Refactor code making set_endpoint() helper which check validity of
input parameters.
Fix bug with usb_set_configuration() always returning true.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Include to the callback parameters also alt_setting to be able to make
right choice for ECM.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Merge cb_usb_status_composite and cb_usb_status and use common
forward_status_cb for both composite and normal devices.
Fixes#14882
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit adds support for remote wakeup and extends USB api
with a wakeup request call. Remote wakeup can be dsabled in kconfig
when a specific driver does not support this feature.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Add new status callback with usb_cfg_data parameter to be able to
identify instance callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Previously we had a set of magic #define's in board.h that would both
enable and set the GPIO controller & pin if a given board used a GPIO
for USB VBUS. Now we make it a proper Kconfig set of options that
specify if the feature is needed, the GPIO controller device name, and
pin number. In the future this should move to devicetree.
Updated the related boards that used this feature to set the Kconfig
options in the Kconfig.defconfig
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In case no transfer is ongoing, the usb_transfer_ep_callback consumes
the received data. This is however associated with the wrong test. USB
is host centric, so data reception on the device is signaled by
USB_DC_EP_DATA_OUT and not USB_DC_EP_DATA_IN.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Restore including board.h to get USB_VUSB_EN_GPIO and associate defines
if the board.h sets them. This should move to device tree in the
future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
/home/galak/git/zephyr/subsys/usb/usb_device.c: In function ‘usb_transfer_work’:
/home/galak/git/zephyr/subsys/usb/usb_device.c:1156:58: error: passing argument 4 of ‘usb_dc_ep_write’ from incompatible pointer type [-Werror=incompatible-pointer-types]
ret = usb_dc_ep_write(ep, trans->buffer, trans->bsize, &bytes);
^
In file included from /home/galak/git/zephyr/include/usb/usb_device.h:39:0,
from /home/galak/git/zephyr/subsys/usb/usb_device.c:68:
/home/galak/git/zephyr/include/drivers/usb/usb_dc.h:270:5: note: expected ‘u32_t * const {aka long unsigned int * const}’ but argument is of type ‘int *’
int usb_dc_ep_write(const u8_t ep, const u8_t *const data,
^~~~~~~~~~~~~~~
/home/galak/git/zephyr/subsys/usb/usb_device.c:1168:8: error: passing argument 4 of ‘usb_dc_ep_read_wait’ from incompatible pointer type [-Werror=incompatible-pointer-types]
&bytes);
^
In file included from /home/galak/git/zephyr/include/usb/usb_device.h:39:0,
from /home/galak/git/zephyr/subsys/usb/usb_device.c:68:
/home/galak/git/zephyr/include/drivers/usb/usb_dc.h:328:5: note: expected ‘u32_t * {aka long unsigned int *}’ but argument is of type ‘int *’
int usb_dc_ep_read_wait(u8_t ep, u8_t *data, u32_t max_data_len,
^~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When using composite devices, an error is printed during the
initialization:
| [00:00:00.000,000] <err> usb_device: set cb, ep: 0x81
|
| [00:00:00.000,000] <err> usb_device: set cb, ep: 0x1
|
| [00:00:00.000,000] <err> usb_device: set cb, ep: 0x82
|
| [00:00:00.000,000] <err> usb_device: set cb, ep: 0x2
This is actually not an error, but rather a debug message. In addition
it should not contain a new line as it is automatically added by the
logger subsystem.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
usb_dc_status_callback() parameters are interface or configuration
numbers and should be const.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
USB controller was performing the fragmentation by itself and the driver
was not aware if current chunk is the last one if data size is equal to
maximum chunk size. Some hardware controllers (i.e. in nRF52840) handle
the status stage by hardware which must be triggered after the last data
chunk.
Currently, the whole remaining data is passed to the driver, and the
driver decides whether to fragment the data internally, or send only
the chunk and report back to the stack.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Since vendor commands cannot assume that wIndex keeps interface number
we change logic trying to call every vendor handler which should check
input parameters.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for MS OS Descriptors. The patch structures already
existing code for webusb to the single place to be easy added to other
places.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add callback codes for Set/Clear Feature ENDPOINT_HALT.
These can be used to inform a function that the device stack has
received Set/Clear Feature request ENDPOINT_HALT. The function can
then abort or restart the transfer accordingly.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch reworks composite device support. It allows the
functions to be modular and the user to combine its own
functions with the USB functions of the Zephyr OS.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Implementation of Get Descriptor Request should not return interface
or endpoint descriptors in a single request without configuration
descriptor, see USB Spec. Revision 2.0, 9.4.3 Get Descriptor
This patch fixes linux kernel usbtest subtest 7 and subtest 11 errors.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The 'if condition' in usb_handle_control_transfer is diffcult
to understand. So I rewrite another version.
Fixes#7340
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Add new status event indicating an interface has been selected.
Interface and its endpoint(s) are enabled.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The transfer API provides 'high' level functions to manage sending and
reception of USB data. A USB (class) driver has to register the generic
usb_transfer_ep_callback as endpoint status callback in order to use
the API.
With this API, the class driver does not need to take care of low-level
usb transfer management (packet splitting, ZLP, synchronization...).
The usb_transfer methods will split transfer into multiple transactions
depending endpoint max size and controller capabilities.
Once the transfer is completed, class driver is notified by a callback.
The usb_transfer method can be executed in IRQ/atomic context.
A usb_transfer synchronous helper exists which block-waits until
transfer completion.
In write case, a transfer is complete when all data has been sent.
In read case, a transfer is complete when the exact amount of data
requested has been received or if a short-pkt (including ZLP) is
received.
transfer methods are thread-safe.
A transfer can be cancelled at any time.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
At the moment CONFIG_SYS_LOG_USB_LEVEL name does not specify that this
is log level for the Device Stack. Make it clear renaming to the
proper name.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Composite multifunction USB devices should be able to know about
configuration change, implement it through existing callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: Icbf9e542b23208890a3a32358447d44cdc274ef1
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix doxygen comment typos used to generate API docs
Change-Id: I3efff6f5fa26f87d1e658d6336fef01ce45f5bb0
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
