Configure build variable BL2 depending on board configuration. BL2 is
set to True by default. BL2 enabled building TFM with MCUboot.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
When running shell commands updatehub alloc data from shell stack.
Increase shell room stack to avoid shell issues. Memory tuning
should be performed accord with available resources.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Added a Bluetooth Peripheral sample that demonstrates how to use
GATT Object Transfer Service.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add the supported features section to serpente.yaml and overlay files
to the corresponding tests and samples.
Signed-off-by: Alexander Falb <fal3xx@gmail.com>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use time(), localtime_r(), and asctime() to confirm that the
declarations required for these (newlib) libc functions are made
available in CONFIG_POSIX context.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit extends USB hid API callbacks by adding
'const struct device *dev' parameter. If the application
configured more than one HID device then it must specify
separate hid_ops for each device as its unable to determine
for which device the callback was called.
This patch makes it possible to have only one hid_ops within
the application and the application is aware for which device
the callback was called because of explicit device pointer.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Some of the names used in `struct osdp_cmd` where directly as in the
specification. Initially it appealed to keep them like that but with
time, a little more consistent naming of members helps if you haven't
read the specification document very recently.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Add a OSDP CP mode sample that sends out a periocic command to a
connected PD. It also demosnstrates key press and card read callback
registration.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
nRF53 application core does not have RNG peripheral.
Software implementation must be used instead.
This patch adds config overlay for hid-cdc nRF5340 sample.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Added, build only, native_posix_64 board to sample.yaml file.
This will cover both compilation of the SDL display driver and
kscan driver.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Receiver part reworked to not block in interrupt and rely on assumption
that uart_fifo_read is capable of reading incoming data from the HW.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Given that TLS/DTLS socket now creates an underlying TCP/UDP socket, the
FD consumption is increased in echo_client and echo_server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Sample example built with gdbstub enabled. Two serials are used, one for
normal output and another one that is used talk with gdb in the host
machine.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add support for running the JEDEC SPI NOR flash sample on the ARM
Cortex-M3 DesignStart FPGA reference implementation.
Special care is needed to avoid overwriting part of the FPGA
configuration bitstream, which is stored in the onboard QSPI flash.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add configuration and overlay files for Adafruit feather nRF52840.
README has also been updated and improved. Documentation related to
littlefs has been moved to an independent section as it could apply to
any sample.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Following the change to use the C domain for parsing, update all
existing :cpp:func: references to :c:func:. Remove the parentheses as
well, if used, because they are not needed, this is already known to be
a function, and how it is displayed in the documentation later is a
semantic decision done by the output builder.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Trims the default memory configuration for the BBC Microbit in mesh
samples to ensure that it fits.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add sample where a fictious lenghty operation is required before a more
elaborate handshake is perform with eSPI master.
This requires sending SLAVE_BOOT_DONE virtual wire explicitly.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This sample controls up to 12 LEDs connected to a LP503x driver.
First, for each LED information is retrieved using the led_get_info
syscall and printed in the log messages. Next, from an infinite loop, a
test pattern (described below) is applied to all the LEDs simultaneously
(using the led_write_channels syscall) and then to each LED one by one
(using the led_set_{brightness,color} syscalls).
Test pattern:
For each color in red green blue white yellow purple cyan orange:
- set the color
- turn on
- turn off
- set the brightness gradually to the maximum level
- turn off
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
The spi_flash_w25qxxdv driver has been superseded by the generic
spi_nor driver for over a year. The only non-refactoring change to
the W25Q driver in the last 18 months was done to support a backport
to 1.14.
All devices supported by spi_flash_w25qxxdv driver are expected to be
supported by the spi_nor driver, using the standard `jedec,spi-nor`
devicetree compatible. No in-tree devicetree files make use of this
driver.
Remove the confusion about which driver to select by removing the
unmaintained redundant driver.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add CONFIG_NET_CONFIG_AUTO_INIT=y to enable the bluetooth
device network interface.
Due to #27405 feature PR allowing application to init the network
whenever it wants, IPSP sample stopped initing the
bluetooth network.
The IPSP sample was not updated to enable
CONFIG_NET_CONFIG_AUTO_INIT in prj.conf
and didn't call net_config_init_app(...)
as suggested in the feature PR.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
