The way the code is structured the buffer is always guaranteed to be
large enough, however perform explicit termination anyway to avoid
Coverity warnings.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tweak ROM usage of quark_se_c1000_devboard so that test_usbnet
test will pass. The board just disables network statistics as
that is not really needed here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We update 'blink_led', 'fade_led' and 'rgb_led' to support dt generated
defines for the PWM info needed for each. Since hexiwear_k64 supports
generating the info, moved the support for hexiwear_k64 to just use the
dt generated defines.
For 'blink_led' and 'fade_led' we use an alias in dt called 'pwm-led0'.
For 'rgb_led' we use aliases 'red-pwm-led', 'green-pwm-led' and
'blue-pwm-led'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The wncm14a2a modem is an add-on/shield and not part of the frdm_k64f
board and should be maintained and configured outside of the board.
This needs to be moved to a shield, see #10965.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The task_profiler is not needed nor used by zperf so remove
it from CMakefile.
Fixes#11051
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The DTS changes introduced in 7ae220c845
changes the naming of GPIO related macros. This updates the usage
of previous macros via DTS fixup.
Fixes#10993
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The USB mass storage documentation was completely outdated. Rewrite it
using reStructuredText, and mentioning the two possible overlays.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move configuration to overlay-netusb.sonf, enable zero-configuration,
working with LLMNR in Windows and avahi-autoipd in Linux.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move the GPIO info for the buttons into the dts, this lets us match what
all other boards are doing. Update some sample & test code to use the
dts generated SW0_GPIO_CONTROLLER define instead of SW0_GPIO_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We don't need board.h, but by including it we would end up picking up
stdio.h from somewhere which we need for sprintf. So just included
stdio.h and drop board.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For blink_led, fade_led, and rgb_led, we only need board.h for the
hexiwear_k64 board. Remove other references to board.h and only
include it if we are building on hexiwear_k64
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The HID mouse sample uses the GPIO to read the state of a button, but
does not enable CONFIG_GPIO, causing the example to fail. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Adds a new configuration to the peripheral_hr sample that utilizes the
frdm_kw41z as a ble controller shield.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Stop specifying that the 'remote' app should use the same board as the
root app.
Also, add assertions to make sure that the user does not try to
override the board that is specified in the app build scripts.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Stop specifying that the OpenAMP 'remote' app should use the same
board as the root app.
Also, add assertions to make sure that the user does not try to
override the board's that are specified in the app build scripts.
This fixes#10345
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Defined common publisher i.e. gen_level_publisher() for
all three gen. level related messahe handlers.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
The BBC micro:bit uses a baudrate of 115200 for the hci_uart
sample. Add a note about this to avoid any confusion.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Add a new "heartbeat" message so that number of hops between nodes can
be discovered. Also add a statistics page which can be toggled using a
long key press, showing local information and the top message senders.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If user aggresively vary the state then previous mechanism
failed to publish status of other bounded states since it
has to publish multiple things back to back.
This PR repair the things.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
If transition is in process, then as per current implementation bound
states only respond with Present value. But with this commit, now
bound states too would respond with present, target & remaining time
values in status response.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Redefine opcode values for Vendor Model to mimic like
Generic OnOff Server opcode values for sake of convenience.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Now in case of Generic Delta handler, if message with same TID
received after 6 seconds with same source address would consider
as new transaction instead of ignoring it.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
With this commit it is now possible to save some Mesh Model
Servers State on SoC flash. This impacts initialization &
state binding after NODE reset & that is why some additional
modification has done as per requirements & removed some
code & comments which are redundant as per current
implementation.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
In general, Bluetooth Mesh provisioning process could be failed
because of any reason. Using some h/w interrupt we can call
bt_mesh_reset() or something which will push device into factory
reset mode.
But with some actual products it is not always possible or feasible
to add extra h/w to achieve this goal.
This commit adds facility to push device into factory reset mode
using power reset. As per current implementation user have to
do 5 times reset so that gap between two consecutive reset
should not exceed 7 seconds.
Co-authored-by: Laczen JMS <laczenjms@gmail.com>
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
