Although the documentation states that only work items that have not
completed the delay can be cancelled, in fact pending items can also
be removed from a work queue. Document that behavior
Also document the specific return value that will be obtained based on
the state of the work item at the time cancellation was attempted
using the current implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The delayed work work_q pointer is set on submission, and remains set
even after the work item completes. Attempts to re-submit the
completed work item to a different queue will be rejected because the
code cannot distinguish a completed item from one that is still
waiting for a delay or to be processed.
Document this restriction.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Make more clear that submitting a work item to one queue while it is
pending on another queue has no effect.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This patch adds Secure Channel capabilities to osdp Control Panel and
Peripheral Device modes.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Modified net_ipv4_is_addr_mcast() to not wrongly classify an IPv4
broadcast address as a multicast address.
Signed-off-by: Oliver Hitz <oliver@net-track.ch>
Adding dictionary commands concept. It simplifies creation of multiple
commands that are handled by a one function handler.
This is a special kind of static commands. Dictionary commands can be
used every time you want to use a pair: (string <-> corresponding data)
in a command handler. The string is usually a verbal description
of a given data. The idea is to use the string as a command syntax that
can be prompted by the shell and corresponding data can be used to
process the command.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The logging subsytsem had if else if constructs without final
else statement. This commit adds else {} to comply with
coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The following defines have been deprecated for at least 2 releases so
remove them:
UART_ERROR_BREAK
LINE_CTRL_BAUD_RATE
LINE_CTRL_RTS
LINE_CTRL_DTR
LINE_CTRL_DCD
LINE_CTRL_DSR
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Simple change that makes fs_seek and fs_tell return -ENOTSUP when
file system does not implement the seek/tell.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
So far there was a simple char array used as buffer, with additional
variable representing number of bytes already written into it. After
full frame was written, a boolean flag was simply set to notify thread
about being ready to be processed. There was however no mechanism
implemented to prevent new incoming bytes from overwriting such buffer
before (or during) being processed.
Use net_buf to store temporary frame. Define dedicated net_buf_pool,
from which such buffer will be allocated and freed after being
processed. This will prevent from reusing the same buffer before having
it fully processed (and returning once again to available buffer pool)
in shell thread.
Define also fifo that will store buffers that are ready to be
processed. This will be the mechanism for notifying thread about new
UART SMP fragments.
net_buf pool and k_fifo are used on purpose, keeping in mind their
additional overhead (mostly in RAM/ROM usage). This makes the code ready
for increasing number of buffers if needed. In this commit however we
stick with only 1 buffer, to keep minimal changes in processing flow.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This is not intended to be public, all users are expected
to be using the opaque k_spinlock_key_t.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Remove SYS_RING_BUF_DECLARE_POW2 and SYS_RING_BUF_DECLARE_SIZE as they
have been marked deprecated for at least 2 releases.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The __attribute__((optimize("-O0"))) attribute is used to disable
optimization of some test functions. ARC MWDT toolchain doesn't
support it, however it supports __attribute__((optnone)) with
similar functionality.
Define __no_optimization attribute across all toolchains so it
can be used in tests.
NOTE: we don't define __no_optimization for XCC as it includes
GCC header with __no_optimization defined.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Instead of having some special stack frame when first scheduling new
thread and a new thread entry wrapper to pull out the needed data, we
can reuse the context restore code by adapting the initial stack frame.
This reduces the lines of code and simplify the code at the expense of a
slightly bigger initial stack frame.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The message type flag will be set to
0x11(WEBSOCKET_FLAG_FINAL(0x01) | WEBSOCKET_FLAG_PING(0x10)) when
receiv PING with final fragment, it conficts with
WEBSOCKET_FLAG_PONG(0x11)
The WEBSOCKET_FLAG_PONG should be 0x20
Signed-off-by: Jackie Ja <qazq.jackie@gmail.com>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
k_queue uses a sflist.
The macro used for initialising the list is the slist not sflist macro.
This commit just changes the macro to use the sflist init macro.
Fixes#28912
Signed-off-by: Toby Firth <tobyjfirth@gmail.com>
Add an emulation controller which routes SPI traffic to an attached
emulator. Only one emulator is supported per bus at present, since
chip-selction functionality is not present.
This allows drivers for SPI peripherals to be tested on systems that
don't have that peripheral attached, with the emulator handling the SPI
traffic.
Signed-off-by: Simon Glass <sjg@chromium.org>
In case a "required: False" enum binding doesn't mention a
default value, but a default value makes sense to be set in the code,
DT_ENUM_IDX_OR could be used to provide the default idx to be used.
New macro comes with appropriate tests.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Change a runtime log check such that Coverity does not report a
needless issue on every use of any log macro.
Before the change, this was used in log macros:
else if(is_user_context || (_level <= LOG_RUNTIME_FILTER(_filter)))
If runtime filtering is not enabled, this expands to:
else if(is_user_context || 1)
Because the level is compared to log level debug (4) and will always be,
equal or lower.
Coverity always reports this as a potential issue, since the
variable part (is_user_context) makes no difference.
After the change, a macro is used which expands into the original code
when runtime filtering is used, else it simply expands to:
else if(true)
Which has equal semantics as the previous code but isn't flagged by
Coverity.
Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no>
Remove old K_ prefixed macros defined in kernel.h as well as the
following APIs:
k_uptime_delta_32
k_enable_sys_clock_always_on
k_disable_sys_clock_always_on
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Removed the following macros as they have been marked deprecated for at
least 2 releases:
__ticks_to_ms()
__ticks_to_us()
z_us_to_ticks()
sys_clock_hw_cycles_per_tick()
SYS_CLOCK_HW_CYCLES_TO_NS64()
SYS_CLOCK_HW_CYCLES_TO_NS()
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Application would need this information in order to know when
it is able to create sockets with proper IPv4 address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "tc" field which was holding the traffic class thread
priority is not used nor needed so remove it from the struct
to save some space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Changes the callbacks for periodic sync callbacks such that multiple
applications can register callbacks, similar to the connection and
scan callbacks.
