Added implementation using mfifo to return stale AD data PDU
from LLL to Thread context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Kconfig option to configure maximum number of buffered
AD data PDUs across enabled advertising sets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a step towards phasing out DEVICE_INIT and just having
DEVICE_DEFINE. To make it a little easier on users or DEVICE_DEFINE
if they don't care about PM, they can just pass NULL for the
pm_control_fn paramater.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Put infrastructure for the following HCI commands/events in place:
* LE Set CIG Parameters command
* LE Remove CIG command
* LE Create CIS command
* LE Accept CIS Request command
* LE Reject CIS Request command
* LE CIS Established event
* LE CIS Request event
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Adds a `destroy` callback to the `struct bt_gatt_indicate_params` which
is used to signify to the application that the indication operation has
completed and the struct instance can be freed/destroyed.
This is required as the number of indication value callbacks that will
be triggered is not known by the caller when the `conn` parameter is
`NULL`.
Tracking when this callback should be run is mananged by a private
reference counter inside the struct.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the signature of the `bt_gatt_indicate_func_t` callback type by
replacing the attr pointer with a pointer to the
`bt_gatt_indicate_params` struct that was used to start the indication.
This allows the callback to free the `bt_gatt_indicate_params` instance
if it was allocated from storage, while still allowing the
`bt_gatt_attr` value to be accessed through `params->attr`.
Allocating the `bt_gatt_indicate_params` instance from storage is
desirable as multiple indications can be queued, however each instance
must be valid until the callback is run.
Implements API update from #29357
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This change enables support for DNS service discovery
(RFC 6763) in the mdns_responder service and sample app.
Fixes#29429
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change adds support for DNS Service Discovery (DNS-SD)
as described in RFC 6763.
Fixes#29099
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change adds net_context_port_in_use(), which is a simple
wrapper around net_context_check_port() and is used to check
if a particular socket is bound to a given IP address.
Fixes#29649
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Allow application to enable L2CAP dynamic channels without support
for Enhanced Credit Based Flow Control (CBFC).
Since these are separate features in the qualification it should
be possible to qualify L2CAP connection oriented channels without
also having to qualify L2CAP enhanced credit based flow control.
The L2CAP/LE/REJ/BI-02-C conformance test will fail when enhanced CBFC
has not been selected in the ICS.
The lower tester expects that since the Enhanced CBFC is not supported,
the command L2CAP_CREDIT_BASED_CONNECTION_REQ should be met with an
L2CAP_COMMAND_REJECT_RSP and not an L2CAP_CREDIT_BASED_CONNECTION_RSP.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Encapsulates the Heartbeat state and functionality in a separate
heartbeat module, removing all manipulation of the heartbeat state from
the transport and config server modules.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
according to the comment "all if no modules specified"
to support "all" state, set to 1 number of parameters.
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Adds various tests for mounting ELM FAT FS with FS_MOUNT_FLAG_NO_FORMAT
and FS_MOUNT_FLAG_READ_ONLY, and operations on read-only mounted
file system.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds various tests for mounting LittleFS with FS_MOUNT_FLAG_NO_FORMAT
and FS_MOUNT_FLAG_READ_ONLY, and operations on read-only mounted
file system.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The flags field has been added to fs_mount_t structure, accompanied
with two new flags:
FS_MOUNT_FLAG_READ_ONLY -- mount fs as read only
FS_MOUNT_FLAG_NO_FORMAT -- do not format volume when system not found
Code supporting the flags has been added to FS layer and drivers for
LittleFS and FAT FS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds FS_FATFS_READ_ONLY Kconfig option; the option, when
selected, excludes write supporting code within ELM FAT driver.
When write support to FAT FS volumes is not desired, this option may be
selected to slightly reduce code size.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds FS_FAFTFS_MKFS Kconfig option; the option, y by default,
allows to include mkfs supporting code, within fs_mount callback,
for ELM FAT file system driver.
When formatting of FAT FS volumes is not desired, this option may be
deselected to slightly reduce code size.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Do not send the original pkt in 6lo based networks as in those
the IPv6 header is mangled and we would not be able to do any
resends of the original pkt. So for 6lo networks, clone the
pkt and send it to peer. The original pkt is kept in sent list
in case we need to resend to peer.
Fixes#29771
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Track the number of dropped TCP data segments and number of dropped
TCP packets in network statistics. It is useful to see these
numbers separately.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a simple backoff mechanism between consecutive registration attempts
in case of registration failures. Finally, notify the application in
case the registration failed several times.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Refactor the boostrap regstration procedure, by splitting the message
creation and sending into a separate function, in similar manner as
it's done with regular registration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, when socket errors occur during receive, the LwM2M engine
restarts the state machine and registers again to the server. While this
works in simple use case (only RD client socket open), it's not a valid
approach when more sockets are open (FW update socket).
Fix this by introducing socket fault callback, which is registered by
the LwM2M engine users. This way, a proper socket owner is notified on
error and can pertake appropriate action.
