Generate ZEPHYR_{MODULE_NAME}_MODULE for existent modules
for unittests as well since they may be using Zephyr modules.
Fixes: 64348
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Suggest users to use "west config manifest.project-filter +canopennode"
instead of "west config manifest.group-filter +optional" in the sample
documentation to avoid pulling in unrelated, optional modules.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add the len_max rx structure member to indicate maximum number of bytes
possible to receive. It is needed to send information about our protocol
parameters to host.
Also, limit the maximum size of request/responses for backends that uses
buffers provided by the handler.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
This reverts commit 97bb67d66c.
The revised FIFO draining seems to cause failures due
to channel shift with Intel MTL platform.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
z_acpi_get_cpu() used to retrieve the local apic on enabled CPU, where
n was about the n'th enabled CPU, not just the n'th local apic.
The system indeed keeps local apic info also about non-enabled CPU,
and we don't care about these as there is nothing to do about it.
This issue exists on up_squared board for instance, but it's a common
one anyway.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some tests use a "common" directory to store pieces of code which
are reused by different scenarios. In those cases, no test yaml is
found within such director nor within its parents.
If no test yaml is found in a directory, and the directory is called
common, also look in collocated directories if they have test yamls.
If so, add all those locations to the scope.
E.g. tests/bluetooth/controller/common
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The script was not resolving all detected changes uniformly:
find_excludes() could skip or not certain patterns based on
required testing scope. The idea was to not include files
that were already handled by find_test() and find_boards() workflows.
However, only boards and tests folders could be removed but
not samples. This also led to blind spots: changes in some files
were not triggering any tests. E.g. change in a test/common, where
no corresponding yaml can be found by find_tests() which is also
ignored by find_excludes(). In the new workflow a list of resolved
files (for which find_arch(), find_tests() or find_boards()
found scope) is created. Instead of using skip in find_excludes,
files are excluded only if they were resolved.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Let the caller decide what should be done in case of the transfer failure.
It will reduce the number of error log prints when the i2c scan is
called for the bus where nothing is connected.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
When CONFIG_LOG_FMT_SECTION is enabled then module name strings
are also placed in the dedicated section used for all logging
strings.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
When UART dictionary frontend is used strings can be removed
from the binary.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add option to remove string literals which are constant and
never touched by the firmware. It can save significant amount
of RO memory.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add support for getting strings from section which is not part
of the binary.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Added memory region which is intended to be removed from the final
binary but may be using in byproduct to extract data used by the
host tools (e.g. strings used by logging).
Add devnull region to Cortex-M and RISCV linker scripts.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Enabling the core dump via memory window backend only makes sense on
Intel ADSP platform wtih memory windows enabled.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The DEBUG_COREDUMP_BACKEND_LOGGING option should automatically
select LOG Kconfig instead of just depending on it.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
When no parameters are given to the 'bt' command it prints
the help message. The 'iso' command responds with 'missing
subcommand'. This commit updates the behaviour of the iso
command so that it behaves the same as the bt command, i.e.
prints a help message
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Some RTCs don't support the tm_yday and/or tm_wday fields
of the struct rtc_time structure. These RTCs must set the
values of the fields to -1 if they are not supported, and
the test must be able to handle this correctly. This commit
adds an exception to the tm_yday and tm_wday fields allowing
them to be set to -1.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
In the documentation recently started to appear ':orphan:', which is
marking for orphaned page. Use start-after to include after marking.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If user adds IPv6 address to the network interface, check
if the address is a multicast one and add it to multicast
group if it is.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user adds IPv4 address to the network interface, check
if the address is a multicast one and add it to multicast
group if it is.
Fixes#64389
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Default behaviour should only bind to port independent of IP, this
allows even multicast/broadcast L4 traffic to be received.
User can always specify a specific address to bind using shell or
Kconfig or API.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Using a generic IP for address set failures is confusing, esp. two same
prints (one for v4 and the other for v6), so, use explicit version.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This has several advantages:
1. we don't need any hard assumptions about symbol length. The
current hard-coded limit of 32 characters might well be not true.
2. replaces a lot of code for reading those names with a single
call to a 1-line function to calculate string location.
3. eliminates the need to allocate buffers for exported symbol names
by replacing them with a simple pointer assignment.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Instead of first allocating all sections and then copying then,
create a helper function to allocate and copy a single section and
call it for all appropriate sections. We need to call this function
from another location when copying string sections.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Some compilers (e.g. riscv32) does not handle well complex macros
for logging. Generated code is bigger than expected (e.g. riscv32
code is almost twice bigger than cortex-m code). Use of logging can
lead to unexpected code increase.
To handle that an analysis of the zephyr code base was performed and
it shown that 75-80% of logs are simple strings with 0 arguments
(~45%), one 32 bit argument (~26%) or two 32 bit arguments (~6%).
Given that a set of dedicated macro were created which are applied
to those 3 cases which on 32 bit platform create very simple log
messages without padding or alignment needed.
Such dedicated macros save up to 40% of code (riscv32) and also
executes 30% faster (arm cortex and riscv32).
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add Z_CBPRINTF_IS_WORD_NUM(x) which determines if argument is a
number that can fit in 32 bit word. It is used by logging macros
optimized for handling strings with numeric arguments.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Extend frontend API with optional set of functions which can
be used when simplified log message handling is enabled. If this
mode is enabled then there are dedicated macros for processing the
most common messages (string + 0-2 word arguments). Using this API
can speed up the processing of messages that are the most common.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