This change will make it easier to support the PAST feature, as
PA syncs make be created by the controller which then notifies
the host, and thus the application (if callback registered).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
BT_HCI_ERR and BT_SECURITY_ERR both define success constants which can
be used to check the results and make the intended value domain clear.
Add the same for ATT error values.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Since the size of an enum can be undefined in certain compilations
environments, remove the BUILD_ASSERT that verifies that the enum is
16 bits.
Signed-off-by: Jett Rink <jettrink@google.com>
In npcx7 series, all of them support the Intel Enhanced Serial
Peripheral Interface (eSPI) Revision 1.0. This specification provides a
path for migrating host sub-devices via LPC to a lower pin count, higher
bandwidth bus. In addition to Host communication via the peripheral
channel, it provides virtual wires support, out-of-band communication,
and device mastering option over the Chipset SPI flash.
Becisdes introducing eSPI device in npcx7, this CL also includes:
1. Add eSPI device tree declarations.
2. Add npcx7-espi-vws-map.dtsi to present the relationship between eSPI
Virtual-Wire signals, eSPI registers, and wake-up input sources.
3. Zephyr eSPI api implementation.
4, Add OOB (Out of Band tunneled SMBus) support.
5. Add configuration files for eSPI test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
MWDT toolchain has Stackcheck_alloca option enabled by default.
So it adds stack checking in addition to Zephyr's stack checking.
As it is completely redundant let's drop it.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Previously MPU registers macros are only defined within its own header
files and could not be used by other part of program. This commit unify
them together.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
The documentation of the callback implies it is invoked from a thread,
but the documentation of the stop function states it can be called
from interrupt context.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
API that takes k_timer structures but doesn't change data in them is
updated to const-qualify the underlying object, allowing information
to be retrieved from contexts where the containing object is
immutable.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
API that takes _timeout structures but doesn't change data in them is
updated to const-qualify the underlying object, allowing information
to be retrieved from contexts where the containing object is
immutable.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Both operands of an operator in the arithmetic conversions
performed shall have the same essential type category.
Changes are related to converting the integer constants to the
unsigned integer constants
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
No need to mix super short version of names with other structures
having full name. Let's follow a more relevant naming where each and
every attribute name is self-documenting then. (such as s/id/apic_id
etc...)
Also make CONFIG_ACPI usable through IS_ENABLED by enclosing exposed
functions with ifdef CONFIG_ACPI.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The generic kernel API did not specify the effect of the call on the
interrupt lockout state. The implementation forwards to
arch_cpu_atomic_idle() which does document that the state is restored
to the state specified in the passed key, which makes it have the
effect of invoking irq_unlock(key).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
On stm32f1 series, in output mode, there is no way to enable
pull-up/down resistors.
Clean these settings from helper defines.
Additionally add helper define to shorten few lines.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Macro STM32_PINMUX and related definitions are not compatible with
stm32f1 series and then should not be provided in -common.h.
Move them to stm32-pinctrl.h
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
- x0/x1 register printing is reversed
- The error stack frame struct (z_arch_esf_t) had the SPSR and ELR in
the wrong position, inconsistent with the order these regs are pushed
to the stack in z_arm64_svc. This caused all register printing to be
skewed by two.
- Verified by writing known values (abcd0000 -> abcd000f) to x0 - x15
and then forcing a data abort.
Signed-off-by: Luke Starrett <luke.starrett@gmail.com>
We need the same logic for each SOC, instead of copypasting
things just put this in a common file. This approach still
leaves the door open for custom memory layouts if desired.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is data and needs the implicit ALIGN_WITH_INPUT that
is provided with SECTION_DATA_PROLOGUE. Otherwise misalignment
may occur if XIP is turned on.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_thread_create() works as expected on both uninitialized memory,
or threads that have completely exited.
However, horrible and difficult to comprehend things can happen if a
thread object is already being used by the kernel and
k_thread_create() is called on it.
Historically this has been a problem with test cases trying to be
parsimonious with thread objects and not properly cleaning up
after themselves. Add an assertion for this which should catch
both the illegal creation of a thread already active, or threads
racing to create the same thread object.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes races where threads on another CPU are joining the
exiting thread, since it could still be running when
the joiners wake up on a different CPU.
Fixes problems where the thread object is still being
used by the kernel when the fn_abort() function is called,
preventing the thread object from being recycled or
freed back to a slab pool.
Fixes a race where a thread is aborted from one CPU while
it self-aborts on another CPU, that was currently worked
around with a busy-wait.
Precedent for doing this comes from FreeRTOS, which also
performs final thread cleanup in the idle thread.
Some logic in z_thread_single_abort() rearranged such that
when we release sched_spinlock, the thread object pointer
is never dereferenced by the kernel again; join waiters
or fn_abort() logic may free it immediately.
An assertion added to z_thread_single_abort() to ensure
it never gets called with thread == _current outside of an ISR.
Some logic has been added to ensure z_thread_single_abort()
tasks don't run more than once.
Fixes: #26486
Related to: #23063#23062
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add information about the network management events when user
wants to listen multiple events from different layers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since the info parameter is only read from and never written the const
in the function parameter should be present.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Move pixel format setting (RGB565/RGB888) to DeviceTree. Add support for
changing pixel format at runtime.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Adds imx rt support.
Allows n-number of can interfaces based on device-tree.
Adds a "common" irq name.
Added CAN bus pins and dts for 1060 and 1064 EVK.
Signed-off-by: Rick Talbott <rtalbott@fastmail.com>
Amend Doxygen documentation for k_msgq_put to note that the message
content will not be modified as a result of the function call and
constify data parameter in function prototype.