For RD socket errors the behaviour remains the same - the state machine
is reset and the client registers again to the server. For FW update
socket, handle the error by reopening the socket and retransmitting the
last request. This allows to resume the download from the point the
error occured, w/o a need to start from scratch.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Places definition of lll under the ADV_EXT #ifdef in lll_adv.c:isr_tx,
to silence build warnings for non-AE builds.
Follow-up from #29753.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Call mbedtls_ssl_conf_max_frag_len() on created TLS context
configuration, so that Maximum Fragment Length (MFL) will be sent to
peer using RFC 6066 max_fragment_length extension. MFL value is
automatically chosen based on MBEDTLS_SSL_OUT_CONTENT_LEN and
MBEDTLS_SSL_IN_CONTENT_LEN mbed TLS macros.
This extension is mostly useful for TLS client side to tell TLS server
what is the maximum supported receive record length.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
We need to use actual phy wherever required to make sure radio delays
are calculated properly. This is especially important for LE Coded
since delays for that phy are significantly higher than on 1M and 2M.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
ull_adv_data_set() is only used for legacy advertising data (either via
legacy HCI command or as fallback for extended advertising set which
uses legacy PDUs) so there is no need to check for extended advertising.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We handle secondary channel only for extended advertising sets, that
means we always have ADV_EXT_IND on primary channel so there is no need
to support non-ext PDUs here.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Replaces all existing variants of value clamping with the MIN and MAX
macros with the CLAMP macro.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This commit corrects the maximum allowed amount of children to
match Thread specification.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The objects should be const-qualified for consistency with other uses,
including declarations in headers.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If the peer ACKs data when it closes the connection, update
our sequence number accordinly. The connection would eventually
be terminated but this will avoid extra resends by the peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a connection is being closed, it is possible that the application
will have a lock to net_context and TCP2 connection lock. If we then
receive a final TCP2 ACK and close the connection, the locking order
get switched and TCP2 will first try to get its own lock and then the
net_context lock. This will lead to deadlock as the locking ordering
is now mixed.
The solution is to unref the TCP connection after releasing the
connection lock. The TCP connection unref function will anyway get the
lock so no need to do double locking.
Fixes#29444
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When building the osdsp control_panel sample we get the following
compile error:
subsys/mgmt/osdp/src/osdp_cp.c:993:10: error: implicit declaration of
function 'osdp_cp_send_command_keyset'
Fix by adding ifdef protection around the call to
osdp_cp_send_command_keyset
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If there are enough tls_context objects in the system (configured by
CONFIG_NET_SOCKETS_TLS_MAX_CONTEXTS), but there are not enough file
descriptors (configured by CONFIG_POSIX_MAX_FDS) to create underneath
TCP/UDP socket, then TLS socket creation fails with leaked tls_context.
Call tls_release() in ztls_socket() error path whenever underneath
TCP/UDP socket creation fails.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The power and chip detect gpios are optional device tree properties for
the nxp usdhc driver. Fixes a build error on the mm_swiftio board, which
does not set the power gpio property.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
According to LwM2M specfication v1.0.2, par. 5.3.2, the LwM2M client
MUST send an “Update” operation to the LwM2M Server whenever the
lifetime parameter of the Server object changes the server). The same
applies for the object instances created/deleted. The changes in objects
seem to already be handled, but the lifetime was not.
Additionally, the "Update" message shall only contain these parameters
which changed since the last update (including objects). As it's
straightforward to determine if the liftime changed but it's not easy
to tell if there were updates in the object instances, add an
additional parameter to the engine_trigger_update() function, indicating
that new object information shall be sent in the "Update" message.
Eventually add a proper error checking in `sm_send_registration` as the
function is reworked anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The memset on firmware_ctx during PULL FW update initialization will
set the socket descriptor to a valid value of 0. This leads to an error
if parsing of the URI provided by the server fails, and the firware_ctx
is closed - the socket with a descriptor 0 will be accidently closed.
Fix this by invalidating the socket FD after the memset on
initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It shouldn't be optional to handle separate response, as it's a
mandatory requirement according to the RFC7252:
"The protocol leaves the decision whether to
piggyback a response or not (i.e., send a separate response) to
the server. The client MUST be prepared to receive either."
Therefore, remove the flag as separate responses are handled now
properly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Separate response handling implemented in the engine was faulty. The
separate response was not acknowledged by the client, resulting in
spurious retransmissions from the server side.
Also, the pending CON message was retransmitted by the client even after
it was acknowledged by an empty ACK, but the respnse haven't arrived
yet. Fix this by adding a new `acknowledged` flag to the `lwm2m_message`
structure. Once acknowledged, the flag is set and the confirmable
message is no longer retransmitted. We keep the message on the pending
list in order to timeout properly in case separate response does not
arrive in time.
Finally, prevent the reply callback from being called twice in case
the response is transmitted separately from ACk. The callback should
only be called on the actual reply, not the empty ACK.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
