Let's simplify the parsing function which scans incoming traffic
for carriage returns and let the net_pkt_read() function cross
multiple buffers if needed. Also, gracefully skip lines which
are longer than the command buffer.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Some L2 layers such as bluetooth need to have extra buffer pools to
hold copies of packets for use with TCP. Let's add support for that
so that future enablement of other boards won't get bitten.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's migrate from using NET_LOG_* functions to the SYS_LOG
facility which allows for granular control over the display
of info, debug and error messages unique to the file that
you're in.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Let's remove all of the extra coding to handle DHCP, DNS and event
management. This is all handled by the net_app API.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
It's useless now, arduino_101 has proven not working very well with x86
gpios and CC2520 never got to work properly there.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only ieee802154 should have been using it, but it ended in various
samples that did not require it anymore once they've been using
net_app. Unlike former samples settings, net_app settings are tied to
net_app, so let's just forget about all of it and silently use net_app.
If something goes wrong in setting net options, it will be a unique
place.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This app now depends on net_app API, so it must be enabled for all
project configs we have.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
From section 3.4.5.3 in the Mesh Profile Specification 1.0:
"A node shall implement a Local Network Interface."
Removing the Kconfig option also helps clean up quite a lot of code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code was causing only one byte of data to be placed in timeout
instead of sizeof(timeout) as intended.
Coverity-CID: 170744
Fixes#4057
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's dumb, because it doesn't really parse HTTP request, just always
sends the same page in response. Even such, it's useful for socket
load testing with tools like Apache Bench (ab) and for regression
checking in the net subsystem.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
CONFIG_NET_L2_BT_ZEP1656 shall only be used with hosts that are known to
not comply with RFC 7668.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CONFIG_NET_APP_BT_NODE is required in order for the Bluetooth L2 driver
to register IPSS service.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Composite multifunction USB devices should be able to know about
configuration change, implement it through existing callback.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add information that IP addresses in prj_qemu_cortex_m3.conf file for
echo_client are set that qemu<->qemu communication could be tested.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
When TCP connection over IPv4 could not be established there was
an error about TCP connection over IPv6.
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
This file is no longer needed as IPSS service is already enabled with
CONFIG_NET_L2_BT.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is the final stage of moving the LwM2M library internals to
the net_app APIs. This means we can support DTLS and other
built-in features in the future. All of the logic for
establishing the network connection is removed from the sample
app.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The LwM2M library does not use net_app APIs internally. To help
this effort let's establish a user facing structure "lwm2m_ctx"
(similar to http_client_ctx and mqtt_ctx) and start it off by
wrappering the net_context structure.
Future patches will add user setup options to this structure and
eventually remove the net_context structure in favor of a net_app_ctx.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The DNS resolver example enables mDNS client support and then
queries zephyr.local hostname. The net-tools project has example
avahi-daemon script that will response these .local queries and
can be used in testing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Whenever a buffer is sent to the driver via bt_raw using bt_send() the
buffer might not be consumed if an error is returned. In that case
unreference the buffer to avoid leaking the already allocated net_buf.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Currently, we don't have a .conf which enabled BT. This will be
re-enabled at some future date after migrating to the full net_app
APIs by setting CONFIG_NET_APP_BT_NODE=y.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
There were bunch of config options in tests/net, net-shell and
wpan_serial sample, and those options had wrong name so they
were ignored by the code.
Fixes#1428
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a simple shell module that allows arbitrary boards with flash
driver support to explore the flash device.
- Reading, erasing, and writing by device offsets are supported in all
cases.
- If the flash page layout is available, it can be printed, and I/O
can also be done to a specified page as well.
One known issue is that writing to flash on targets that require
doubleword-sized writes (e.g STM32L4) will fail since the number of
arguments required exceeds ARGC_MAX in shell.c. Addressing that is
left to future work.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Added sample code for testing and displaying the flash layout using
the recently introduced API.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
bbc_microbit has been observed to regress on this sample and is
therefore a good candidate for CI.
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
To test BMM150 geomagnetic sensor driver in polling mode,
sample application added by this patch can be used.
