Sanitycheck discards test instances if a set of given coditions
is not fulfilled. This leads to empty test results for these
instances. This can introduce ambiguity with results that are
missing due to some bugs in the framework. This commit fills
the results for skipped tests with 'skipped' states and provides
the reason for filtering them out in the msg field. The commit
also fixes the way sanitycheck counts and reports tests/test cases
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The USART_IntGet() function seems to return masked interrupts in the
function uart_gecko_irq_tx_ready() where it should return only
non-masked interrupts. Using USART_IntGetEnabled() fixes this issue.
This issue was discovered when using the mcumgr UART backend in the
uart_mcumgr_isr() function.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
This commit adds support for Silicon Labs BRD4180A (a.k.a. SLWRB4180A)
Mighty Gecko Radio Board
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
The EFR32MG21 uses a different kind of GPIO routing for peripherals.
It is based on the GPIO registers and no longer peripherals' registers.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
The EFR32MG21 uses a different kind of clock for watchdogs.
It requires an additional peripheral-id parameter in the dts to get the
proper clock as it is based on the watchdog's ID i.e., cmuClock_WDOG#.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
The EFR32MG21 uses a different kind of GPIO routing for peripherals.
It is based on the GPIO registers and no longer peripherals' registers.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
Use the GPIO API from emlib instead of accessing the register directly:
The emlib API is doing the checks and uses the proper registers
depending on the SoC used.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
Some parameters (e.g., tuning capacitors) can be configured in the
CMU_HFXOInit_TypeDef and CMU_LFXOInit_TypeDef structures before calling
CMU_HFXOInit() and CMU_LFXOInit() during clock initialisation.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
Notify L2CAP when pairing procedure fails during SMP pairing
process. L2CAP needs to be notified so that it can cancel
ongoing connection-oriented channel requests.
Rename bt_l2cap_encrypt_change to bt_l2cap_security_changed and
call it from bt_conn_security_changed always, so that L2CAP
is informed when changing security fails.
This also fixes security_changed conn callback not called when
auth_complete returns an error.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Avoid warning in att_handle_rsp, only call this when there is a
pending ATT request. This avoids a warning happens when elevating
security fails but higher security had not been requested by an
ATT request.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
squash! Bluetooth: ATT: Remove warning when no ATT process pending
Elevate the security level before sending the connection request if
the application has set a required security level on the channel.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Elevate the security level of the connection when the l2cap channel
connect request is denied with encryption or authentication error
code.
The l2cap channel required_sec_level was used, but this is not
correct as this is set by the user of the API. This resulted in
the call to bt_conn_set_security seeing that the current security
level was already set, decide there is nothing to be done and return
success.
Fixes: #27220
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use safe for-each loop in bt_l2cap_encrypt_change since dynamic
channels with pending connection-oriented channel requests will
be canceled and removed from the list if the encryption change
failed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Document change in how L2CAP RX MTU is set through Kconfig options.
Document recommended new value for applications that have set
CONFIG_BT_RX_BUF_LEN.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove dependency on CONFIG_BT_ACL_FLOW_CONTROL and use
CONFIG_BT_L2CAP_RX_MTU always to set L2CAP RX MTU.
The ATT MTU is set from two different KConfig options depending
on if CONFIG_BT_ACL_FLOW_CONTROL is enabled, which makes it
a confusing option and hard to provide a conf file that
supports multiple board configurations.
This changes the behavior when CONFIG_BT_ACL_FLOW_CONTROL and
CONFIG_BT_BUF_RX_LEN was used to set the L2CAP RX MTU, and by
extension the ATT MTU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix smp_svr Bluetooth configuration for when BT_HCI_ACL_FLOW_CONTROL
option has been enabled. In this case the CONFIG_BT_L2CAP_RX_MTU
is used instead of CONFIG_BT_RX_BUF_LEN to set the RX MTU.
This lead to a negotiated MTU of 23, which is not supported by
the SMP_SVP protocol.
Removed the board specific configuration files as these are just
duplications of the overlay-bt.conf or overlay-bt-tiny.conf and
the readme specifies how these should be used.
Reduced the TX MTU to end up with the same value as the RX MTU,
CONFIG_BT_RX_BUF_LEN - 4 (HCI ACL header) - 4 (L2CAP header).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Removes 'flash' command function that displays the command's subset.
