Add a new sifive,plic-1.0.0 binding that inherits from the riscv,plic0
binding. The new binding adds a required riscv,ndev property, which
gives the number of external interrupts supported.
Use the new binding for microsemi-miv.dtsi (with a value of 31 for
riscv,ndev, from http://www.actel.com/ipdocs/MiV_RV32IMAF_L1_AHB_HB.pdf)
and riscv32-fe310.dtsi (which already assigns riscv,ndev).
Also remove a spurious riscv,ndev assignment from
riscv32-litex-vexriscv.dtsi.
Also make edtlib and the old scripts/dts/ scripts replace '.' in
compatible strings with '_' when generating identifiers.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We generated a define for each instance to convey its existance of the
form:
#define DT_<COMPAT>_<INSTANCE> 1
However we renamed all other instance defines to be of the form
DT_INST_<INSTANCE>_<FOO>. To make things consistent we now generate a
define of the form:
#define DT_INST_<INSTANCE>_<COMPAT> 1
We also now deprecate the DT_<COMPAT>_<INSTANCE> form and fixup all uses
to use the new form.
Fixes: #17650
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a new DTS/binding parser to scripts/dts/ for generating
generated_dts_board.conf and generated_dts_board_unfixed.h.
The old code is kept to generate some deprecated defines, using the
--deprecated-only flag. It will be removed later.
The new parser is implemented in three files in scripts/dts/:
dtlib.py:
A low-level .dts parsing library. This is similar to devicetree.py in
the old code, but is a general robust DTS parser that doesn't rely on
preprocessing.
edtlib.py (e for extended):
A library built on top of dtlib.py that brings together data from DTS
files and bindings and creates Device instances with all the data for
a device.
gen_defines.py:
A script that uses edtlib.py to generate generated_dts_board.conf and
generated_dts_board_unfixed.h. Corresponds to extract_dts_includes.py
and the files in extract/ in the old code.
testdtlib.py:
Test suite for dtlib.py. Can be run directly as a script.
testedtlib.py (uses test.dts and test-bindings/):
Test suite for edtlib.py. Can be run directly as a script.
The test suites will be run automatically in CI.
The new code turns some things that were warnings (or not checked) in
the old code into errors, like missing properties that are specified
with 'category: required' in the binding for the node.
The code includes lots of documentation and tries to give helpful error
messages instead of Python errors.
Co-authored-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
--deprecate-only sounded like a command to "only deprecate (something)"
to me at first. --deprecated-only might make it clearer that it's about
only generating deprecated stuff.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
No binding has anything but 'version: 0.1', and the code in scripts/dts/
never does anything with it except print a warning if it isn't there.
It's undocumented what it means.
I suspect it's overkill if it's meant to be the binding format version.
If we'd need to tell different versions from each other, we could change
some other minor thing in the format, and it probably won't be needed.
Remove the 'version' fields from the bindings and the warning from the
scripts/dts/ scripts.
The new device tree script will give an error when unknown fields appear
in bindings.
The deletion was done with
git ls-files 'dts/bindings/*.yaml' | xargs sed -i '/^\s*version: /d'
Some blank lines at the beginning of bindings were removed as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit adds a DTCM (Device Tightly Coupled Memory) section for
Cortex F7 MCUs. The Address and length is defined in the corresponding
device tree file.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
We don't use the DT_FLASH_AREA_*_LABEL defines today so lets mark them
deprecated until we actually need something.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Remove dead code that referenced 'generation' but didn't do anything
with it
* Replace looking at 'generation' with a simple check for property
starting with # (for things like #address-cells, etc) or ending in
-map (for things like gpio-map) to skip
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
uint8-array is the name for what the devicetree specification calls a
bytestring.
The original parsing code treated square brackets as equivalent to
quotes or angle brackets, failing to interpret elements as hex-encoded.
This was a bug, corrected in this patch by processing content as a
sequence of hex-encoded bytes with arbitrary whitespace.
