This patch adds a x86_64 architecture and qemu_x86_64 board to Zephyr.
Only the basic architecture support needed to run 64 bit code is
added; no drivers are added, though a low-level console exists and is
wired to printk().
The support is built on top of a "X86 underkernel" layer, which can be
built in isolation as a unit test on a Linux host.
Limitations:
+ Right now the SDK lacks an x86_64 toolchain. The build will fall
back to a host toolchain if it finds no cross compiler defined,
which is tested to work on gcc 8.2.1 right now.
+ No x87/SSE/AVX usage is allowed. This is a stronger limitation than
other architectures where the instructions work from one thread even
if the context switch code doesn't support it. We are passing
-no-sse to prevent gcc from automatically generating SSE
instructions for non-floating-point purposes, which has the side
effect of changing the ABI. Future work to handle the FPU registers
will need to be combined with an "application" ABI distinct from the
kernel one (or just to require USERSPACE).
+ Paging is enabled (it has to be in long mode), but is a 1:1 mapping
of all memory. No MMU/USERSPACE support yet.
+ We are building with -mno-red-zone for stack size reasons, but this
is a valuable optimization. Enabling it requires automatic stack
switching, which requires a TSS, which means it has to happen after
MMU support.
+ The OS runs in 64 bit mode, but for compatibility reasons is
compiled to the 32 bit "X32" ABI. So while the full 64 bit
registers and instruction set are available, C pointers are 32 bits
long and Zephyr is constrained to run in the bottom 4G of memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Currently there is a mixed approach in prefixes from mbedTLS
configuration (MBEDTLS_ and TLS_). The latter was used in generic config
file and could bring up confusion that it can only be used with TLS
subsystem. Hence unify the approach to MBEDTLS_ prefix to avoid such
confusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
The latest mbedTLS (2.12) release increased resources requirements on
Zephyr, so it was required increasing the minimum SRAM to run this test
and the main stack size.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
While it's possible to define which mbedTLS config header to use, our
samples should use config-tls-generic.h as default because this header
is configurable through Kconfig.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Some changes were made in the sample implementation that made the test
fail due to differences in the expected output.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Find the device and query its capabilities just once at boot, then
go through a list of tests to perform.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Printing the output length for all encryption/decryption operation will
make it easier to know if a particular crypto driver shim provides this
information. TinyCript and mbedTLS were not providing this, making the
out_len field useless.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Following tests were failing on a microcontroller with 32KB flash:
test-mbedtls
kernel.common
The min_flash option has been added in the test case yaml files.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
When testing whether the CTR mode decrypted the payload properly, a
comparison of `decrypt.out_buf` with the known plain text `plaintext`
is performed, but the buffer comparison that is printed uses
`plaintext` and `encrypt.out_buf` instead.
Coverity-CID: 181847
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Those are added by sanitycheck, no need to have them enabled in the
project by default.
CONFIG_DEBUG is causing issues on qemu_nios2, see #5743.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The output of those samples can be parsed and verified by sanitycheck,
so lets use the console harness for this.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Normalizing variables names and make sure tag handling behavior, which
might be different among backends, does not make the test failing.
Also, improving debug logs in case of error.
Change-Id: Ic317948aab459bfa75c9a72ac48cb2d12a0d0706
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the encryption/decryption failed there is no need to procceed
further.
Change-Id: If450e40ed6fd601b698b74c56ae21fc7f903d087
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We have many testcases doing filtering both on the architecture level
and the platform level, which is redundant. Also many testcases are
running the same test twice on the same SoC for no good reason, cleanup
the tests and cleanup the filtering.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sys log already break a line after each line, by default, so removing
the '\n' on log messages.
Enabling support for sys log colors.
Change-Id: Ica3a601aba0bbbd2d9438b41fb7bca0aad9c05f4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Don't return without freeing the session when relevant.
Change-Id: I9e5903791f8eb54026c4bb2ddda9f1fe9f3f7bb3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08c682bfc0b80dfa88de859e90a011bcd2db2762
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some files made it through review process with full license header.
Change-Id: I2722b127c40b4b19500042c12e4fde85a165bae9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A sample application to illustrate the usage of crypto APIs.
This shows the usage of AES - CTR, CBC and CCM based encryption
and decryption.
origin: original
Change-Id: I17e4d966a70169b71a754c9cdc3f713a5d0c3ac0
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