Fixes#22301
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Instead of hardcoding the priority1 and priority2 values used
in BMCA, let the user tweak the values via Kconfig.
Fixes#28151
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The function will check that the net_pkt will contain some
data and return true in that case, and false if the net_pkt
is empty.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Channel that requires segmentation must set alloc_buf in order for the
stack to be able to reassemble segments of an SDU.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_UUID_ES_TRIGGER_SETTING was incorrectly using
BT_UUID_ES_MEASUREMENT_VAL as value instead of
BT_UUID_ES_TRIGGER_SETTING_VAL.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This uses the new macros so the common kernel objects can be
garbage collected if they are not referred directly anywhere
in the code. This is useful for reducing library data size
as not all library functions and their corresponding kobjects
are being used.
Fixes#20663
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The iterable section macros Z_ITERABLE_SECTION_ROM()/_RAM() uses
Z_LINK_ITERABLE() which does KEEP() on all symbols. This results
in all symbols under those sections being kept in final image
even though these symbols are not referred directly from the code.
This adds the new set of macros which does not force KEEP() on
the symbols, and allows symbols to be garbage collected.
The existing macros are kept as-is so as not to change their
behaviors.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As discussed in #22668, there is additional risk ascociated with
splitting linker files, as one may update one script and not be
aware of the other. Especially related to updating GNU ld, and
not mwdt could break code for mwdt unnoticed, as mwdt is not
part of CI.
Let's create a single entry point for linker template.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Align multiline string definition syntax in ASSERT in linker
script. This allows to use linker script with ASSERT provided
by linker (i.e GNU toolchain) or dummy ASSERT defined as
preprocessor macros (ARC MWDT toolchain).
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Added a note in documentation for k_mem_slab_alloc(),
k_mem_pool_alloc() and k_heap_alloc() are safe
to call in an interrupt with the timeout K_NO_WAIT.
Fixes: #28020
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
The bluetooth.h header file uses a different tabulation style in the
documentation headers, which for recent Doxygen versions generates
verbatim blocks. This disables usage of the @option ALIAS because
verbatim blocks cannot be nested. With this commit the documentation's
tabulation is fixed and `@option` is used to resolve Kconfig options.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
This updates Kconfig options in the Doxygen documentation to use the new
@option ALIAS. There are three categories of fixes:
* Use of `:option:` inside Doxygen headers, which is not valid (this is
rST syntax!).
* Kconfig options that were just written as plain text and were no
references were generated.
* Use of `@rst` blocks where the only reason for using them was to have
Kconfig options resolved.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
The fix to handle long duration timeouts in 150e18de6e also
changed the duration value from signed to unsigned. This can cause
delays in processing alarms when timer handlers run longer than a tick
(either due to delays or if there are many of them). Revert to a
signed representation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The non-secure callable functions' section is only applicable
to Cortex-M with TrustZone-M extension. Remove it from AARCH64
linker script. (CONFIG_ARM_FIRMWARE_HAS_SECURE_ENTRY_FUNCTIONS
is only enabled for Cortex-M so this is a no-op, but still, it
is a useful cleanup.)
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added configuration for approach to starting system clock source.
There are 3 options: no wait, wait untill available, wait until
stable.
Added support for those modes in clock control driver which handles
low frequency source clock.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The default value of clean_session flag was made configurable in
commit 0fd16f8b78 but the docstring was
not updated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Telling that all the driver supports unaligned writes was and
is not true. Drivers only have to support any source buffer.
This fix message introduced by #23628
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This code had one purpose only, feed timing information into a test and
was not used by anything else. The custom trace points unfortunatly were
not accurate and this test was delivering informatin that conflicted
with other tests we have due to placement of such trace points in the
architecture and kernel code.
For such measurements we are planning to use the tracing functionality
in a special mode that would be used for metrics without polluting the
architecture and kernel code with additional tracing and timing code.
Furthermore, much of the assembly code used had issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add timing functions and APIs. This is now used with some of the tests
we have for performance and metrics and will be used whereever timing
informations are needed, for example for tracing, profiling and other
operations where timing info is critical.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
According to Intel 64 and IA-32 Architectures Software
Developer’s Manual, volume 3, chapter 8.2.5, LFENCE provides
a more efficient method of controlling memory ordering than
the CPUID instruction. So use LFENCE here, as all 64-bit
CPUs have LFENCE.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Do not force linker to place text sections after each other
to have more freedom to optimize.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Create include/toolchain/mwdt.h to handle difference in
several macros for MWDT and ARC GNU toolchains.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
MWDT toolchain adds additional suffix to sections name in case of
ffunction-sections / fdata-sections are enabled.
As proposed by Andy Ross let's pick a single set of rules
and syntax that work.
Suggested-by: Andy Ross <andy@plausible.org>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
ARC MWDT assembler has slightly different directives names:
.pushsect instead of .pushsection
.popsect instead of .popsection
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Add linker script template for MWDT toolchain (linker-mwdt.ld)
Move linker.ld to linker-gnu.ld (without changes)
The "linker.ld" is wraper now.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Make the assembly codes compatible with both GNU
and Metaware toolchain.
* replace ".balign" with ".align"
".align" assembler directive is supposed by all
ARC toolchains and it is implemented in a same
way across ARC toolchains.
* replace "mov_s __certain_reg" with "mov __certain_reg"
Even though GCC encodes those mnemonics and even real
HW executes them according to PRM these are restricted
ones for mov_s and CCAC rightfully refuses to accept
such mnemonics. So for compatibility and clarity sake
we switch to 32-bit mov instruction which allows use
of all those instructions.
* Add "%%" prefix while accessing registers from inline
ASM as it is required by MWDT.
* Drop "@" prefix while accessing symbols (defined in C
code) from ASM code as it is required by MWDT.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
/#
Replace ASM sys_io implementation with identical C code for ARC.