The original generating code emitted the property as individual
elements. Replace that with generation of a single structure
initializer, which is more useful in cases where the length of a
property value may vary between nodes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
For using alpha numeric property values in a devicetree node, we
need to match the values starts with a number. Current scenario will
return the value as a numeric literal if it starts with a number. This
will not work for a compatible like, "96b-ls-con" which is proposed in
issue #15598.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
We don't have any uses of this form of define so deprecate it for now.
If needed this should be DT_INST_<INSTANCE ID>_<COMPAT>_BUS_<BUS>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we've converted LED and SW to use DT_ prefix we can mark the
non-DT_ prefixed versions as deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we've converted all _GPIO_ to _GPIOS_ we can mark the _GPIO_
form as deprecated (same for _PWM_ / _PWMS_).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A number of minor issues with the 'fixed-clock' support:
* Fix the #clock-cells to be 0
* Fix nxp_ke1xf.dtsi to set #clock-cells 0 and the clock reference to
only be a phandle.
* Fix the generation script to only generate what it should for a
'fixed-clock'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds generation of `*_FIXED_CLOCK_FREQUENCY` macros for
clock consuming nodes that are provided with a fixed rate clock.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch is needed in order to get compilable macros for compatibles
like "arm,cortex-m0+".
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use Device Tree,and in particular a new 'bt-c2h-uart' to select which
UART is being used to communicate with an external BLE Host when acting
as a Controller.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add support so that we can flag any "defines" associated with a call to
either extract_cells or extract_controller as deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We never set 'use-prop-name' on clock bindings so lets just always
use CLOCK_CONTROLLER as the define name we generate.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We have 'use-prop-name' flag in the bindings which is specifically used
for GPIO properties to control if we get "GPIO" or "GPIOS" as the
generated define name.
Lets remove the inconsistancy and use "GPIOS" as the preferred name as
this matches the DTS property name. Towards that we will generate both
forms and remove support for 'use-prop-name'.
This also impacts "PWM" generation. So we'll have "PWM" and "PWMS"
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the type of property is a 'array' we should generate defines as
if its a list even if theres only a single element in the list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the type of property is a 'string-list' we should generate defines as
if its a list even if theres only a single element in the list.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several bindings have an expectation of sub-nodes that describe the
actual infomation. The sub-nodes don't have any compatiable so we can't
key on that.
So we can add the concept of a sub-node to the YAML to handle cases like
'gpio-keys', 'gpio-leds', 'pwm-leds', etc..
The sub-node in the YAML is effective the "binding" params that describe
what properties should exist in the sub-node.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The alias generation wasn't doing the right thing with regards to
keeping the names consistent. We would drop the index from the define
name for aliases.
So we'd get
DT_NXP_KINETIS_GPIO_GPIO_D_IRQ
which should be
DT_NXP_KINETIS_GPIO_GPIO_D_IRQ_0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a deprecate flag to add_prop_aliases so we can make the aliases it
generates as deprecated if needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Think I understand it now, and that was the goal.
- _extract_partition() adds index-based entries. extract_partition()
adds label-based entries.
Rename them to _add_partition_index_entries() and
_add_partition_label_entries(), and call them from a top-level
extract_partition() function.
This makes the logic clearer. It took me a long time to spot it.
- Generate indicies with a simple counter and remove the _flash_area
logic. This would break if partitions were extracted more than once,
but they aren't, and now you know that they can't be.
- Rename _create_legacy_label() to add_legacy_alias() and make it
global. It doesn't use 'self'.
- Break the logic for finding the flash controller into a separate
helper function
- Add doc-comments for the new functions
- Misc. other small clean-ups
generated_dts_board.conf and generated_dts_board_unfixed.h were verified
to be identical for disco_l475_iot1 and frdm_kw41z before and after the
cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Clean up the code a bit:
- Simplify the loops over the flash 'reg' properties by using range()
- Build identifier names with a plain .format() where possible. This
makes them stand out better in the code.
