The bluetooth.h header file uses a different tabulation style in the
documentation headers, which for recent Doxygen versions generates
verbatim blocks. This disables usage of the @option ALIAS because
verbatim blocks cannot be nested. With this commit the documentation's
tabulation is fixed and `@option` is used to resolve Kconfig options.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
This updates Kconfig options in the Doxygen documentation to use the new
@option ALIAS. There are three categories of fixes:
* Use of `:option:` inside Doxygen headers, which is not valid (this is
rST syntax!).
* Kconfig options that were just written as plain text and were no
references were generated.
* Use of `@rst` blocks where the only reason for using them was to have
Kconfig options resolved.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
The fix to handle long duration timeouts in 150e18de6e also
changed the duration value from signed to unsigned. This can cause
delays in processing alarms when timer handlers run longer than a tick
(either due to delays or if there are many of them). Revert to a
signed representation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The non-secure callable functions' section is only applicable
to Cortex-M with TrustZone-M extension. Remove it from AARCH64
linker script. (CONFIG_ARM_FIRMWARE_HAS_SECURE_ENTRY_FUNCTIONS
is only enabled for Cortex-M so this is a no-op, but still, it
is a useful cleanup.)
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added configuration for approach to starting system clock source.
There are 3 options: no wait, wait untill available, wait until
stable.
Added support for those modes in clock control driver which handles
low frequency source clock.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The default value of clean_session flag was made configurable in
commit 0fd16f8b78 but the docstring was
not updated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Telling that all the driver supports unaligned writes was and
is not true. Drivers only have to support any source buffer.
This fix message introduced by #23628
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This code had one purpose only, feed timing information into a test and
was not used by anything else. The custom trace points unfortunatly were
not accurate and this test was delivering informatin that conflicted
with other tests we have due to placement of such trace points in the
architecture and kernel code.
For such measurements we are planning to use the tracing functionality
in a special mode that would be used for metrics without polluting the
architecture and kernel code with additional tracing and timing code.
Furthermore, much of the assembly code used had issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add timing functions and APIs. This is now used with some of the tests
we have for performance and metrics and will be used whereever timing
informations are needed, for example for tracing, profiling and other
operations where timing info is critical.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
According to Intel 64 and IA-32 Architectures Software
Developer’s Manual, volume 3, chapter 8.2.5, LFENCE provides
a more efficient method of controlling memory ordering than
the CPUID instruction. So use LFENCE here, as all 64-bit
CPUs have LFENCE.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Do not force linker to place text sections after each other
to have more freedom to optimize.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Create include/toolchain/mwdt.h to handle difference in
several macros for MWDT and ARC GNU toolchains.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
MWDT toolchain adds additional suffix to sections name in case of
ffunction-sections / fdata-sections are enabled.
As proposed by Andy Ross let's pick a single set of rules
and syntax that work.
Suggested-by: Andy Ross <andy@plausible.org>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
ARC MWDT assembler has slightly different directives names:
.pushsect instead of .pushsection
.popsect instead of .popsection
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Add linker script template for MWDT toolchain (linker-mwdt.ld)
Move linker.ld to linker-gnu.ld (without changes)
The "linker.ld" is wraper now.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Make the assembly codes compatible with both GNU
and Metaware toolchain.
* replace ".balign" with ".align"
".align" assembler directive is supposed by all
ARC toolchains and it is implemented in a same
way across ARC toolchains.
* replace "mov_s __certain_reg" with "mov __certain_reg"
Even though GCC encodes those mnemonics and even real
HW executes them according to PRM these are restricted
ones for mov_s and CCAC rightfully refuses to accept
such mnemonics. So for compatibility and clarity sake
we switch to 32-bit mov instruction which allows use
of all those instructions.
* Add "%%" prefix while accessing registers from inline
ASM as it is required by MWDT.
* Drop "@" prefix while accessing symbols (defined in C
code) from ASM code as it is required by MWDT.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
/#
Replace ASM sys_io implementation with identical C code for ARC.
This significantly improves portability, i.e. compiler decides
which instructions to use for a particular CPU and / or
configuration.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
GNU toolchain and MWDT (Metware) toolchain have different style
for accessing arguments in assembly macro. Implement the
preprocessor macro to handle the difference.
Make all ASM macros in swap_macros.h compatible for both ARC
toolchains.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Switch to the _arch_switch() API that is required for an SMP-aware
scheduler instead of using the old arch_swap mechanism.