This significantly improves portability, i.e. compiler decides
which instructions to use for a particular CPU and / or
configuration.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
GNU toolchain and MWDT (Metware) toolchain have different style
for accessing arguments in assembly macro. Implement the
preprocessor macro to handle the difference.
Make all ASM macros in swap_macros.h compatible for both ARC
toolchains.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Switch to the _arch_switch() API that is required for an SMP-aware
scheduler instead of using the old arch_swap mechanism.
SMP is not supported yet but this is a necessary step in that direction.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This introduces bt_gatt_attr_get_handle which can be used to resolve
handles of static attributes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
fallthrough attribute was introduced in gcc 7. For older versions the
macro is empty to avoid the follow warnning:
~/zephyrproject/zephyr/lib/os/printk.c:268:5: warning: empty declaration
__fallthrough;
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a generic host command handler framework that allows users to
declare new host command handlers with the HOST_COMMAND_HANDLER macro
at build time. The framework will handle incoming messages from the
host command peripheral device and forwards the incoming data to the
appropriate host command handler, which is looked up by id.
The framework will also send the response from the handler back to the
host command peripheral device. The device handles sending the data on
the physical bus.
This type of host command communication is typically done on an embedded
controller for a notebook or computer. The host would be the main
application processor (aka AP, CPU, SoC).
Signed-off-by: Jett Rink <jettrink@google.com>
The host command peripheral device API abstracts how an embedded
controller sends and receives data from a host on a bus. Each bus like
eSPI, SPI, or I2C would implement their own host command peripheral
device. Each hardware device would then handle the necessary hardware
access to send and receive data over that bus.
The chosen host command peripheral device will be used by the host
command handler framework to send and receive host data correctly.
Signed-off-by: Jett Rink <jettrink@google.com>
Added macro that helps to declare multi-instance services. The macro
allows to statically define service structure array. Each element of
the array is linked to the service attribute array that is provided
by the user.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Allow the application to add subscription without resubscribing.
This is needed for persistent bonds that can go to deep sleep and
turn of the RAM or power-cycle.
In this case the application as a GATT client must have a way to add
the subscription callbacks back to the stack before the GATT server
sends notifications.
This should preferable be able to be done before even connecting
since the notifications can arrive immediately after connecting to
the peer.
The stack cannot persist this on it's own since it must remember the
function pointers for the callback functions. Storing these in
persistent storage would not be compatible with a Device Firmware
Upgrade (DFU) solution.
Fixes: #21798
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Clarify the note about the lifetime of the subscribe parameters.
The note uses subscribe procedure lifetime, but the parameters
must remain valid after having subscribed as well, until the
subscription is removed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add handling of the HCI_Hardware_Error event to log the hardware code.
This event was unmasked in set_event_mask.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Some of what's supposed to be in <time.h> was lost because this header
attempts to define everything using more primitive include files.
Instead incorporate the contents from the toolchain-provided header.
Any gaps should be picked up by the legacy content present in this
file, which should not conflict with the toolchain header.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit extends USB hid API callbacks by adding
'const struct device *dev' parameter. If the application
configured more than one HID device then it must specify
separate hid_ops for each device as its unable to determine
for which device the callback was called.
This patch makes it possible to have only one hid_ops within
the application and the application is aware for which device
the callback was called because of explicit device pointer.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Those APIs are used for deleting appkey, unbinding an application
from SIG model, unbinding an application from vendor model on the
target node, with matching shell command.
Signed-off-by: YanBiao Hao <haoyanbiao@126.com>
Some of the names used in `struct osdp_cmd` where directly as in the
specification. Initially it appealed to keep them like that but with
time, a little more consistent naming of members helps if you haven't
read the specification document very recently.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Following the PD mode implementation (9a91b4ad), this patch adds support
for CP mode of operation in OSDP.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
The smp_shell_rx_byte has been renamed to smp_shell_rx_bytes and now
accepts data buffer pointer and its size as parameters. Return value
has been changed to size_t and represents number of bytes processed from
the given buffer.
The change has been done to more efficiently serve most common scenario
when the function is called in loop to process buffer, byte by byte.
Previously such operation required passing each byte separately,
with the change the function will work directly on source buffer
reducing number of calls and byte copy operations.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Zephyr allows an application to register additional file systems,
which may have maximum filename lengths different from the in-tree
FatFs and littlefs options. Provide a Kconfig variable that allows
the default inference to be overridden.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The documentation claims that Zephyr supports external file system
implementations, and there's no reason not to do so. Rework the API
to allow this.
Note that the file system type cannot legally be an enum anymore,
since we need to support file system types that don't have an
identifier assigned in that enum. Rely on the implicit conversion of
enum values to int to preserve backwards compatibility.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Memory mapping, for now, will be a private kernel API
and is not intended to be application-facing at this time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We no longer plan to support a split address space with
the kernel in high memory and per-process address spaces.
Because of this, we can simplify some things. System RAM
is now always identity mapped at boot.
We no longer require any virtual-to-physical translation
for page tables, and can remove the dual-mapping logic
from the page table generation script since we won't need
to transition the instruction point off of physical
addresses.
CONFIG_KERNEL_VM_BASE and CONFIG_KERNEL_VM_LIMIT
have been removed. The kernel's address space always
starts at CONFIG_SRAM_BASE_ADDRESS, of a fixed size
specified by CONFIG_KERNEL_VM_SIZE.
Driver MMIOs and other uses of k_mem_map() are still
virtually mapped, and the later introduction of demand
paging will result in only a subset of system RAM being
a fixed identity mapping instead of all of it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Flash memory can be write but there is no way to check flash integrity.
