This patch removes redundant tester_rsp_full public function with
wrapped tester_send function.
Change-Id: Iba517ed194e02045ca952b00b952c7608592fbbd
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
BTP Client received success response from the tester application too early,
so that next command was blocked due to pending ATT Request
Change-Id: I598c0e9e90984cac07f8b4ea265b0d6d69d3d18d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The basic is the same for both architecture, but using different
GPIO controller and pins.
Change-Id: Ie021461858736d90a47bdef2c9d5e655e2efa473
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Excluded from quark_se_ss due to insufficient RAM.
Change-Id: I75bb34c058c7c41d4f3baaf12ca110f23eb531b8
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test uses too much RAM to run on Quark SE, but we now can at least
build it for generic_arc.
Change-Id: Ibdc144303d9d9c2049e4d5d4ec637b1e4778f392
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds a sample app to utilize GPIOs on x86 side of
Arduino 101. Refer to the header of source file for
more information.
Change-Id: Ie547618b2c4fb483d85d6458bd68dd2849e1d19d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sample app which displays an incrementing
counter through the Grove LCD, with changing backlight.
Please refer to the README file on how to setup
the hardware.
Change-Id: I95c0571edaeabb281ee06f3b32fad1ab5b64d924
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a sample app to utilize the Fujitsu
MB85RC256V FRAM via I2C on Arduino 101. It does
simple read and write on the chip.
Change-Id: Ie20470f3701acb0e4fa9bc3d7b3676625839cf06
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for compilers conforming to the IAMCU calling convention
as documented by
https://github.com/hjl-tools/x86-psABI/wiki/iamcu-psABI-0.7.pdf
Change-Id: I6fd9d5bede0538b2049772e3850a5940c5dd911e
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_get() thereby making the following APIs obsolete:
task_fifo_get_wait()
task_fifo_get_wait_timeout()
_task_fifo_get()
Change-Id: Iac626d9d6d4836033e06ffd5a2ca415ab2630b1a
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the FIFO API so that the timeout parameter must be specified
when invoking task_fifo_put() thereby making the following APIs obsolete:
task_fifo_put_wait()
task_fifo_put_wait_timeout()
_task_fifo_put()
Change-Id: Ifbbfb7018fd9a71551ccba648fda6d2d59d589a6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_fifo's file header to be doxygen compliant.
Change-Id: I1b37c0cdb08c6ceecc4b18c32b5ab9e91dd202c8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mutex API so that the timeout parameter must be specified
when invoking task_mutex_lock() thereby obsoleting the following APIs:
task_mutex_lock_wait()
task_mutex_lock_wait_timeout()
_task_mutex_lock()
Change-Id: I15d4bddbdc2707b3cbdab672498170da1c47b8db
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_mutex's file header to be doxygen compliant.
Change-Id: I5c5edfb70fa0cf4c6664bc21ce3869b1c22a4e71
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_pool API so that the timeout parameter must be specified
when invoking task_mem_pool_alloc() thereby obsoleting the following APIs:
task_mem_pool_alloc_wait()
task_mem_pool_alloc_wait_alloc()
_task_mem_pool_alloc()
Change-Id: Ifa88f13bca98ca3c7d0e1a3b64b40a00068619e0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mem_map API so that the timeout parameter must be specified
when invoking task_mem_map_alloc() thereby obsoleting the following APIs:
task_mem_map_alloc_wait()
task_mem_map_alloc_wait_alloc()
_task_mem_map_alloc()
Change-Id: I8905d07fa4b8c3729ca144e8f09e7ad0c7bf0f43
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_map's file header to be doxygen compliant.
Change-Id: Id0d90e893883756c91bb5de3c2f5fdc20f40dc6b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_group_take() thereby obsoleting the following APIs:
task_sem_group_take_wait()
task_sem_group_take_wait_timeout()
_task_sem_group_take()
Change-Id: I64e3f4c9f1e74a86b49d4a0e55b82ecee7733220
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the semaphore API so that the timeout parameter must be specified
when invoking task_sem_take() thereby obsoleting the following APIs:
task_sem_take_wait()
task_sem_take_wait_timeout()
_task_sem_take()
Change-Id: I746d5c966a3b81ffe014333af51aa10ea8a63263
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_sema's file header to be doxygen compliant.
