This needs to be in <arch/cpu.h> so that it can be called
from the k_panic()/k_oops() macros in kernel.h.
Fixes build errors on these arches when using k_panic() or
k_oops().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Unlike assertions, these APIs are active at all times. The kernel will
treat these errors in the same way as fatal CPU exceptions. Ultimately,
the policy of what to do with these errors is implemented in
_SysFatalErrorHandler.
If the archtecture supports it, a real CPU exception can be triggered
which will provide a complete register dump and PC value when the
problem occurs. This will provide more helpful information than a fake
exception stack frame (_default_esf) passed to the arch-specific exception
handling code.
Issue: ZEP-843
Change-Id: I8f136905c05bb84772e1c5ed53b8e920d24eb6fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Scanning for typos in comments and strings.
Change-Id: I3d4db89e0824959252c79c19baa50028354247bd
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Current users of sys_bitfield*() are bending over backwards to cast
what is most of the times a pointer into an integer.
Bitfields can be better described with an void *, so
uint{8,16,32,64}_t or any other container can be used. Most
sys_bitfield*() operations, by extension, can do the same. Note void *
has byte arithmetic, like char *.
This change will also make it implicit, for any future split of the
address space between virtual (what the SW is seeing) and physical
(what the HW is seeing) way clearer, as the functions dealing with
physical, non directly referentiable/mappeable addreses to use an
integer type, like mem_addr_t.
- include/arch/ARCH/*asm_inline*:
- sys_bitfield*() all modified to take 'void *'
Note 'void *' arihtmethic is byte based, which makes some things
easier.
- include/sys_io.h:
- introduces DEFINE_BITFIELD
- update docs
- tests/kernel/bitfield: remove all the cast contortions, use DEFINE_BITFIELD
PENDING: update other TCs
- include/arch/nios/nios2.h, drivers/interrupt_controller/ioapic_intr.c:
remove cast contortions
Change-Id: I901e62c76af46f26ff0d29cdc37099597f884511
Jira: ZEP-1347
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Some arches may want to define this as an inline function, or
define in core arch code instead of timer driver code.
Unfortunately, this means we need to remove from the footprint
tests, but this is not typically a large function.
Issue: ZEP-1546
Change-Id: Ic0d7a33507da855995838f4703d872cd613a2ca2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In order for OpenOCD to have a high-level view of an RTOS, it uses the
GDB protocol to obtain symbols from the system.
The GDB protocol, however, does not allow obtaining fields from
structures directly, and hardcoding offsets is not only brittle (due to
possibly different architectures or changes in the code), it's also
infeasible considering Zephyr is highly-configurable and parts of key
structs can be compiled in or out.
Export an array with offsets for these key structs. Also add a version
element in that array to allow changes in those structs.
Change-Id: I83bcfa0a7bd57d85582e5ec6efe70e1cceb1fc51
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This private data structure now no longer introduces a typedef or
uses CamelCase. It's not necessary to specify the size of extern
arrays, so we don't need a block of #ifdefs for every arch.
Change-Id: I71fe61822ecef29820280a43d5ac2822a61f7082
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Memory accesses could be reordered before an irq_lock() or
after an irq_unlock() without the memory barriers.
See commit 15bc537712 for the
ARM fix for a complete description of the issue and fix.
Change-Id: I1d96fe0088d90150f0888c2893d017155fc0a0a7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If a particular project needs to add additional data to the
binary image, in most cases the entire linker script needs to
forked into the project space, causing maintenance issues if
the main linker script is changed.
Now we add some Kconfig options to allow a project to specify
some additional linker scripts which get included by the main
one in a few key areas:
1) In the definition to the 'rodata' section, which can allow
additional data to be included in this ROM section.
2) In the definition to the 'datas' section, which allows
additional data to be included in this RAM section.
3) Arbitrary additional sections to be included at the end of
the binary.
For 1 and 2, this is useful to include data generated outside of
the normal C compilation, such as data structures that are created
by special build tools.
3 is useful for including arbitrary binary blobs inside the final
image, such as for peripheral or co-processor firmware.
Change-Id: I5738d3d6da25f5bc96cda8ae806bf1a3fb34bd5d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are a number of data sections that are repeated across
all the linker scripts for various architecture. In practice these
don't always get updated and we have had problems with bit-rot.
Consolidate these to make maintenance easier.
x86 linker scripts now follow the same naming convention and we
get rid of a linker-epilog.h that wasn't necessary and whose purpose
has been lost to the mists of time. If applications want to define their
own sections they should be allowed to. Linker scripts for x86 do not
end with .h any more, they are not C header files even though we use
C's preprocessor.
Issue: ZEP-688
Change-Id: I893eb4619969695c1f980efd7c2ec9fa5dad136d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
With this patch we introduce unified kernel support for NIOS II.