Add flash_img_check method that verify flash integrity. This is useful
to avoid firmware reboot and test. Another use is ensure that firmware
upgrade routines from internet server to flash slot are performing
properly. This uses flash_area_check_int_sha256 method to check a
SHA-256 hash. On sucess match, zero is returned, otherwise a negative
errno value.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add SHA-256 flash integrity method. It reads flash data from a
device giving an offset creating a SHA-256 hash to be compared
with a reference. On sucess match, zero is returned, otherwise
a negative errno value.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Separate TLS sockets implementation from net_context layer. Instead of
calling net_context functions directly, create an underlying TCP/UDP
socket, and call socket functions on it instead. This results in a
simpler design, where we don't need to duplicate specific parts of code
from the native socket implementation. Additionally, this allows to use
a different TCP/UDP stack underneath (i. e. when sockets offloading is
used).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It implements gdb remote protocol to talk with a host gdb during the
debug session. The implementation is divided in three layers:
1 - The top layer that is responsible for the gdb remote protocol.
2 - An architecture specific layer responsible to write/read registers,
set breakpoints, handle exceptions, ...
3 - A transport layer to be used to communicate with the host
The communication with GDB in the host is synchronous and the systems
stops execution waiting for instructions and return its execution after
a "continue" or "step" command. The protocol has an exception that is
when the host sends a packet to cause an interruption, usually triggered
by a Ctrl-C. This implementation ignores this instruction though.
This initial work supports only X86 using uart as backend.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This reverts commit b51eeb03f4.
The linker script is now putting read-only material in writable
segments, which causes glib with -D_FORTIFY_SOURCE=2 to abort.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
we modify the ARM Cortex-M only API for managing the
security target state of the NVIC IRQs. We remove the
internal ASSERT checking allowing to call the API for
non-implemented NVIC IRQ lines. However we still give the
option to the user to check the success of the IRQ target
state setting operation by allowing the API function to
return the resulting target state.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
These are all the case that coccinelle cannot find as they are inside
macro declarations.
Fixed via:
git grep -rlz -E "\(struct device \*" |
xargs -0 sed -i 's/(struct device/(const struct device/g'
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All ISRs are meant to take a const struct device pointer, but to
simplify the change let's just move the parameter to constant and that
should be fine.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All ISRs are meant to take a const struct device pointer, but to
simplify the change let's just move the parameter to constant and that
should be fine.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The k_object API associates mutable state structures with known kernel
objects to support userspace. The kernel objects themselves are not
modified by the API, and in some cases (e.g. device structures) may be
const-qualified. Update the API so that pointers to these const
kernel objects can be passed without casting away the const qualifier.
Fixes#27399
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
In order to make all device instances constant, driver_api pointer is
not set to NULL anymore if initialization failed.
Instead, have a bitfield dedicated to it.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's set the api at built time, or this will create a bug once device
instance pointers become constant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add an emulation controller which routes I2C traffic to attached
emulators depending on the I2C address selected. This allows drivers
for I2C peripherals to be tested on systems that don't have that
peripheral attached, with the emulator handling the I2C traffic.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Create a header file and implementation for emulators. Set up a linker
list so that emulators can be found and initialised at start-up.
Emulators are used to emulate hardware devices, to support testing of
various subsystems. For example, it is possible to write an emulator
for an I2C compass such that it appears on the I2C bus and can be used
just like a real hardware device.
Emulators often implement special features for testing. For example a
compass may support returning bogus data if the I2C bus speed is too
high, or may return invalid measurements if calibration has not yet
been completed. This allows for testing that high-level code can
handle these situations correctly. Test coverage can therefore
approach 100% if all failure conditions are emulated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Simon Glass <sjg@chromium.org>
Following are the changes to variable names that are matching
with tag names (Rule 5.7 violations)
In kernel.h, event_type is matching with a tag name in
lib/os/onoff.c. Added a _ prefix to event_type and
also to the macro argument names.
In userspace.c, *dyn_obj is matching with the tag name
dyn_obj in the file itslef. Changed it to dyn
In device.h, device_mmio.h, init.h and init.c,
changed the *device to dev. Except for one change in
init.h
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Adds a Config Client API for deleting netkeys on the target node, with
matching shell command.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
There is no need in custom, partially ASM bitops implementation
for ARC, we can use generic one.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
aarch64 has bitops implementation fully identical to generic one.
So drop redundant code.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
aarch32/cortex_a_r has bitops implementation fully
identical to generic one. So drop redundant code.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
As of today 'include/arch/common/sys_io.h" has generic implementation
for MMIO accessors and memory bits manipulation functions. That leads
to several architectures like ARC, ARM/aarch64, ARM/aarch32/corter_a_r
redefine entire 'common/sys_io.h' even if they only have different
MMIO accessors implementation.
So split 'include/arch/common/sys_io.h" to
* sys_io.h - generic MMIO accessors
* sys_bitops.h - generic memory bits manipulation functions
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Added a callback that lets an application get write error
(if any) when subscribing to a gatt characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Remove paragraph in documentation of GATT write callback which is
clearly wrong and was meant for the read callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Removed all nrf_power/USB related stuff from clock control
driver to USB driver.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The driver utilizes the CONFIG_NET_OFFLOAD setting to avoid the
normal handling of IP packets, and instead uses a socket-like
UART interface to handle incoming and outgoing data via AT commands.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
To debug hard-to-reproduce faults/panics, it's helpful to get the full
register state at the time a fault occurred. This enables recovering
full backtraces and the state of local variables at the time of a
crash.
This PR introduces a new Kconfig option, CONFIG_EXTRA_EXCEPTION_INFO,
to facilitate this use case. The option enables the capturing of the
callee-saved register state (r4-r11 & exc_return) during a fault. The
info is forwarded to `k_sys_fatal_error_handler` in the z_arch_esf_t
parameter. From there, the data can be saved for post-mortem analysis.
To test the functionality a new unit test was added to
tests/arch/arm_interrupt which verifies the register contents passed
in the argument match the state leading up to a crash.