Change-Id: Ia5945a64ae597239c9f5ff9ca14231625b9cb467
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_get() thereby obsoleting the following APIs:
task_pipe_get_wait()
task_pipe_get_wait_timeout()
_task_pipe_get()
Change-Id: If249e57d086fef15fdc1616965f53b310ac9cf9d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the pipe API so that the timeout parameter must be specified
when invoking task_pipe_put() thereby obsoletingg the following APIs:
task_pipe_put_wait()
task_pipe_put_wait_timeout()
_task_pipe_put()
Change-Id: Ie5693716828e9d8681434c0d130792279ab97acc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the test_pipe file header to be doxygen compliant.
Change-Id: I6761fb5078c08d9968482baba47758e0bc3fd0d9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_data_block_get() thereby obsoleting the
following APIs:
task_mbox_data_block_get_wait()
task_mbox_data_block_get_wait_timeout()
_task_mbox_data_block_get()
Change-Id: I284be505e6de792ba5483611d1299063162550e1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the event AIP so that the timeout parameter must be specified
when invoking task_event_recv() thereby making the following APIs obsolete:
task_event_recv()
task_event_recv_wait()
task_event_recv_wait_timeout()
_task_event_recv()
Change-Id: I165a8efbdedb431fee0c20e9ad1f1942c04124c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts test_events' file header to be doxygen compliant.
Change-Id: I75f0fafbe7c7b81abda1db94fea3194962a446ba
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the task IRQ API so that not only does task_irq_test() become
task_irq_wait(), but that the timeout parameter must also be specified.
Use of task_irq_wait() obsoletes the following APIs:
task_irq_test()
task_irq_test_wait()
task_irq_test_wait_timeout()
_task_irq_test()
Change-Id: Ie4d15f29941429249e9fbb258d29ec2b3ae73a93
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_get() thereby obsoleting the following APIs:
task_mbox_get_wait()
task_mbox_get_wait_timeout()
_task_mbox_get()
Change-Id: Ie028223ec342666e61d3d69750aec37dbe2b493e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the mailbox API so that the timeout parameter must be specified
when invoking task_mbox_put() thereby obsoleting the following APIs:
task_mbox_put_wait()
task_mbox_put_wait_timeout()
_task_mbox_put()
Change-Id: I174857bdf32fe7e59b79838185666cd557312814
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the test_mail file header to be doxygen compliant.
Change-Id: I890eeb8bfd2ac5ea16d06ad2f4ec0bbb00a77d79
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add a build test for the dw_aio_comparator driver to catch any compilation
issue.
Change-Id: Id9c8e49656f1fd5843183fdd2cd0eb8d53fc8c8a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a build test for the i2c_quark_se_ss driver to catch any compilation
issue.
Change-Id: Id7342c07f3630252a9a06b4afde9eea8f423287d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
clflush and mfence are not supported on `iamcu'
Change-Id: I25b7c582de3b8e2bbea3f219d4655c16763410f8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To many people, IPI connotes inter-processor interrupts on SMP
systems. Rename this to IPM, or Inter-Processor Mailboxes.
Change-Id: I032815e23c69a8297c0a43992132441c240fb71e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that the H:4 driver is the default it doesn't have to be
explicitly enabled anymore. The only exception is the "no default
driver" option that's needed by the test_bluetooth unit test.
Change-Id: Ie582d51202714e314b76ffa9659c7a232a18fc1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll in the future also have a three-wire UART (H:5) HCI driver, so
the current H:4 driver cannot have a generic name.
Change-Id: Id326ae63d6f4d273d0d0c6120143e2f8d62968d1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want fine-grained control of connection parameters.
The two APIs to provide this through are bt_le_set_auto_conn() as well
as bt_conn_create_le().
Change-Id: If5cddbbf017b868d768d18d2a09daf4af8aa00d8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add command for choosing the default connection.
Change-Id: Id100320f31cb0e99ab48b162b466f52f6273018a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