- Remove redundant variables
- Move variables close to where they're used
- Misc. other minor improvements
generated_dts_board.conf and generated_dts_board_unfixed.h were verified
to be identical for disco_l475_iot1 and frdm_kw41z before and after the
cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
DT_ALIAS_<ALIAS>_<PROP> defines are a convenient and portable way to get
the device instance name despite different naming conventions used by
the device drivers.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Its possible that the <INSTANCE> number could conflict with the register
number. This is shown to happen for a device like soc-nv-flash at
address 0.
So change naming convention to DT_INST_<INSTANCE>_<COMPAT>_<PROP> and
make DT_<COMPAT>_<INSTANCE>_<PROP> as deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Because of how generate defines for instances its possible that we have
a name conflict if the instance ID and reg addr space clash.
For example on qemu_x86 there are current two 'soc-nv-flash' nodes and
one is at reg addr 0, but instance id 1, the other is reg addr 0x1000
and instance id 0. We'd possibly get this conflict:
For the 'soc-nv-flash' at 0x1000 (instance 0):
(instance define)
#define DT_SOC_NV_FLASH_0_BASE_ADDRESS 0x1000
For the 'soc-nv-flash' at 0x0 (instance 1):
(address define)
#define DT_SOC_NV_FLASH_0_BASE_ADDRESS 0x0
To deal with this we make sure that the lower reg address is instance 0,
than things work out ok. To handle this case, if we sort the instance
IDs based on reg addr than if we have something at reg addr 0, it will
also than be an instand ID 0.
The longer term solution will be to deprecated the old defines and
remove the conflict between instance ID defines and normal DT defines.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We added generation of aliases for "alt-label" (which was the outer
label of a node) for use with shields and connectors. However we've
never used these defines and the generation is a bit inconsistent.
This removes generation of defines like for label 'arduino_spi':
#define ARDUINO_SPI_BASE_ADDRESS ... (already deprecated)
#define DT_ST_STM32_SPI_FIFO_ARDUINO_SPI_BASE_ADDRESS ...
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we have something like:
#address-cells = <1>;
#size-cells = <0>;
intc: ioapic@fec00000 {
compatible = "intel,ioapic";
reg = <0xfec00000 0x100000>;
};
We should generate:
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS_0
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS_1
Instead we generated:
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS
DT_INTEL_IOAPIC_FEC00000_BASE_ADDRESS_1
This was due to logic deciding if '_0' should be used not taking into
account #address-cells & #size-cells correctly.
Fixes: #16296
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We generated some alias defines for children of a bus in which we had a
path alias for the bus node. We never used these defines, we don't
recommend they get used (child of busses should use instance defines)
and they were only generated in small handful of cases (for dts that had
path aliases to the bus node - i2c or spi).
Remove this as effectively dead code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add specific enum generation support related to usb 'maximum-speed'
property. This will generate a define with _ENUM with the integer
value of the enum as its ordered in the YAML. The assumption right
now is that there's a matching enum in the code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Allow a device tree node to be child on one bus and parent on another
bus (e.g. an I2C slave device with multiple sub-devices).
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
gpio-map is a property of "nexus node", defined in dts v0.3.
It allows to describe a pin connector so it can be referenced
through phandles and hence used in expansion device nodes like a
shield header (typically implemented through overlays).
This change implements gpio controller resolution through these maps.
Few assumptions were taken in order to simplify the implementation.
These assumptions bring some limitations to the use of gpio-map
but my understanding is that this should still allow to cover most
use cases.
Assumptions:
-gpio-size is the same for all gpio-controllers referenced in a map
-optional properties gpio-map-mask and gpio-map-pass-thru are
supposed to be omitted
The understanding of this last assumption is that flags provided in
the expansion device node will overwrite the connector flags.
In a latter stage, when need happen, these limitations can be
revisited to unlock fully fledged gpio-map usage.
Fixes#15637
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The /memreserve/ code would crash if it ever ran, because 'name' isn't
defined (seems to be some copy-paste here). There are no /memreserve/s
in Zephyr though, so it works out.
'name' seems to be the node name. Not sure what to put for a
/memreserve/, but make it '<memreserve>' to make it stand out.
Fixes a pylint warning.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Discovered with pylint3.