Signed-off-by: Chris Coleman <chris@memfault.com>
This patch adds support for the Texas Instruments LP5030 and LP5036
I2C LED controllers. They are respectively providing up to 30 and 36
channels (i.e. 10 or 12 RGB LEDs).
In addition to the channel/color registers this LED controller provides
a per-LED brigthness register. This driver implements both LED-based and
channel-based API methods:
- led_on
- led_off
- led_get_info
- led_set_brightness
- led_set_color
- led_set_channel
- led_write_channels
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Some LED controllers are connected to a large number of LEDs (i.e.
array/strip of LEDs). A user may need to set several LEDs at the same
time. The LED oriented syscalls are not adapted to this task. Indeed a
call per LED is needed to configure a group of LEDs. To that end, this
patch adds the led_set_channel and led_write_channels syscalls to the
LED API. They offer direct access to the raw channels. They respectively
allow to set a single channel and to write several contiguous channels
(and therefore to configure a group of LEDs).
Moreover the addition of the led_write_channels syscall also aims at
closing the gap with the LED strip API.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
For the LED controller without any hardware blinking capability this
doesn't really make sense to make the blink callback mandatory. It is
better to let it undefined. This way this will allow the LED API to
fall back to a common software blink implementation.
In addition some controllers with RGB LEDs don't have the capability
to configure the LED brightness but only the channel/color levels.
Their drivers may only implement the set_color callback.
That's why this patch makes the blink and set_brightness LED API
callbacks optional.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
The led_set_color syscall adds support for multicolor (i.e.
multi-channel) LEDs to the LED API. It allows a user to set all the
colors/channels of a LED at once by passing a color array. Note that
this array must provide an entry per color/channel and must also be
ordered following the color mapping of the LED. This color mapping can
be either retrieved from the "color-mapping" DT property or from the LED
driver itself (by using the led_get_info syscall).
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
When supported by the driver the led_get_info syscall allows a user
to retrieve the following information about each LED available:
- The LED label.
- The number of colors/channels.
- And for a multicolor LED a pointer to a channel-color mapping.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Actually the LED API functions are handling channel objects. The "led"
parameter passed to the functions is defined as a channel number. This
patch redefines it as a LED number instead.
Note that this patch doesn't change anything for the drivers handling
mono-color (or single channel) LEDs. For the drivers handling multicolor
(or multi-channel) LEDs, such as the lp5562, then the API is broken.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
The led-controller DT binding gathers some common properties for LED
controllers and for the LED child nodes.
One notable property is "color-mapping" which allows to define a channel
to color mapping for multicolor LEDs.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
This fixes an error introduced in commit
9b2e9eda89
It seems that in a couple of instances, the "_VAL" suffix was
forgotten. One of these broke the le-audio build.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Make sure that the largest sockaddr_xx_ptr length is defined
last. Otherwise we might copy wrong amount of data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Saves us a few bytes of program text on arches that don't need
these implemented, currently all uniprocessor MPU-based systems.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We make a policy change here: all threads are members of a
memory domain, never NULL. We introduce a default memory domain
for threads that haven't been assigned to or inherited another one.
Primary motivation for this change is better MMU support, as
one common configuration will be to maintain page tables at
the memory domain level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We don't have use-cases and it introduces complexities with
allocating page tables on MMU systems.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Most if not all drivers use an internal function
spi_context_configured() to bypass reconfiguring the SPI peripheral
when nothing has changed. That function determines change based on
comparing the struct spi_config pointer that was last used. This does
not work if a user changes fields within the pointed-to structure.
Document that pointer comparison may be used to detect changes.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The x86 paging code has been rewritten to support another paging mode
and non-identity virtual mappings.
- Paging code now uses an array of paging level characteristics and
walks tables using for loops. This is opposed to having different
functions for every paging level and lots of #ifdefs. The code is
now more concise and adding new paging modes should be trivial.
- We now support 32-bit, PAE, and IA-32e page tables.
- The page tables created by gen_mmu.py are now installed at early
boot. There are no longer separate "flat" page tables. These tables
are mutable at any time.
- The x86_mmu code now has a private header. Many definitions that did
not need to be in public scope have been moved out of mmustructs.h
and either placed in the C file or in the private header.
- Improvements to dumping page table information, with the physical
mapping and flags all shown
- arch_mem_map() implemented
- x86 userspace/memory domain code ported to use the new
infrastructure.
- add logic for physical -> virtual instruction pointer transition,
including cleaning up identity mappings after this takes place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Private macros/function for converting a virtual address
to a physical address. Only works for a specific range
of virtual addresses (the permanent SRAM mappings).
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add encode utility mocre for 16 and 32 bits UUIDs that can be
used to in combination with BT_DATA_BYTES to include UUIDs
in advertising data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add defines for UUID values so that they can be used without
declaring a full bt_uuid struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is an extension to the existing FOR_EACH family of macros that
has a couple of twists that make it more useful in certain contexts,
as explained in the docstring.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This adds the necessary bits in arch code, and Python scripts
to enable coredump support for ARM Cortex-M.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a very primitive coredump mechanism under subsys/debug
where during fatal error, register and memory content can be
dumped to coredump backend. One such backend utilizing log
module for output is included. Once the coredump log is converted
to a binary file, it can be used with the ELF output file as
inputs to an overly simplified implementation of a GDB server.
This GDB server can be attached via the target remote command of
GDB and will be serving register and memory content. This allows
using GDB to examine stack and memory where the fatal error
occurred.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Many developers will be unfamiliar with UM10204 so document the rates
that are associated with the standard, fast, etc. speed names.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use CONFIG_TRACING_ISR to exclude tracing ISRs just like other
architectures.
