After introducing persistent storage, it's useful for an app to check
if the node has been provisioned or not.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch introduces several changes to support OPTIONAL resources.
The primary indicator for this behavior is to assign FLAG_OPTIONAL
to the object field's permission flags.
These resources are not setup by the LwM2M object code. They are
left up to the user-based code for initialization via the following
functions:
lwm2m_engine_set_res_data()
lwm2m_engine_get_res_data()
When assigning const-based data as a data buffer, user-based code can
also specify the following data flag: LWM2M_RES_DATA_FLAG_RO
The FLAG_OPTIONAL flag also affects the LwM2M engine in the following
ways:
- CREATE operations won't generate an error if optional resources are
not included.
- Object instance READ operations won't complain about missing
optional resources.
- In the future, BOOTSTRAP operations can have different handling
based on optional resources.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In the future, we will have optional resources that may or may
not be assigned a buffer for data storage. When these resources
are queried we need to be able to return an error code if the
buffer isn't set.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Similar to UDP, some drivers can make use of the following functions:
net_tcp_get_hdr()
net_tcp_set_hdr()
Let's expose them as <net/tcp.h> and change all internal references
to "tcp_internal.h".
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This commit fixes the SecureFault IRQ number for non-CMSIS
compliant ARM Cortex-M MCUs. Erroneous IRQ number was introduced
in ec398e8779.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Deprecated k_call_stacks_analyze() API as it is only
dumping (printing) the statically defined main, idle,
work and ISR stacks.
Use k_thread_foreach() API which is a generic API
to iterate over threads.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add k_thread_foreach API to iterate over all the threads in
the system.
This API can be used for debugging threads in multi threaded
environment to dump and analyze various thread parameters like
priority, state, stack address etc...
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Zephyr supports fatfs, nffs and fcb as storage layer. fatfs and nffs
are less suited for application in memory restricted IC's. fcb has a
smaller footprint but has a complex api.
The proposed module is a module with a even smaller footprint compared
to fcb and a simple interface for reading and writing entries. The
module provides wear levelling of flash. This allows the module to be
used not only to store configuration settings but to store device state
(e.g. state of a light switch over reboots) of a zephyr device.
Fixes buffer overflow by introducing maximum read length in nvs_read()
and nvs_read_hist().
Fixes nvs_write() not to reflash the same data. Allows the user to do
call nvs_write() for all defined entries without worries about flash
wear.
Fixes garbage collection error where wrong data could be copied.
Add nvs_delete() to allow deleting a stored entry. A deleted entry will
not be copied to a new flash sector
Include flash wear information in the README.md documentation
0/25 Update module after reviewers remarks, added documentation to
nvs.h, removed README.md by nvs.rst in doc/subsystems folder
04/26 Update module after reviewers remarks, updated nvs.rst, added more
documentation to samples/subsys/nvs/src/main.c, updated doxygen info
in nvs.h (hope this time it works).
04/26 Update subsystems.rst to include nvs.restart
04/27 Updated nvs.c and nvs.h to avoid a possible flash deletion loop
when the file system is full.
04/29 Updated nvs_write to detect and ignore deletes of non-existing
items
05/06 Update NVS module to return standard error codes, removed low
level API, added configuration options. NVS now uses the board dts to
determine the flash storage location (FLASH_AREA_STORAGE_OFFSET).
05/06 Update nvs.rst. Updated intendation and added intermediate
variables in nvs.c to make the code easier to read.
05/06 Update nvs.rst.
05/07 Update nvs.rst
05/08 Changed the API to a more standard file system API.
05/08 Removed cnt_max from nvs_read() as it is not used.
05/08 Removed #ifdef(CONFIG_NVS_LOG) from nvs_priv.h, now the module can
be build with debugging off.
05/09 Removed configuration options for SECTOR_SIZE, SECTOR_COUNT and
MAX_ELEM_SIZE. It is now easy to support multiple NVS filesystems on
one or multiple devices. Changed logging to support newlib systems.
Thanks to Olivier Martin for reporting and proposed changes.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This ensures the every characteristic has a value attribute declared
with the same UUID since the old macro did not declare the value the
application would normally have to declare one itself using a different
UUID which is not allowed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds BT_GATT_ATTRIBUTE which replaces BT_GATT_DESCRIPTOR as the
most basic way to declare an attribute since using descriptor may be
confusing when declaring things like a characteristic value since the
Bluetooth has their procedures completely separated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
New API enables setting watchdog timeout in the unit of microseconds.
It is possible to configure watchdog timer behavior in CPU sleep state
as well as when it is halted by the debugger.
It supports watchdogs with multiple reload channels.
Jira: ZEP-2564
Signed-off-by: Michał Kruszewski <michal.kruszewski@nordicsemi.no>
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
The sequence number was acting as a stop-gap for missing persistent
storage. Now that we have the settings support in place it's no longer
needed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for storing the heartbeat publication persistently. The
information is only stored as "publish indefinitely" or as "periodic
publishing disabled" since we can't know for how long the node is
powered off. The information is stored under the settings key
bt/mesh/HBPub.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Keeping the model struct same sized, change the element pointer to two
indexes, and add a flags member that will be used to track pending
storage actions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are valid use cases where the model layer must know the true
destination address. So far only the fact that it was one of the
addresses that the model subscribes to (its element's unicast
included) has been knowable.