Signed-off-by: Punit Vara <punit.vara@intel.com>
The IP header was stripped by _net_app_ssl_mux() when it received
IP packet. This is fine but if the application expects the get
the IP header, then there is a problem. Fix this by saving IP
header to ssl_context and then putting it back in front of the
packet when the data is passed to application.
Note that this IP header is not used by net_app when the packet
is sent because TLS/DTLS creates a tunnel for transferring packets
and user can only sent packets via this tunnel.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The default IPv6 multicast address count was too small,
increasing addresses to 5.
Jira: ZEP-2560
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The echo-server sample was using removed net_app_server_tls_disable()
function, the correct one is called net_app_server_disable()
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The stack name was incorrectly specified in mqtt_publisher sample
application, this cause compilation error when certain Kconfig
options were specified.
Jira: ZEP-2566
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The server needs global enable/disable status instead of only being
able to enable or disable just the TLS server part.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The main reason is allowing to run on 6LoWPAN devices, though also to
demonstrate IPv6 support with BSD Sockets in general.
Tested on 96b_carbon.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
POSIX requires struct sockaddr's field to be named "sa_family"
(not just "family"):
http://pubs.opengroup.org/onlinepubs/009696699/basedefs/sys/socket.h.html
This change allows to port POSIX apps easier (including writing
portable apps using BSD Sockets compatible API).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Normalizing variables names and make sure tag handling behavior, which
might be different among backends, does not make the test failing.
Also, improving debug logs in case of error.
Change-Id: Ic317948aab459bfa75c9a72ac48cb2d12a0d0706
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the encryption/decryption failed there is no need to procceed
further.
Change-Id: If450e40ed6fd601b698b74c56ae21fc7f903d087
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is how it's called in the main docs, so use this same phrase in
Kconfig and samples too.
Also, added some articles to docs.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Default BT_RX_BUF_COUNT value is not enough when transfering a large
amount of data (e.g. heavy network traffic over BT 6LoWPAN). Increase
BT_RX_BUF_COUNT from default value 3 to 10.
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Be sure to check for NULL pkt in receive callback, which means TCP
EOF. The fix ported from echo_server sample.
Jira: ZEP-2423
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
C++ standard mandates that main() return an 'int' even though
Zephyr does not use it. Fix build error with XCC compiler.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add cross-referenced information on the 96b_carbon and
96b_carbon_nrf51 pages which disambiguates between the two "boards".
Also describe how to flash 96b_carbon_nrf51 with
samples/bluetooth/hci_spi and 96b_carbon with samples/bluetooth/ipsp
to support a Bluetooth HCI stack on 96Boards Carbon (the physical
board).
While we're here, make the documentation page for 96b_carbon match the
format in doc/templates/board.tmpl.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Various of the printk messages in this sample app don't have
newlines. Let's fix the output by moving to SYS_LOG_xxx() macros
instead, which don't need them anyway. This also makes it easier to
tell errors apart from other messages, etc.
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Add a sample application that allows a Zephyr-based Bluetooth
controller to interface with an HCI driver via SPI. This sample
implements the same BT SPI protocol already as Zephyr's HCI SPI
driver.
Currently, the sample only supports the legacy SPI API.
Provide a single configuration file, avoiding board-specific
files. Some board-specific configuration information must be provided
via other means:
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_DEV_NAME
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_IRQ_DEV_NAME
- CONFIG_BT_CONTROLLER_TO_HOST_SPI_IRQ_PIN
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Per ZEP-1958, Phase 2 of adding CC3220sf LaunchXL support,
was to "deprecate the CC3200 launchxl support in Zephyr
(redundant to the CC3220)."
Effectively, the CC3220 SOC replaces the CC3200.
This patch removes the following:
* the imported CC3200 SDK
* CC3200 SOC, board, DTS files.
* adjusts other files where cc3200 was mentioned.
Also, it fixes explicit references to CC3200 in generic
CC32xx driver files.