Use the placeholder name '_' for unproblematic unused variables. It's
what I'm used to, and pylint knows not to flag it.
Also improve the naming a bit in devicetree.py. If a key/value is known
to be a specific thing (like a node), then it's helpful to call it that
instead of something generic like "value".
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- Remove DTFlash.extract(), which was just dispatching to either
_extract_flash() or _extract_code_partition() depending on which
magic string was passed in. Call them directly instead.
- Fold constant and globally available parameter values into functions
- Remove DTFlash._flash_node. It's easy to derive wherever it's needed,
and it makes it clearer where it comes from (and means functions can
be called in any order).
- Remove DTFlash._flash_base_address, which is unused
- Remove various unused parameters to functions
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
def_label is the name used for macros and .conf file values. It can
never have a slash in it.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- Fix broken code that was meant to turn the
'interrupts'/'interrupts-extended' value into a list if it wasn't.
list(123) will error out instead of creating [123].
- Remove weird .split('/') on macro name
- Rename 'props' to 'vals'. It's the value of a single property.
- Get rid of a bare 'except:'
- Rename l_fqn to full_name. Accidentally stumbled upon 'fqn' probably
standing for "fully qualified name", but it's not obvious.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- Have get_parent_path() return None for the root ('/'). This is handy
when looping over path components.
- Move _find_parent_irq_node() out of the class, call it
parent_irq_node(), and use get_parent_path() in it.
- Add a global err() function for reporting errors. Use it if a node
unexpectedly has no interrupt-parent.
Previously, this would give a Python error instead.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
PyYAML 5.1 was just released and it doesn't support !include as
previous versions do. This breaks our DTS bindings parsing.
Let's fix our extract_dts_include.py script to work with both
3.13 and 5.1.
Also, update the pyyaml requirement to >=3.13 to be sure we're
compatible.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/14496
Signed-off-by: Michael Scott <mike@foundries.io>
To reproduce the issue this addresses, run "cmake -B96b_nitrogen"
twice with Python 3.5. Observe the order of the flash partition table
changing in:
"build{1,2}/zephyr/include/generated/generated_dts_board.conf" and
"generated_dts_board_unfixed.h"
Dictionaries are iterated in a random order by Python 3.5 and before.
This could have caused "Unstable" CI in PR #13921 and maybe others.
Anyway we want builds to be determimistic by default. Explicit
randomness can be added for better coverage but not by default.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
insert_defs() is the only function that adds keys to 'defs', and they
always get added with an 'aliases' key.
This function could get super simple if the duplicate-removal code could
be removed. It only seems to be needed to prevent duplicates for some
(unfortunately tricky) flash-related stuff now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- No deep copying is needed. The deepcopy() is just a hack to work
around that the value might not be a list. That deserves a comment at
least.
- A catch-all try/except will hide stuff like misspelled variables as
well. It's usually a bad idea.
Rewrite things to be more explicit, and add some comments.
reg.py was indirectly using the deepcopy() imported in global.py,
because it does 'from global import *'. Have it import deepcopy() itself
instead. reg.py is the only remaining user of deepcopy().
reg.py relying on the deepcopy() import in global.py was super hard to
discover, due to another catch-all try/except around the deepcopy()
call.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All nodes have a 'children' key.
Also simplify a bit. The loop is copying a dictionary verbatim.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
'/foo' was turned into ''. Turn it into '/' instead. That's how the root
is represented in 'reduced' too.
Also remove some code from get_addr_size_cells() that was only there to
work around the bug.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If a binding specifies 'generate: define' for 'interrupt-names' (like
some bindings do), then that ought to generate #defines for it, but the
scripts/dts code currently hardcodes 'interrupt-names' to be ignored
(along with some other properties).
Maybe the 'generate: define' in those bindings is a mistake, but the
code still ought to respect it. That also gets rid of some mystery code.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add some short doc comments at the beginning so that people can quickly
get an idea of what they're about.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It's confusing that "address" is often used within the same function to
refer to both node paths and e.g. address cells.
Make things easier to understand by calling /foo/bar a path instead.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
extract_property() is meant to generate #defines for a single property,
like 'foo = <1 2 3>'. Currently, it also generates node-level #defines
related to parent buses.