Not all test cases have been ported, but the following command
currently succeeds with 43/43 passing test cases:
$ sanitycheck --arch=nios2 -xKERNEL_TYPE=unified \
--tag=unified_capable
Issue: ZEP-934
Change-Id: Id8effa0369a6a22c4d0a789fa2a8e108af0e0786
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Binutils ld has an annoying misfeature (apparently a regression from a
few years ago) that alignment directives (and alignment specifiers on
symbols) apply only to the runtime addresses and not, apparently, to
the load address region specified with the "AT>" syntax. The net
result is that by default the LMA output ends up too small for the
addresses generated in RAM. See here for some details:
https://sourceware.org/ml/binutils/2013-06/msg00246.htmlhttps://sourceware.org/ml/binutils/2014-01/msg00350.html
The required workaround/fix is that AFAICT any section which can have
inherit a separate VMA vs. LMA from a previous section must specify an
"ALIGN_WITH_INPUT" attribute. Otherwise the sections will get out of
sync and the XIP data will be wrong at runtime.
No, I don't know why this isn't the default behavior.
A further complexity is that this feature only works as advertised
when the section is declared with the "AT> region" syntax after the
block and not "AT(address)" in the header. If you use the header
syntax (with or without ALIGN_WITH_INPUT), ld appears to DOUBLE-apply
padding and the LMA ends up to big. This is almost certainly a
binutils bug, but it's trivial to work around (and the working syntax
is actually cleaner) so we adjust the usage here.
Note finally that this patch includes an effective reversion of commit
d82e9dd9 ("x86: HACK force alignment for _k_task_list section"), which
was an earlier workaround for what seems to be the same issue.
Jira: ZEP-955
Change-Id: I2accd92901cb61fb546658b87d6752c1cd14de3a
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Nios II appears to have an issue with the 'stbio' instruction.
When executing this code:
0x00400848 <+136>: stbio r3,0(r2)
With these registers:
r2 0x44000c 4456460
r3 0x3 3
The memory location (which is a memory-mapped register in the
NS16550 IP block) ends up with the value 0x103 instead of 0x3 as
expected. Before the instruction ran, the register had 0 in it.
32-bit version doesn't seem to have this problem, use that
everywhere for now. This issue has been reported to Altera.
Change-Id: I4ff0ff4cc7f9b18006d3f7a777eb292924843644
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now allow use of -mgpopt=global and -mgpopt=data. The 'global'
option is now the default instead of compiler-default local, expanding
global pointer usage to all small data in the system.
For systems where all RAM is less than 64K, the 'data' option may be
appropriate.
Some fixes had to be made to the system in order to get around some
issues:
* prep_c.c no longer uses fake linker variables to figure out the size
of data or BSS, as these gave the linker fits as it tried to compute
relative addresses to them.
* _k_task_ptr_idle is create by sysgen and placed in a special section.
Any small data in a special section needs to be declared extern
with __attribute__((section)) else the compiler will assume it's in
.sdata.
* same situation with extern references to k_pipe_t (fixed pipe_priv
test)
For legacy applications being ported to Nios II which do things that
freak out global pointer calculation, it can be disabled entirely.
Change-Id: I5eb86ee8aefb8e2fac49c5cdd104ee19cea23f6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
needs to be 0x8000 after .sdata and .sbss sections since
register offsets are 16-bit signed values.
Change-Id: Ia7486d32af81e54a6ebac6be7ec308dfdeafe79e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The caches get initialized on boot and flushed after XIP copy
takes place.
Change-Id: I642a14232835a0cf41e007860f5cdb8a2ade1f50
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are not going to handle unimplemented math instruction
exceptions at runtime. Remove remaining comments and exports
related to this. We don't need to leave a gap in the exception
stack frame for it either.
Change-Id: I4f1f3980a0e43bbf6f2f7488a9182f7acb06be05
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are no-ops since this is not an arch that isn't byte-
addressable.
Change-Id: I09b0fd8b8d85f67bcca2dcb6ebc35843c19afa45
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Supports Internal Interrupt Controller only for now; EIC
supoort tracked in ZEP-258.
Change-Id: I2d9c5180e61c06b377fce4bda8a59042b68d58f2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The technical manuals and example HAL code frequently refer to
register bank numbers from some base address. Add these helper
functions to read and write registers correctly using this
notation.
Change-Id: Ia082f5cc89081fcea2cb6ad8204c1b9b2650d3fd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The KEEP() is only necessary for the exception entry point
as it sits at a magic memory address and isn't referenced by
other code.
Change-Id: I8443e8aa23059b65eaf9c5a1cf3f9b14b04737d5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This isn't directly referenced by other code in the binary,
it just sits at a magic memory address. Make sure gc-sections
doesn't throw it away.
Change-Id: I1c00a163dbf2eb4866ebadc7f1d70bcc6845b8d1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These aren't valid in all circumstances; the reset vector in most cases
needs to be in ROM.