Solve the issue by moving the destination address from the internal
net_rx context to the public bt_mesh_msg_ctx struct.
Fixes#7453
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are certain use cases where the application needs to be able to
explicitly set a specific identity address. This was previously
possible using the bt_storage API, however now that it's gone another
solution is needed.
This patch adds a ne bt_set_id_addr() API which the application can
use to set a specific identity address before calling bt_enable().
Fixes#7434
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Newlib uses any RAM between _end and the bounds of physical
RAM for the _sbrk() heap. Set up a user-writable region
so that this works properly on x86.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add support for multiple instances of a file system by
making use of mount point as the disk volume name which
is used by the file system library while formatting or
mounting a disk.
Also moved out file system specific data structures from
public fs.h header and handled them in corresponding
file system interface files by introducing open files and
open directories concept which is already being used in
NFFS interface module. Now it is extended to FatFs as well.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add support for enabling multiple disk interfaces (Flash, RAM)
simultaneously in Zephyr by introducing a simple disk interface
framework where we can register multiple disks which would
interface with different storage devices. This would enable us
to have multiple instances of FATFS in Zephyr.
Add support for mass storage drive disk name which will be
used as an argument when calling the disk interface API's.
Enable multiple volumes support configuration in
ELM FAT library.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Extend storage_dev type beyond 'struct device' by changing
the variable type to void pointer. This will be needed if we
have additional transactional layers b/w filesystem and the
actual backend device.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The pinmux subsystem does not have any API documenation. Currently
none of the existing pinmux drivers do any kind of input validation
for the pin/op parameters, which has been shown to allow the caller
to access unauthorized memory, up to and including disabling the
MPU.
This requires a proper specification for the pinmux subsystem and
also modification of existingd drivers to validate arguments on a per
driver basis. Remove user mode access until #7390 is resolved.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a new linker section for a list of submodule settings handlers,
and iterate the list from the various settings callbacks.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The same functionality is now supported by the settings-based
solution, so remove bt_storage out of the way. There were stubs in
bt_storage to handle per-peer information (e.g. pairing keys) but this
was never actually implemented in full. The next step is to add this
support to the settings-based solution.
Leave the code for generating temporary IRK and identity address in
case BT_SETTINGS is not enabled. Also leave the code for using vendor
HCI to read the identity address, in which case the settings
implementation will not touch it.
Introduce a new bt_unpair() API to replace the removed
bt_storage_clear(), since the latter was actually doing more than just
storage management: it was also handling runtime storage of pairing
information. Later, the bt_unpair() implementation will be extended to
clear settings-based pairing storage.
There is one feature that the bt shell module looses: the ability to
give a specific identity address to the "init" command as a parameter.
We might look later in the future if this is really needed, and add a
separate API for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add system call handler support to LED subsystem. No buffers are
involved in any of the API's and hence the syscall support is
straightforward.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add functions that will return correct source IPv4 address
according to given destination address. This is done similar
way as for IPv6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 'valid' member of struct bt_gatt_ccc_cfg was redundant, since
setting 'peer' to BT_ADDR_LE_ANY does the same job. What's worse, the
handling of 'valid' was also buggy in that some places looking for
valid CCC structs only matched the address, meaning it might yield a
positive match for invalid entries.
Fix these issues by removing the 'valid' struct member, and solely
using the 'peer' member to identify valid entries. Also simplify the
code by acknowledging that no CCC entry is essentially the same as the
value '0' written to CCC.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This was wrong in two ways, one subtle and one awful.
The subtle problem was that the IRQ lock isn't actually globally
recursive, it gets reset when you context switch (i.e. a _Swap()
implicitly releases and reacquires it). So the recursive count I was
keeping needs to be per-thread or else we risk deadlock any time we
swap away from a thread holding the lock.
And because part of my brain apparently knew this, there was an
"optimization" in the code that tested the current count vs. zero
outside the lock, on the argument that if it was non-zero we must
already hold the lock. Which would be true of a per-thread counter,
but NOT a global one: the other CPU may be holding that lock, and this
test will tell you *you* do. The upshot is that a recursive
irq_lock() would almost always SUCCEED INCORRECTLY when there was lock
contention. That this didn't break more things is amazing to me.
The rework is actually simpler than the original, thankfully. Though
there are some further subtleties:
* The lock state implied by irq_lock() allows the lock to be
implicitly released on context switch (i.e. you can _Swap() with the
lock held at a recursion level higher than 1, which needs to allow
other processes to run). So return paths into threads from _Swap()
and interrupt/exception exit need to check and restore the global
lock state, spinning as needed.
* The idle loop design specifies a k_cpu_idle() function that is on
common architectures expected to enable interrupts (for obvious
reasons), but there is no place to put non-arch code to wire it into
the global lock accounting. So on SMP, even CPU0 needs to use the
"dumb" spinning idle loop.