That makes the intent of the code hard to understand, and also means
that identical node-level #defines get redundantly added multiple times
(once per property).
Generate the node-level bus #defines before processing properties, in
generate_node_defines(). Use a new generate_bus_defines() helper.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Due to the way the code was structured,
flash.extract_partition(node_path) was called multiple times for the
same 'node_path'.
That must've been a mistake to begin with (but was hard to spot before
the code was cleaned up). Move the generation of per-node #defines out
of the property loop.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
generate_node_defines() immediately returns if the node's 'compatible'
is not in the binding.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Derive 'node_compat' and 'prop_val' (the dictionary for the property
from the YAML binding) inside extract_property().
That gives it just two parameters and makes it clearer that it's just
generating #define's for a single device tree property. 'prop_val' was
only used to look up prop_val['type'].
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Moves it closer to where it's used, and will allow other simplifications
in generate_node_defines().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
After lots of reverse-engineering, I understand why deepcopy() is used:
1) Various functions defined in scripts/dts/extract/* modify the list
of names in-place
2) A plain list.copy() won't work when the *-names property happens to
have a single name in it, because devicetree.py gives a string
instead of a list in that case
Using deepcopy() to solve (2) is very confusing (especially with no
comments), because no deep copying is actually needed.
Get rid of deepcopy(), add a helper function for fetching the names, and
some comments.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- Remove dead "if 'props' in nodes" check
- Rename the 'nodes' parameter to 'node'. It represents a single node.
- Use a defaultdict(int) for 'last_used_id' (makes unset keys give 0)
- Use a global for 'last_used_id'
- Move some related code so it appears together
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Turn
if a:
if b:
...
into
if a and b:
...
Simplify some error messages with .format() as well, and get rid of some
redundant str()s. '{0} {1} {1}'.format('foo', 'bar') gives
'foo bar bar'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- Reduce the indentation and remove the awkward line breaks. This is
possible now that there's no recursion.
- Be consistent with quotes
- Move some initialization closer to where it's used
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The recursion was used to implement 'properties:' within 'properties:'
in binding files, which seems to be a dead leftover (and undocumented).
Removing it gets rid of code and makes things more transparent.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use more descriptive naming, get rid of unused 'v' variable, and an
unnecessary None check (None won't appear in get_binding_compats()).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
...to generate_node_defines().
More explicit. "extract node include info" can be read in many ways:
- Extract a node's "include info"
- Extract node and include info
- etc.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
That way it consistently generates all #define's.
Add some related clarifying comments to main() too.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It's special-cased for merging bindings and not a general dictionary
merging function.
Also simplify the documentation a bit.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The Bindings class was only used to implement '!include foo.yaml'
(easier to see after some things were moved out of it). Use plain
functions instead, which might be a bit more transparent and gives
simpler code.
Also remove the recursive '!include' detection for now, which is broken
in that the same .yaml being included twice will always trigger it, even
for non-circular cases.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
As written, this function could take e.g. '!include bar', find 'foo-bar'
(due to the endswith()), and include it. This is undocumented and
doesn't seem to be used, so I'm guessing that it isn't intentional.
Removing that bug/feature also makes the code much simpler.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
load_bindings() is trivial, and it allows some stuff to simplified, like
the check for no bindings being found, and the assignments to the
extract.globals.{bindings,bus_bindings,bindings_compat}.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is (probably) a temporary change just to be able to move some stuff
out of the Bindings class.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Only write out to the .conf file if the define starts with "DT_". The
the conf file should only be used by sanitycheck, west, and
kconfigfunctions at this time. In the future we should remove it, so
lets limit what's it exposing at this time.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
DT_FLASH_AREA_<X>_DEV should be the label of the flash controller. For
flashes that are "jedec,spi-nor" the flash itself is considered the
controller. For "soc-nv-flash" the parent of the flash is assumed to be
the controller.
Rework the logic in how we determined DT_FLASH_AREA_<X>_DEV to handle
both cases.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