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Rename the BT_CONTROLLER prefix used in all of the Kconfig variables
related to the Bluetooth controller to BT_CTLR.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The documentation says that the API will automatically append the
net_buf fragment to the end of network packet fragment chain.
This was not the case and current only user for this API in
echo-server sample appended the fragment itself. The fix is to
automatically append the fragment to the end of fragment chain.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The hexiwear_k64 board can drive the leds with a pwm, so update the
rgb_led sample to work with this board.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The hexiwear_k64 board can drive the leds with a pwm, so update the
fade_led sample to work with this board.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The hexiwear_k64 board can drive the leds with a pwm, so update the
blink_led sample to work with this board. Reduces the maximum blinking
frequency from 500 Hz to 64 Hz because your eye can't distinguish these
higher frequencies (the led appears solidly on). Increases the minimum
blinking frequency from 0.5 Hz to 1 Hz because the mcux pwm driver can't
handle frequencies less than 1 Hz.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Following test changes, log info have changes and previous log info
with stack guard present shows an mpu error not caused by a stack
overflow caught by mpu stack guard feature.
Signed-off-by: Michel Jaouen <michel.jaouen@st.com>
This test launches several threads. Only last thread will overflow the
stack and an mpu exception will occur. The other threads are regulary
suspended, this triggers access to kthread structure. This tests is
failed on st and nxp platform, if 32 bytes alignement is not set.
Signed-off-by: Michel Jaouen <michel.jaouen@st.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This commit adds IPSO temperature support to the LwM2M client sample.
NOTE: A dummy value of 25C is set during initialization and does not
change.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This sample utilizes the new LwM2M library by setting up default
values for LwM2M device and firmware objects and then establisting
a connection to a LwM2M server (for example Leshan Demo Server) via
the registration interface.
To use QEMU for this purpose please see:
doc/subsystems/networking/qemu_setup.rst
NOTE: This sample currently does not demonstrate DTLS/bootstrap as
neither of these is supported by the LwM2M library.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
When unicast IPv6 address is added to network interface, it is
possible that the return value is NULL (if all the address slots
are already occupied).
Coverity-CID: 157607
Jira: ZEP-2467
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch adds a configuration file that tests Flash writes with MPU
enabled.
[david.brown: Put options in prj.conf with comments as per review
feedback]
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: David Brown <david.brown@linaro.org>
The parsing of strings with sharp notes (e.g. "100C#") was incorrectly
implemented. Now it should be correct. Additional benefit is that this
should fix Coverity CID 173632.
Jira: ZEP-2467
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The IEEE 802.15.4 settings are applied automatically by
net_app_init() function is is enabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Don't call net configuration explicitly, instead rely on net_app
auto init service.
Thus, the only difference between POSIX and Zephyr versions of these
samples are different include files. The application code is 100%
the same.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The led demo does not even enable Bluetooth by default, and in case a
custom enables it shall use CONFIG_NET_APP_BLUETOOTH_NODE.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The so called Router role don't require the IPSS, nor it should
advertise since it is not the peripheral in this case.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make use of CONFIG_NET_APP_BLUETOOTH_NODE to enable advertising and
registering the necessary services.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sample can be used to test ambient light, RGB and proximity
functionality of APDS9960 sensor in polling mode.
Remove old sample which is not using sensor API.
ZEP-1552
Signed-off-by: Punit Vara <punit.vara@intel.com>
ReST defines interpreted text roles where text enclosed by single quotes
can be "intrepreted", for example :ref:`some name` becomes a link to
a label anywhere in the doc set named "some name", :c:func:`funcname()`
becomes a link to the API documentation for "funcname", and
:option:`CONFIG_NAME` becomes a link to, in our case, the documentation
for the generated Kconfig option.
This patch fixes uses of `some name` (without a role) by either adding
an explicit role, or changing to ``some name``, which indicates inline
code block formatting (most likely what was intended).
This is a precursor to changing the default behavior of interpreted
text to treat `some name` as :any:`some name` (as configured in
doc/conf.py), which would attempt to create a link to any available
definition of "some name".
