devices that
have non-0xff erase value.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This commit brings changes in nRF IEEE 802.15.4 radio driver's
handling of front-end modules.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Update manifest for tf-m module to upgrade
trusted-firmware-m to v1.2.0 release from upstream.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use common definitions of HAL_USED_PPI_CHANNELS and HAL_USED_PPI_GROUPS
macros that will provide (through z_bt_ctlr_used_nrf_ppi_* variables)
information about either PPI or DPPI (depending on the SoC) resources
used by the Bluetooth controller.
Update also the hal_nordic module revision, to make the related nrfx
allocator aware of those reserved DPPI resources.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update manifest pointer for the TF-M module,
so it excludes building the Non-Secure regression
tests (it should be TEST_NS=OFF by default).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update manifest pointer for the TF-M module,
so it picks the bug fix for nRF5340 debug
authentication initialization.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Enables optionally placing Segger RTT and SystemView data in the DTCM
linker section instead of the default data section. This is needed on
SoCs in the i.MX RT series that use cacheable external SDRAM to store
data.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Move actual test cases from the run-sample-tests.sh script to
the network samples directory that are supported by Docker based
testing. Each network sample directory that supports Docker testing,
will contain docker-test.sh script that is sourced by the runner
script. The docker-test.sh script will run the test as needed and
then return return value to the runner script.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
* Add RCP library.
* Conditionally remove non required libraries not required for RCP.
* Drop :option: marker for CONFIG_OPENTHREAD_NCP_SPINEL_ON_UART_ACM
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Add Kconfig options that will be used by the module
to call the function with the desired parameters.
Refactor the tfm_integration samples and
the supported boards.
Update west.yml to bring in Cmake changes that use the new KConfigs.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
This brings a bugfix for warning and linker error of debug
build of ieee802154 driver.
Signed-off-by: Czeslaw Makarski <Czeslaw.Makarski@nordicsemi.no>
Allow gPTP sample to be run via run-sample-tests.sh script.
This makes it possible to do simple smoke testing and verify that
gPTP stack is not broken.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Updates trusted-firmware-m to a683f7359f0ea2551da7d11509589fcef0dc8a78,
which enables BUILD_PROFILE parameter.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Update west manifest to bump TF-M version to v1.2-RC2.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This change enables the multi-protocol rf patch to be used for
the cc13xx_cc26xx IEEE 802.15.4 2.4 GHz PHY, which allows both
the 2.4 GHz and Sub GHz PHY to be used simultaneously.
Eventually, BLE will also work simultaneously on 2.4 GHz (with
arbitration).
Fixes#29883
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The SDK USB driver was missing some defines that were
accidentally deleted when updating to SDK 2.8
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Synchronized up to:
https://github.com/JuulLabs-OSS/mcuboot/commit/ce11597
- corrected bugfix JuulLabs-OSS#830 of upgrade issue in swap-move
- changed default for CONFIG_MCUBOOT_CLEANUP_ARM_CODE to n,
- added MPU register clean-up to this option
- bootutil: ecdsa: Fixed CC310 for nRF devices
- zephyr: made flash_area_erased_val() weak
- serial recovery: allow unaligned last image data chunk
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