Command's subset will still be displayed in current code.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
On large memory areas printing 8 bytes/line is not enough.
Increased printing 16 bytes per line.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Adds unaligned and pattern write functionality.
The reason this was added is chips with large pages, e.g. 256 can't be
normaly writen via shell, thus the need to write a pattern with any
length to a memory area.
The unaligned write command allows writing a data frament in any place
in memory, the data backup, protection, erasing and writing is
automaticaly handled. This makes it easier to test all flash controller
functionality in one command, also write any persistent data to any
flash address.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Unaligned read-out capability become fact among all drivers.
Let's cut this in stone as API requirement.
fixes#16439
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Clean up comment typos and wording for expect data functions.
Add a cast to (void *) to match convention set in expect value;
this allows the caller to avoid casting on every single call.
Signed-off-by: Jett Rink <jettrink@google.com>
If you tried to use more mock parameters than were set in
CONFIG_ZTEST_PARAMETER_COUNT, you would get a random seg fault somewhere
unrelated to the mocking parameter as we would use memory past an array
bounds.
Signed-off-by: Jett Rink <jettrink@google.com>
If one enables mocking, then they most likely want more than 1 mockable
or verifiable parameter by default. Bump the default number of mockable
parameters to 10 to handle most cases without needing to touch an
additional Kconfig option.
Signed-off-by: Jett Rink <jettrink@google.com>
Add HSI divisor support for clock tree configuration.
Removed HSI calibration trimming to comply with
common STM32 implementation and use reset default
configuration instead.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Adds preprocessor clock feasibility check to avoid setting
too high clocks to SYSCLK,AHB,APBx buses.
Also checks if CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC
matches with the desired clock configuration by
the M7 core.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Fixed wrong usage of assertions.
Assertions should check that the value is in range and
not out of range.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
Fixes#27212 by setting the AHB/APBx dividers
prior to configuring the PLL as clock source.
Prevents going over the limits of APBx clocks when
choosing the PLL as system clock source for
high frequencies (close to 480MHz)
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
This commit adds description of the build setting support in the
module.yml file.
It is described how additional board_root, soc_root, dts_root, and
arch_root can be appended to the build system.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit restructures the Zephyr module description.
It places the description of the module yaml file in a dedicated section
as this file is common to module inclusion both when using `west` and
without `west`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #25215
This commit introduces the possibility of defining ROOTs in a Zephyr
module and have it automatically appended to list of other ROOTs.
Supported with this commit:
- BOARD_ROOT
- SOC_ROOT
- DTS_ROOT
- ARCH_ROOT
In order to support this in Zephyr module files, the detection of west
has been moved to dedicated west.cmake file and included immediately
after python.cmake.
Also the inclusion of zephyr_modules.cmake has moved before first use
of BOARD_ROOT.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit aligns ARCH_ROOT to conform to BOARD_ROOT, DTS_ROOT,
SOC_ROOT that all allows list of directories.
Also it avoid code, such as:
if(BOARD STREQUAL my_board_using_out_of_tree_arch)
set(ARCH_ROOT some/out/of/tree/arch/path)
endif()
in application CMakeLists.txt.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Include directories for ${ARCH} is not specified correctly.
Several places in Zephyr, the include directories are specified as:
${ZEPHYR_BASE}/arch/${ARCH}/include
the correct line is:
${ARCH_DIR}/${ARCH}/include
to correctly support out of tree archs.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces support for multiple SOC_ROOT.
This means that additional SOC_ROOTs specified using -DSOC_ROOT as
argument to CMake will be forming a list together with ${ZEPHYR_BASE}.
This allows for greater flexibility, as developers can now specify
multiple out-of-tree SoCs and not worry about the SoC used for the
board they compile for.
Also it avoid code, such as:
if(BOARD STREQUAL my_board_using_out_of_tree_soc)
set(SOC_ROOT some/out/of/tree/soc/path)
endif()
in application CMakeLists.txt.
Finally, allowing multiple SOC_ROOTs prepares for specifying SOC_ROOTs
in Zephyr modules.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit relocates the generated Kconfig.modules file from
${CMAKE_BINARY_DIR} into ${CMAKE_BINARY_DIR}/Kconfig.
This is done as preparation of multiple SOC and ARCH root support.
A single Kconfig folder inside ${CMAKE_BINARY_DIR} helps to keep the
build folder tidy.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