Also, z_sys_trace_isr_exit was not defined (It was renamed some time ago
and this was forgotten...)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added additonal checks in net_ipv6_input to ensure that multicasts
are only passed to the upper layer if the originating interface
actually joined the destination multicast group.
Signed-off-by: Philip Serbin <philip.serbin@lemonbeat.com>
Elevate connections always to security mode 1 level 4 when
Secure Connections Only Mode has been enabled in the Security Manager.
Elevate connections always to security mode 1 level 3 when
Legacy pairing with OOB only has been enabled in the Security Manager.
Fixes: #27338
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The indentation went wrong when the integer types was changed
from the type "u8_t" to type "uint8_t". This changed the length
of the type and caused the code to look bad in places.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These macros are used to validate that regions aren't
programmed that allow both writes and execution.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some systems may need to associate arch-specific data to
a memory domain. Add a Kconfig and `arch` field for this,
and a new arch API to initialize it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Wrap the entire definition around CONFIG_MEMORY_PROTECTION.
Add incomplete declaration for IS_ENABLED() purposes.
Some arch code uses struct k_mem_partition internally for
MPU management, even if userspace isn't enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ifdef the entire struct k_mem_domain around CONFIG_USERSPACE,
this is specifically and only a userspace feature.
Add an incomplete definition for purposes of allowing the APIs
to be used with IS_ENABLED().
Prevents accidental useless instatiation of k_mem_domain structs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This now has its own header instead of kernel.h. The code is
unchanged other than a forward declaration of k_tid_t.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
So far SMP shell transport was initialized in APPLICATION run level, but
shell over UART was initialized in POST_KERNEL. This could end up in
situation when received frames were scheduled for further processing in
SMP layer, when it was not initialized yet.
Export smp_shell_init() function declaration and call it before shell is
initialized with all its receive data handlers. This prevents situation
when data is scheduled for processing in SMP layer, when that one is not
ready yet.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
net: route: Add prefix-based ipv6 multicast forwarding
This adds/reenables the feature of multicast routing/forwarding.
The forwarding decision is based on the added multicast routes
and the new network interface flag:
NET_IF_FORWARD_MULTICASTS.
Signed-off-by: Jan Georgi <jan.georgi@lemonbeat.com>
Added a #define for the maximum attribute length defined
by the core spec. Usefull for GATT servers and clients that
deals with long values.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
This patch implements optional authentication phase, which is done
between link establishment and network phases. It is part of LCP option
negotiation to decide whether authentication is needed and which
protocol will be used. For now we add only PAP support and try to
negotiate it when some other protocol (e.g. CHAP or EAP) is proposed
earlier. For simplicity reason we only add one way authentication
support, which means that we try to authenticate to the other peer, but
do not require authentication from it.
This is an important step to make PPP work with cellular network modems,
because most of them require to provide username and password within PPP
authentication phase. Those credentials are used by modem to login to
cellular network. In most cases however it is enough to provide dummy
values, because they are not verified. For this reason and simplicity of
this patch we hardcode PAP Peer-ID and Password now.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add enums of PAP, CHAP and EAP authentication protocols. Also add their
string representations, so they will nicely show up in logs during
debugging.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Shell will display a warning message if there was a request to print
a message on the not initialized shell backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Disable shell print functions if the shell is not initialized.
Update tests accordingly.
Fixes#27161
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
The header was missing the language linkage wrapper that allows the
driver-specific function to be located from C++.
Also it helps the poor user to be informed that the function is only
available when a special Kconfig option is set.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Some flash drivers are capable of issuing a JESD216 READ_SFDP command
to read serial flash discoverable parameters. Allow applications and
utilities access to API that reads the JEDEC ID from those devices.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Some flash drivers are capable of issuing a JESD216 READ_SFDP command
to read serial flash discoverable parameters. Allow applications and
utilities access to that capability where it's supported.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add function pointer to vtable and use that directly instead of
routing via ioctl() call. This is done as we are trying to get
rid of ioctl() calls in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not route close() calls via ioctl() as that is error prone
and quite pointless. Instead create a callback for close() in
fdtable and use it directly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The on-off manager infrastructure is designed to robust asynchronous
transition between binary states where multiple clients may be
initiating a transition from any context. The actual transition is
performed using a manager that tracks the current state and pending
operations. Requests are initiated by passing a reference to an
onoff_client object that holds client state including the notification
mechanism.
This API may be used in subsystems where the transitions for a
particular driver are always synchronous and isr-ok, e.g. setting a
SoC-controlled GPIO. In this situation the full on-off manager
infrastructure is wasteful. All we need is a record of the service
state: off, active count, or error.
Add a data structure and an API that can be used to replace the onoff
manager functionality in a situation where all transitions are isr-ok
and synchronous while retaining compatible behavior from the client
perspective.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
There is nothing wrong with instance numbers and they are
recommended for use whenever possible, but this is an API
design problem because it's not always possible to get nodes
by instance number; in some cases, drivers need to get node
identifiers from node labels, for example.
Change these APIs (which are not yet in any Zephyr release)
to take node IDs instead of instance IDs.
Fixes: #26984
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add clock controller support for Nuvoton NPCX series. This CL includes:
1. Add clock controller device tree declarations.
2. Introduce clock-cells in yaml file clock tree to get module's source
clock and turn off/on the its clock
3. Clock controller driver implementation.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Core 5.2, Vol 4, Part E, section 5.3.1 clarifies that advertising set
handle is assigned by host when advertising set is created and this
happens only on LE Set Extended Advertising Parameters.
An advertising set handle is an arbitrary number within allowed range,
i.e. 0x00-0xEF and not 0..max_supported-1.
