Printing the file descriptor does not give any information when
the network interface creation fails, so print errno here instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rather than having each driver have its own slightly different way of
generating a random mac address, add a helper function that they all can
call so we do it one way.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The current design of the network-specific stack dumping APIs
is fundamentally unsafe. You cannot properly dump stack data
without information which is only available in the thread object.
In addition, this infrastructure is unnecessary. There is already
a core shell command which dumps stack information for all
active threads.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If the Ethernet driver has VLAN enabled (only native_posix, mcux
or gmac has VLAN supported), then the iface pointer in ethernet
context should contain the main network interface. This is needed
so that the interface will get link address set to it properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TCP segment with several EOL TCP options causes echo server to block and
use 100% of CPU. This patch fixes that issue by using k_yield to let
also other threads to run.
Fixes#21949
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Don't sleep 50ms after each received packet, sleep only when there
wasn't anything to receive. Otherwise data could get stuck for a long
time if there was more than 20 packets coming in per second. The
read() call on a TUN/TAP device returns only a single packet per call.
Also remove the call to eth_stats_update_errors_rx() because this else
clause isn't actually a receive error, we're just waiting for more
packets.
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
This is mainly testing purpose from native_posize ethernet
driver. Enable CONFIG_ETH_NATIVE_POSIX_VLAN_TAG_STRIP to have
VLAN tag strip feature on ethernet Rx frames.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Remove magic numbers from Ethernet drivers and tests by defining
NET_ETH_MAX_DATAGRAM_SIZE and NET_ETH_MAX_FRAME_SIZE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use the new API where relevant. Only sam_gmac is left aside for now.
This simplifies a lot the code as the caller should only care about
allocating net_pkt and its buffer once, and thus will not need to mess
with "frags" etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need to reserve any space for each frag, as the l2 will
allocate a frag for the ethernet header, arp will do the same.
This is one step further to removing the concept of ll reserve.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Update such statistic on all drivers.
Also, remove TX stats in native and stellaris drivers: such update is
done in L2 now.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The PTP driver was init too late which prevented gPTP from
working in native_posix board.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If compiling with gPTP support for native_posix board, then avoid
compile error that is seen with gptp sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now instead of such path:
net_if_send_data -> L2's send -> net_if tx_queue -> net_if_tx -> driver
net_if's send
It will be:
net_if_send_data -> net_if tx_queue -> net_if_tx -> L2's send -> driver
net_if's send
Only Ethernet is adapted, but 15.4 and bt will follow up.
All Ethernet drivers are made compatible with that new scheme also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change the default behaviour of the host network interface
setup. Now user needs to execute net-setup.sh script from
net-tools project to setup host ethernet interface. The script
needs to be run as a root user. Then zephyr.exe can be started
as a normal user.
Example:
cd net-tools
sudo ./net-setup.sh
This will create zeth network interface and set IP address and
routes properly. See other command line options by typing
./net-setup.sh --help
Old behaviour is still there if one enables
CONFIG_ETH_NATIVE_POSIX_STARTUP_AUTOMATIC=y
in which case one needs to use the command
sudo --preserve-env zephyr.exe
to start the Zephyr process.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can take the zeth interface down by issuing "net iface down <idx>"
shell command. It is possible to take the interface up by typing
"net iface up <idx>" in shell. These commands are important for
native_posix as there is no physical cable that can be connected
or disconnected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to configure a program that is executed after the
network interface is created and IP address is setup.
This can be used e.g., to start wireshark to capture
the network traffic of the interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Follow the packet sending error code in the driver. If packet
cannot be sent, then return <0 to the caller and do not free
the packet. In practice this is not happening here but follow
this general rule anyway.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The advantage to this approach allows drivers for
devices that already keep statistics data on hardware
registers to use those instead, rather than try to
replicate it the same counters again within the driver
itself.
The eth_native_posix.c driver though do not benefit
from this, is modified to use the new callback system.
Suggested-by: Jukka Rissanen <jukka.rissanen@intel.com>
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
Allow gPTP code to be run as a linux process and communicate
with gPTP daemon running in linux host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Native POSIX echo server sends malformed response to echo request of
size larger than 128 bytes (default size of each network data
fragment). Wireshark notices that by tagging echo request with "No
response seen". This commit fixes that issue.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Convert couple of MSEC() calls to K_MSEC() as the timeouts
when using MSEC() are just too long.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Curently only link speed is exposed.
Opportunity taken to remove any post-fix enumerating the iface init
and/or the api: these must be generic and used by all the instances.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Create infrastructure that allows ethernet device driver to tell
if it supports network packet checksum offloading. This applies only
to IPv4, UDP or TCP checksums. The driver can enable/disable checksum
offloading separately for Tx and Rx network packets.
If the device (ethernet in this case) can calculate the network
packet checksum for IPv4, UDP or TCP, then do not calculate the
corresponding checksum by the stack itself.
Fixes#2987
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This creates zeth network interface in your host and allows user
to send and receive data sent to this network interface.
Fixes#6007
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
