Add implementation of HCI_LE_Set_Connectionless_CTE_-
Transmit_Parameters command in HCI.
Add implementation of command handling in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Removed reel_board specific config and dts overlay.
Configurations are moved to reel_board defconfig.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Sets the LPN state to WAIT_UPDATE when waiting for the initial poll
response when disabling LPN_ESTABLISHMENT. Previously, the LPN node
would stay in the wait offer state even after the offer was processed,
which led to it aborting the friend establishment completely if it
failed to receive the first poll.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
While the friend node considers the friendship established as soon as it
sends the friendship offer, the LPN only considers the friendship
established once it receives the first update after its poll. This
update is encrypted with the friendship credentials, which aren't
available, as they're protected by an if (lpn_established()) check.
Changes the check to lpn_waiting_update(), which makes the LPN check its
friendship credentials only when it's expecting a response to a poll
message. This is the only time the friend will send messages encrypted
with the friendship credentials.
This is a regression from #28511.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Explicitly sets the LPN credentials when sending a friend request.
This fixes a regression from #28511.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Do not abort pairing when peer sends a SMP command with an opcode
reserved for future use, as per spec.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add a dummy SMP command handler for keypress notification, that does
nothing (yet). This allows the next commit to work properly.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Update documentation using west enhancements and add sections related to
newer overlays.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add OpenThread overlays. This allows users to evaluate UpdateHub using
Thread Network.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add Bluetooth Low Energy IPSP overlays. This allows users to evaluate
UpdateHub using BLE with IPSP supported by Zephyr.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add IEEE 802.15.4 overlays. This allows users to evaluate UpdateHub
using 6lowPAN.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add MODEM and Arduino header overlays. This allows users to evaluate
UpdateHub using any MODEM supported by Zephyr which supports UDP and
PPP connection.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add WIFI overlay and connection request. This allows users to evaluate
UpdateHub using any WIFI supported by Zephyr which supports UDP.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add support to Network Management in UpdateHub sample. This allows
start application based on network events, independent of the media
type selected by users.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Remove NET_CONFIG_SETTINGS Kconfig option. The net settings should
be enabled from now at project config or at any overlay. This is
necessary to allow better control when application should start.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Current logs only prints default logs level. Add LOG_LEVEL at updatehub
to switch to another variation based on CONFIG_UPDATEHUB_LOG_LEVEL.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Previously, `cmake/app/boilerplate.cmake` evaluated
ZEPHYR_EXTRA_MODULES on line ~548 *after* `zephyr_module.cmake`
was included on line ~168.
This change ensures that modules defined in `ENV{ZEPHYR_EXTRA_MODULES}`
are processed properly through `zephyr_module.cmake`.
Fixes#30673
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
When tickless mode was disable, sys clock timeout handler was calling
public API function for setting new compare value. Public API function
asserts when chan 0 is used which is reserved for system clock.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test for reseting CC timeout. CC is reconfigured just beofre
expiring of the first CC. It is expected that first setting will never
expire.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added clearing of CC event which may occure due to previous
CC value which was closed to current counter value.
Fixed int_mask initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Convert entropy drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There is a GPIO driver for use with arty so enable the GPIO feature in
the board yaml to get some testing of it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes the fxas21002 sensor driver to provide gyro channel data in
radians/sec instead of degrees/sec.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix TIMER0 and RTC0 being selectable when using out-of-tree Bluetooth
controller.
Generalize the Kconfig to have the features that use the HW peripheral
select them as reserved to make the dependencies more manageable.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
These are likely enough defined by mistake to emit a warning for.
Adjust tests to match, tweaking the test_warnings() setup: now that
we've got several test cases, it's a bit cleaner not to have to
copy/paste the ('edtlib', WARNING, ...) part of every expected log
record tuple.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The edtlib strategy for emitting warnings is to print directly to
standard error. This in turn requires hacks to drop stored references
to stderr in various _warn_file attributes so the EDT objects can be
pickled.
In general, I think it's not really appropriate for library modules
like edtlib to be printing to stderr directly. The user should be able
to configure logging for general utility data munging modules like
this as they please, and not just deciding what file to print to.
Move this around so the standard logging module is used instead. We
can preserve backwards compatibility in gen_defines by customizing the
'edtlib' logging module behavior so it prints the exact same thing it
always has.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Whenever a devicetree binding defines a string property whose
enumerated values are all tokenizable, generate C macros for each
property value that are the corresponding tokens.
Note that "token" is distinct from "identifier": both 'foo' and '123'
are valid tokens, but only 'foo' is a valid identifier. We permit some
strings which are not valid identifiers in anticipation that the
generalization may be useful, e.g. when defining macros that paste the
token onto a prefix that makes the whole thing an identifier.
Fixes: #21273
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add enum_tokenizable and enum_upper_tokenizable to PropertySpec. These
allow a PropertySpec to declare that it both has an enumeration of
values and all of them are strings which are "tokenizable". Don't
bother extending Property with these; the user can access the
information through Property.spec now, so the extra delegation is
unnecessary.
See the docstrings for details on what "tokenizable" means. The basic
idea is that we should be able to use the DT binding's enum values as
C 'enum' enumerators in a "reasonable way".
Add val_as_token to Property. This produces a canonical token for the
property value.
Add tests for this feature in particular and property enumerations in
general.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In the 'normal' case of a property whose definition is taken from a
binding YAML file, a fair number (three at present) of the attributes
available on Property objects are directly taken from the
corresponding PropertySpec object.
Refactor the internals of how a Property gets initialized so that it
has a direct reference to its PropertySpec, and make those attributes
properties which just delegate to the PropertySpec (which in turn just
delegate to the binding). Additionally, expose the PropertySpec
directly.
This will make it easier to extend the Property class with additional
attributes that normally come from the PropertySpec without having to
touch all the locations where Property.__init__ is called.
In the case of the 'default' properties, we handle this by dummying
out some PropertySpec objects. These dummy PropertySpecs in turn
require a dummy Binding.
This change has the advantage that it improves the degree to which
these defaults are checked, e.g. it makes sure that 'status' is one of
the permitted values.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Convert gpio drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
DEVICE_DECLARE -> DEVICE_DT_INST_DECLARE
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A dedicated LwM2M execute callback type has been implemented which
supports execute arguments. The lwm2m engine, lwm2m_client sample and
lwm2m objects have been updated accordingly. Also the API change has
been documented, and the lwm2m engine reference has been updated.
Fixes#30551.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
Add the new x86 board to the x86/info test list, and exclude it from
the cmsis_rtos_v2 test (something that seems to be needed for all 64
bit x86 architectures).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