SMP is not supported yet but this is a necessary step in that direction.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This introduces bt_gatt_attr_get_handle which can be used to resolve
handles of static attributes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
fallthrough attribute was introduced in gcc 7. For older versions the
macro is empty to avoid the follow warnning:
~/zephyrproject/zephyr/lib/os/printk.c:268:5: warning: empty declaration
__fallthrough;
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a generic host command handler framework that allows users to
declare new host command handlers with the HOST_COMMAND_HANDLER macro
at build time. The framework will handle incoming messages from the
host command peripheral device and forwards the incoming data to the
appropriate host command handler, which is looked up by id.
The framework will also send the response from the handler back to the
host command peripheral device. The device handles sending the data on
the physical bus.
This type of host command communication is typically done on an embedded
controller for a notebook or computer. The host would be the main
application processor (aka AP, CPU, SoC).
Signed-off-by: Jett Rink <jettrink@google.com>
The host command peripheral device API abstracts how an embedded
controller sends and receives data from a host on a bus. Each bus like
eSPI, SPI, or I2C would implement their own host command peripheral
device. Each hardware device would then handle the necessary hardware
access to send and receive data over that bus.
The chosen host command peripheral device will be used by the host
command handler framework to send and receive host data correctly.
Signed-off-by: Jett Rink <jettrink@google.com>
Added macro that helps to declare multi-instance services. The macro
allows to statically define service structure array. Each element of
the array is linked to the service attribute array that is provided
by the user.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Allow the application to add subscription without resubscribing.
This is needed for persistent bonds that can go to deep sleep and
turn of the RAM or power-cycle.
In this case the application as a GATT client must have a way to add
the subscription callbacks back to the stack before the GATT server
sends notifications.
This should preferable be able to be done before even connecting
since the notifications can arrive immediately after connecting to
the peer.
The stack cannot persist this on it's own since it must remember the
function pointers for the callback functions. Storing these in
persistent storage would not be compatible with a Device Firmware
Upgrade (DFU) solution.
Fixes: #21798
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Clarify the note about the lifetime of the subscribe parameters.
The note uses subscribe procedure lifetime, but the parameters
must remain valid after having subscribed as well, until the
subscription is removed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add handling of the HCI_Hardware_Error event to log the hardware code.
This event was unmasked in set_event_mask.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Some of what's supposed to be in <time.h> was lost because this header
attempts to define everything using more primitive include files.
Instead incorporate the contents from the toolchain-provided header.
Any gaps should be picked up by the legacy content present in this
file, which should not conflict with the toolchain header.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit extends USB hid API callbacks by adding
'const struct device *dev' parameter. If the application
configured more than one HID device then it must specify
separate hid_ops for each device as its unable to determine
for which device the callback was called.
This patch makes it possible to have only one hid_ops within
the application and the application is aware for which device
the callback was called because of explicit device pointer.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Those APIs are used for deleting appkey, unbinding an application
from SIG model, unbinding an application from vendor model on the
target node, with matching shell command.
Signed-off-by: YanBiao Hao <haoyanbiao@126.com>
Some of the names used in `struct osdp_cmd` where directly as in the
specification. Initially it appealed to keep them like that but with
time, a little more consistent naming of members helps if you haven't
read the specification document very recently.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Following the PD mode implementation (9a91b4ad), this patch adds support
for CP mode of operation in OSDP.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
The smp_shell_rx_byte has been renamed to smp_shell_rx_bytes and now
accepts data buffer pointer and its size as parameters. Return value
has been changed to size_t and represents number of bytes processed from
the given buffer.
The change has been done to more efficiently serve most common scenario
when the function is called in loop to process buffer, byte by byte.
Previously such operation required passing each byte separately,
with the change the function will work directly on source buffer
reducing number of calls and byte copy operations.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Zephyr allows an application to register additional file systems,
which may have maximum filename lengths different from the in-tree
FatFs and littlefs options. Provide a Kconfig variable that allows
the default inference to be overridden.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The documentation claims that Zephyr supports external file system
implementations, and there's no reason not to do so. Rework the API
to allow this.
Note that the file system type cannot legally be an enum anymore,
since we need to support file system types that don't have an
identifier assigned in that enum. Rely on the implicit conversion of
enum values to int to preserve backwards compatibility.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
