Set the remote address of received sockets.
This is necessary for services that rely on the remote address.
DNS relies on the remote address to be set properly.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
For each of the fdtable.h functions listed below, convert the
z_ prefixed semi-private functions to use the zvfs_ prefix.
ZVFS stands for Zephyr Virtual File System and
is intended to be a common library used by the C library,
POSIX API, Networking, Filesystem, and other areas.
There are already a few functions in fdtable.h that use the
zvfs_ prefix, so this change is mostly about unifying them in
a way that uses a suitable prefix ("namespace") so that it can
be considered a public API.
- z_alloc_fd
- z_fdtable_call_ioctl
- z_finalize_fd
- z_finalize_typed_fd
- z_free_fd
- z_get_fd_obj
- z_get_fd_obj_and_vtable
- z_get_obj_lock_and_cond
- z_reserve_fd
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The supported modems don't have the same number or assignment
of DLCI channels. For example, the NRF91_SLM only has DLCI
channel 3 assigned to GNSS tunneling, where the ublox sara r5
has DLCI 3 assigned to an additional AT channel, and DLCI 4
assigned to GNSS tunneling.
This commit updates the creation and assignment of DLCI
channels and pipelinks to match the capabilties of each modem.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Fill-in the mode field of the fd_entry so that the
implementation can be made aware that the specific file
descriptors created are sockets.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add AT shell which uses the newly exposed pipes to
send/receive at commands from the modem identified by the
chosen node zephyr,at-shell.
To send an AT command, the shell command at is used, followed
by the command to send, and an optional response which
overwrites the default "OK"
For example, sending "AT", which returns "OK"
modem at at <- command
OK <- response
Enabling echo, then sending "AT" which will now return "AT" + "OK"
modem at ati1 <- command
OK <- response
at at <- command
at <- response
OK <- response
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Add two DLCI channels to the cellular modem driver, and expose
them using the modem pipelink module.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The POSIX_MAX_FDS option does not correspond to any standard
POSIX option. It was used to define the size of the file
descriptor table, which is by no means exclusively used by
POSIX (also net, fs, ...).
POSIX_MAX_FDS is being deprecated in order to ensure that
Zephyr's POSIX Kconfig variables correspond to those defined in
the specification, as of IEEE 1003.1-2017. Namely,
POSIX_OPEN_MAX. CONFIG_POSIX_MAX_OPEN_FILES is being deprecated
for the same reason.
To mitigate any possible layering violations, that option is
not user selectable. It tracks the newly added
CONFIG_ZVFS_OPEN_MAX option, which is native to Zephyr.
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_DEVICE_IO
Similarly, with this deprecation, we introduce the following
Kconfig options that map directly to standard POSIX Options by
simply removing "CONFIG":
* CONFIG_POSIX_OPEN_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options.
* CONFIG_POSIX_DEVICE_IO_ALIAS_CLOSE
* CONFIG_POSIX_DEVICE_IO_ALIAS_OPEN
* CONFIG_POSIX_DEVICE_IO_ALIAS_READ
* CONFIG_POSIX_DEVICE_IO_ALIAS_WRITE
Gate open(), close(), read(), and write() via the
CONFIG_POSIX_DEVICE_IO Kconfig option and move
implementations into device_io.c, to be conformant with the
spec.
Lastly, stage function names for upcoming ZVFS work, to be
completed as part of the LTSv3 Roadmap (e.g. zvfs_open(), ..).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The new modem_cellular driver had support for the deprecated
generic zephyr,gsm-ppp dts compatible for backwards compatibility.
zephyr,gsm-ppp is being removed, and as such, modem_cellular.c
no longer needs to support it.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
gsm_mux and uart_mux are deprecated and will be removed.
Remove integration with gsm_mux and uart_mux from modem_shell.c
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
gsm_mux and uart_mux are deprecated and will be removed.
Remove integration with gsm_mux and uart_mux from modem_shell.c
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Remove redundant `const` qualifiers in `struct modem_cellular_config` and
add `const` to the declaration to ensure the structure resides
in read-only memory (rodata).
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Adds the necessary defines with init, dial and periodic chat scripts to
support the Sequans GM02S Modem.
Modification to cxreg handler to process GM02S +CEREG response.
Signed-off-by: Thibo Verheyde <thibo@dptechnics.com>
Add missing fields to complete info struct to
chat script for Telit ME910G1. Also for test
suite modem bg95.
Signed-off-by: Jeff Welder <Jeff.Welder@ellenbytech.com>
This commit implements a network registration status API,
including return of reject cause in case of denial.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Add connect match for dialing PPP connection.
Ensure PDP authentication is disabled.
Request manufacturer, firmware version, and IMSI from the modem.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Allow not specifying the chat_filter parameter in a device
definition, which is equivalent to setting it to "".
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The nRF91 series devices, when running the Serial LTE Modem (SLM)
application starting with nRF Connect SDK 2.6.0, can now be used as
standalone modems via the generic modem_cellular driver.
A configuration to run the cellular_modem sample on the nRF9160 DK
(plugged in to another nRF91 series device running SLM) is provided.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
If the IPv6 DNS address is not a valid address, DNS will fallback
to the IPv4 DNS address.
Fix copying the IPv4 address to the IPv6 address by using
the IPv6 address destination length.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
The res param in offload_freeaddrinfo is not used.
Mark it as unused, to avoid static analysis complaining about
Parse warning (PW.PARAM_SET_BUT_NOT_USED)
Fixes CID 316235
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
info level is printed always to console and it's noisy.
Change to debug level, which can be enabled with
CONFIG_MODEM_MODULES_LOG_LEVEL_DBG
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Remove receive and transmit timeouts which are no
longer useful as the RECEIVE_READY and
TRANSMIT_IDLE events will be used to efficiently
manage timeouts between transmit/receive calls.
Then update the the in-tree drivers using the
modem_chat module to omit the process timeout
parameter.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
rssi 31 will be -51dBm or greater, where -51 is valid. Fix the
range by allowing until -51.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
This commit implements parsing of the CESQ extended signal quality AT
command, extracting RSRP and RSRQ which is relevant for LTE connections.
It's used in the U-blox SARA-R5 modem instance. Furthermore, the IMEI,
IMSI is extracted in the same modem.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
The QCCID handler is Quectel specific and as such may not be part
of the modem cellular driver which only supports commands defined
in 3GPP TS 27.007
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The modem_cellular.c driver now uses a common script to get
signal strenght, which is run on demand. This is more efficient
than polling it, and simpler since every modem doesn't have to
define their own variant of the script.
Additionally, the CSQ handler now stores the "raw" rssi value
returned from AT+CSQ to be parsed by the cellular_modem_get_signal
implementation.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Move the implementations of the cellular API in modem_cellular.c
to an cellular_driver_structure, and implement this API structure
withing the device drivers.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Fixed Kconfig to remove dependency between modem_socket and
modem_context, the two do not depend on each other and
should be possible to use independently
Signed-off-by: Alessio Lei <alelei94@yahoo.it>