Change-Id: I83df8762eecc53c99af92f3b0972dfbafac457fb
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The problem is doxygen's parser is getting confused by constructs as:
static inline __attribute__((always_inline))
void sys_out8(uint8_t data, io_port_t port)
{
_arc_v2_aux_reg_write(port, data);
}
Too many words at the beginning of the function definition. So change
to use the macro ALWAYS_INLINE (which is already defined to mean
'inline __attribute__((always_inline))`.
Kills:
sys_io.h:37: warning: documented symbol `static inline void sys_out8' was not declared or defined.
sys_io.h:47: warning: documented symbol `static inline uint8_t sys_in8' was not declared or defined.
sys_io.h:58: warning: documented symbol `static inline void sys_out16' was not declared or defined.
sys_io.h:68: warning: documented symbol `static inline uint16_t sys_in16' was not declared or defined.
sys_io.h:79: warning: documented symbol `static inline void sys_out32' was not declared or defined.
sys_io.h:89: warning: documented symbol `static inline uint32_t sys_in32' was not declared or defined.
sys_io.h:120: warning: documented symbol `static inline int sys_io_test_bit' was not declared or defined.
sys_io.h:133: warning: documented symbol `static inline int sys_io_test_and_set_bit' was not declared or defined.
sys_io.h:146: warning: documented symbol `static inline int sys_io_test_and_clear_bit' was not declared or defined.
sys_io.h:161: warning: documented symbol `static inline void sys_write8' was not declared or defined.
sys_io.h:171: warning: documented symbol `static inline uint8_t sys_read8' was not declared or defined.
sys_io.h:182: warning: documented symbol `static inline void sys_write16' was not declared or defined.
sys_io.h:192: warning: documented symbol `static inline uint16_t sys_read16' was not declared or defined.
sys_io.h:248: warning: documented symbol `static inline int sys_test_bit' was not declared or defined.
sys_io.h:261: warning: documented symbol `static inline int sys_test_and_set_bit' was not declared or defined.
sys_io.h:274: warning: documented symbol `static inline int sys_test_and_clear_bit' was not declared or defined.
Change-Id: Id10e9b6cd44a370ccc732c17b23fb66bd1845205
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
We will require 6 variables to be defined by SOC-specific
linker script; these values in turn can be pulled from
defines in layout.h.
To help position code correctly we define two new ELF sections
for this arch, 'reset' and 'exceptions'.
Change-Id: Idffbd53895945b7d0ec0aac281e5bf7c85b4b2c2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This header was pulled in verbatim from Altera HAL and had
some style and naming issues. The inline functions or macros
which read registers can now be used in expressions.
Change-Id: I7a463717051efd2f9dd36e8a84d357852fbf9215
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Nios II has no special instructions for testing bits, ffs, etc.
However, when poking memory-mapped peripherals, special *io variants
of ld and st instructions must be used to avoid issues with the
caches.
find_msb_set / find_lsb_set are implemented using universal GCC
compiler built-ins. It's not clear why this approach was not taken
on other arches.
The sys_in/sys_out/sys_io functions are completely removed as there
is no concept of these on Nios II.
sys_read/sys_write functions implemented using special GCC builtins
for the Nios II so that we don't have to use inline assembly.
Rest of the operations implemented in C, there is no requirement that
they be atomic.
Change-Id: Ic251fc7d7f342543dace4ccb3e429937b303215e
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This file is taken verbatim from the Altera Nios II HAL
source and includes various useful processor defines
and macros.
Change-Id: Idbf0b49bebe33bb5a53f5155d927bafadda9a2fe
Origin: nios2.h Altera Nios II HAL
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
BSP builds for Nios II generate a linker.h and system.h which reflects
the configuration for that CPU. This can vary depending on how the CPU
is wired up in QSYS, so it needs to be at the SOC level--we essentially
treat any given CPU configuration as a SOC in Zephyr build terms.
Include these files from <arch/cpu.h>.
Change-Id: I12f76600107fec1a14a2f9cb82b0f55915ec03a6
Origin: Altera Quartus tools, machine generated
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Got lost in the .gitignore when these files had .cmd
extension.
Change-Id: I8a8d51014b621026b739525f3f9a3e8a20cb5ad0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ZEP-252 will handle implementation of the code here.
Change-Id: I3e9a6c7cdf2d5a3b0240317b772628fead528095
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
At the moment this just jumps into prep_c, with comments left
on other things that need to be done. Having this here ensures that
the early boot code isn't discarded by gc-sections.
vector_table.c removed, it isn't the right approach for this CPU.
Proper method for initializing reset and exception vectors still
being investigated.
Change-Id: Id7965c671f1a55c42ecfb65119497405a646bec4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Basic build framework for Nios2. Everything is stubbed out,
we just want to have a build going so that we can start to
parallelize implementation tasks.
This patch is not intended to be functional, but should be
able to produce a binary for all the nanokernel-based
sanity checks.
Change-Id: I12dd8ca4a2273f7662bee46175822c9bbd99202a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