Finally this patch contains a simple bugfix too, found by inspection:
the interrupt return code used when CONFIG_SWITCH is enabled wasn't
correctly setting the active flag on the threads, opening up the
potential for a race that might result in a thread being scheduled on
two CPUs simultaneously.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The #ifdef protections are not needed, and in fact prevent helpers
such as IS_ENABLED() from being used when calling APIs which are
optional.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Modify the linker script with the command INSERT.
It instructs the linker to augment the default linker script
SECTIONS with the ones provided with the one provided in
this script.
It also modified the meaning of the -T switch, so it no longer
replaces the default linker script
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
According to IEEE 802.1Q the VLAN priority (PCP) is not directly mapped
to the network packet priority. The Best Effort priority has a PCP value
of 0. The lowest priority (Background) has a PCP value of 1.
All the values are mapped according to the following table:
+-----+-----+---------+
| PCP | PRI | Acronym |
+-----+-----+---------+
| 1 | 0 | BK |
| 0 | 1 | BE |
| 2 | 2 | EE |
| 3 | 3 | CA |
| 4 | 4 | VI |
| 5 | 5 | VO |
| 6 | 6 | IC |
| 7 | 7 | NC |
+-----+-----+---------+
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Implements the driver for Intel CAVS I2S. Only Playback
is currently supported.
Change-Id: I7b816f9736dc35e79a81d3664d6405dc0aac15b4
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patchset provides Xtensa's xcc compiler support for Xtensa
projects in Cmake. This requires the below environment variables
to be defined aptly. The appropriate xcc license information also
need to be supplied.
ZEPHYR_GCC_VARIANT=xcc
TOOLCHAIN_VER=RF-2015.3-linux
XTENSA_CORE=cavs21_LX6HiFi3_RF3_WB16
XTENSA_SYSTEM=/opt/xtensa/XtDevTools/install/tools/
RF-2015.3-linux/XtensaTools/config/
XTENSA_BUILD_PATHS=/opt/xtensa/XtDevTools/install/builds/
Change-Id: Ib3c10e8095439b0e32276ff37c00eca8420773ec
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
intel_s1000 has multiple levels of interrupts consisting of core, CAVS
Logic and designware interrupt controller. This patchset modifies
the regular gen_isr mechanism to support these multiple levels.
Change-Id: I0450666d4e601dfbc8cadc9c9d8100afb61a214c
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
CAVS interrupt logic is an intel IP that combines several sources of
interrupt into one line that is then routed to the parent controller.
CAVS stands for "connected Audio, Voice and Speech". This IP supports
4 lines which can have a max of 32 interrupts each.
Change-Id: Ia6be51428bedf1011d148ae1fc5d4c34252c05da
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
intel_s1000 uses DesignWare IP for UART. National Semiconductor
16550 (UART) component specification is followed in this IP.
Change-Id: Ied7df1dc178d55b6dbe71d729d6383ba07274ea4
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This trades a little bit over 40 bytes (on x86) of text for a lot of
savings in rodata. This is accomplished by using bitfields to pack the
field name length, offset, alignment, and the type tag into a single
32-bit unsigned integer instead of scattering this information into
four different integers.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
BUILD_ASSERT() macro makes use of __COUNTER__ which may not be
supported in some compilers (like xcc). So, multiple uses of
BUILD_ASSERT() in same scope is not possible for such compilers.
Instead, the expression to BUILD_ASSERT can be "&&"ed to achieve
the same purpose.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Singly-linked lists work in a specific way, but this will allow
slist semantics to be defined for any data structure that can store
a "next" pointer in any way at all, possibly something not even
a pointer value, but a table index.
The immediate need for this patch is to allow the easy definition
of an slist variant which stores flags in the low-order bits of the
node pointer.
The compiler does not need them, but the function prototypes have
been left in slist.h to make the header easier to understand by
the end user and not confuse Doxygen.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add support for LED APIs for controlling the LED devices. This
API can be used by the LED devices present on the chip and connected
externally via buses like I2C, SPI etc...
Following APIs are currently supported:
1. led_blink
2. led_set_brightness
3. led_on
4. led_off
Driver support using these APIs will be added in subsequent patches.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The http.h used HTTP server defines when compiling HTTP client.
This causes compilation error.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When MMU is enabled and the SOC we are running doesn't have
execute in-place(XIP) the final image will be a monolith which
sits in RAM. In such situations we need to maintain the alignment
for application memory. If not maintained the MMU boot tables
will not be configured properly.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Driver APIs might not implement all operations, making it possible for
a user thread to get the kernel to execute a function at 0x00000000.
Perform runtime checks in all the driver handlers, checking if they're
capable of performing the requested operation.
Fixes#6907.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
API settings_subsys_init call was changed so that it returns
error (so returns int instead of void).
Prototype of storage helper function export_func for
settings_handler::h_export was changed so that it returns error
(so returns int instead of void).
Fixed few other error handling issues by ignoring return
values.
Tests were aligned to above patches.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