This patch adds option to enable advertising set handle mapping from
HCI range as defined by Core specification to zero-based handles used
by LL. If enabled, HCI handle will be remapped to LL handle for each
command, otherwise HCI handle will be used as an LL handle. The latter
effectively skips mapping logic and should be used with Zephyr host
which uses zero based indexes.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This device isn't an actual hardware driver: it's a virtual EEPROM
that stores data in an instance-specific RAM buffer, with the data
exposed on an I2C bus as a I2C follower (slave) device that can be
controlled by another device acting as a leader (master) on that same
bus.
As such it's a reasonable example of how to write an I2C follower
driver, but it's not clear that it has a real use in applications. A
Zephyr application that needs to emulate an EEPROM in a real-world
system would be unlikely to provide its data from a RAM buffer.
The sole in-tree reference is in the i2c_slave_api test, so move the
driver implementation into that test.
The Kconfig and hierarchy are being left in place until it is more
clear how this functionality should be selectable within Zephyr. The
I2C_SLAVE symbol has been converted from menuconfig to config to
eliminate a Kconfig style diagnostic.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Open Supervised Device Protocol (OSDP) describes the communication
protocol for interfacing one or more Peripheral Devices (PD) to a
Control Panel (CP). The PDs are slave devices that waits for commands
from a CP. The communication happens over a RS485 multi-drop connection
with specification for a secure channel communication.
This patch adds initial support for OSDP in PD mode without secure
channel.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
* zephyr_linker_sources states that RODATA and RWDATA
included will be wrapped in an outer section, so
add these sections for the posix arch too.
Signed-off-by: Pete Johanson <peter@peterjohanson.com>
true and false in a C environment are macros that are defined to 1 and
0 respectively. In C++ they are keywords, and as such cause failures
when macro tests require they expand to a 1 or 0 token. Use the
actual token values rather than the macro names when defining the
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
struct device is by definition representing an device driver instance
and as such, driver_ prefix in attributes is rather redundant and can be
removed.
Fixes#27397
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There use to be a config attribute of type device_config, on which
config_info could be found. config_info was thus named that way to
differentiate easily from config attribute in struct device.
Now that there is no such device_config structure, config_info in
structure device now, can be renamed to config.
Semantically, it makes for sense. We have an attribute pointing to the
configuration of the device driver instance. Configuration information
is correct but has a redundant meaning.
Fixes#27397
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Added support for syncing to periodic advetisements.
The API and usage is heavily inspired by the extended advertisement
and connection APIs.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added the ext adv report interval to bt_le_scan_recv_info which
denotes whether or not there is periodic advertisement data
associated with the advertisement report.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added API to set periodic adv parameters, periodic adv data
and to enable/disable periodic advertisement.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
It does not auto-initiate the DLE procedure if the default data length
parameters are not equal to the initial parameters.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Some controllers do not follow the recommendation of auto-initiating
a data length update if the host writes default data length parameters.
If the controller follows this recommendation, calling
LE Write Suggested Default Data Length command is sufficient
to ensure that the LL will auto-initiate the DLE procedure. Performing
a second procedure is unecessary.
In Core v5.2, Vol 4, Part E, Section 7.8.35:
The HCI_LE_Write_Suggested_Default_Data_Length command allows the
Host to specify its suggested values for the Controller's maximum
transmission number of payload octets and maximum packet
transmission time for packets containing LL Data PDUs to be used
for new connections. The Controller may use smaller or larger values
for connInitialMaxTxOctets and connInitialMaxTxTime based on local
information.
In short, this command sets connInitialMaxTxOctets
and connInitialMaxTxTime.
In Core v5.2, Vol 6, Part B, Section 4.5.10:
For a new connection: connMaxTxOctets shall be set to
connInitialMaxTxOctets and connMaxRxOctets shall be chosen by the
Controller. If either value is not 27 then the Controller should
initiate the Data Length Update Procedure at the earliest practical
opportunity.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Document the behavior of bt_le_ext_adv_set_data ignoring either
advertising or scan response data when the configuration does
not support this type of data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Document need to register services that are always registered as dynamic
services with CCCs loaded from settings.
These services must be registered before calling settings_load.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
OT_RADIO_CAPS_SLEEP_TO_TX was added as a radio capability
for ieee802154 radio. Waiting on RX state before transmission
is alternative condition to OT_RADIO_CAPS_SLEEP_TO_TX support
as it was a result of OpenThread architecture and is actually
not needed in the Zephyr. Such change lets to start transmission
faster and lower SED device power consumption in active state
about 30%.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Allow user to enable CONFIG_NET_PKT_TXTIME and
CONFIG_NET_PKT_TXTIME_STATS at the same time. This will increase
memory consumption but as the CONFIG_NET_PKT_TXTIME_STATS is
only meant to be enabled for debugging purposes this overhead
can be accepted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect information how long net_pkt has travelled in IP stack
in certain points. See network documentation what these points
are and how to get information about the timings. This initial
commit adds support to TX timing collection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the CONFIG_NET_CONFIG_AUTO_INIT is not set, then let application
to do the initialization manually. In that case the app should call
net_config_init_app() when it is ready to setup the network.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
MISRA-C Directive 4.7 says that error information returned from
a function needs to be tested. In the logging macros,
return from _is_user_context() is not needed until logging is
enabled and above minimal logging level. There is a potential
that the return is not being used at all. So move it one level
below as it is surely being used within the if block.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Compile with arm-none-eabi-g++ (10.2.0) fails with:
error: designator order for field 'net_buf_pool::free' does not match declaration order in 'net_buf_pool'
because C++ doesn't support out-of-order designated initializers.
Signed-off-by: Rihards Skuja <rihardssk@mikrotik.com>
There exist zsock_ counterparts of the two mentioned
functions, but they were not exposed in the Zephyr POSIX API
(CONFIG_POSIX_API=y). This commit fills the gap.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Unaligned read-out capability become fact among all drivers.
Let's cut this in stone as API requirement.
fixes#16439
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
include/cache.h: System calls declaration and implementation
kernel/cache_handlers.c: Defination of verification functions
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