We may not change this default role behavior, but it becomes an option
after the fixes in this patch. In any case, this patch fixes incorrect
uses of single-quoted text (possibly introduced because GitHub's
markdown language uses single-quoted text for inline code formatting).
Jira: ZEP-2414
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Count of 4 seems to cause deadlocks with some Android phones due to
other GATT activity in addition to Mesh related data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert echo-client to use DTLS for UDP connections if DTLS
is enabled by prj.conf file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Convert echo-server to use DTLS for UDP connections if DTLS
is enabled by prj.conf file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Duplicate CONFIG_SYS_LOG_NET_LEVEL variable was defined in
config files so removing extras.
.config:58:warning: override: reassigning to symbol SYS_LOG_NET_LEVEL
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Couple of network samples had extra startup thread which is not
needed currently. This was an artifact before moving to using
unified kernel.
Jira: ZEP-2236
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Run http_server, http_client and https_client compile tests with
Bluetooth config. For http client tests we only use qemu_x86 as
the qemu_cortex_m3 tests failed because of too little memory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_NET_CONTEXT_NET_PKT_POOL is defined, which is the
default for Bluetooth, then create the pool and use it when
sending network packets. This is needed when trying to send
TCP packets using Bluetooth IPSP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There is plenty of memory for QEMU currently so no need to
manually set the amount of memory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_NET_CONTEXT_NET_PKT_POOL is defined, which is the
default for Bluetooth, then create the pool and use it when
sending network packets. This is needed when trying to send
TCP packets using Bluetooth IPSP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_MQTT_LIB_TLS is introduced to enable TLS support.
Also, prj_frdm_k64f_tls.conf is added to demostrate the whole idea.
jira:ZEP-2261
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Use net app API since we want to enable MQTT with TLS.
mqtt_connect() and mqtt_close() are added to build and close the
connection to the broker. The caller doesn't need to deal with
the net context anymore and the most of network setup code in
mqtt_publisher is removed.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
When an app uses a construct such as:
obj-y = main.o ../../../../samples/bluetooth/gatt/hrs.o
in its makefile, it causes said object module to be built in the
source tree, not in the object tree.
When building massively parallel, this usually resuls on the files
getting corrupted, leading to bugs such as:
https://jira.zephyrproject.org/browse/ZEP-2316https://jira.zephyrproject.org/browse/ZEP-2317
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:3: warning: NUL character seen; rest of line ignored
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:4: warning: NUL character seen; rest of line ignored
src/../../../../samples/bluetooth/gatt/.gap.o.cmd:5: *** missing separator. Stop.
as multiple build are trying to touch the same file in the source tree
and of course, race and causes a build bug.
We have known about this issue for a long time, but it requires
modifications in the build system that there is no time to tackle.
A suggested workaround is to include the source files into a local .c
file, so this is what this patch does, to remove the random noise.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
There's no need for debug logs by default in the mesh sample, and it
just contributes excessively to the ROM footprint.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This PR enables Bluetooth stack if Bluetooth L2 is
compiled in.
Change-Id: I8f8127031140f0603615af44e0809d203db32f48
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Not easily done using RAM/ROM filters, configurations need to be adapted
to make this fit on more devices. Limit the target platforms now while
we figure out configurations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In many networking tests we had to configure SLIP in the prj.conf
leaving those configurations Qemu specific. This change enables SLIP for
QEMU targets automatically and allows reuse of prj.conf for multiple
boards.
Additionally, the TUN options is removed. This option was not used
anywhere.
To enable self-contained networking tests that do not depend on SLIP, we
introduce the new option NET_TEST which disables TAP and allows testing
in QEMU without the need for a host interface.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
kernel APIs have changed to using K_THREAD_STACK_DEFINE to declare stack
memory as well as K_THREAD_STACK_SIZEOF to calculate it's size.
Adjust irc_bot sample to reflect those changes.
This fixes stack related page faults when running irc_bot with
CONFIG_X86_STACK_PROTECTION enabled (which it is by default for qemu).
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This sample includes builtin UDP and TCP echo servers, max
MAX_CONTEXTS=3 as set previously, they just didn't work.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
