Increased accepted difference between system clock and
k_busy_wait clock. Some platforms (e.g. Nordic SoC) are using
different clocks for system clock (low frequency) and k_busy_wait
(high frequency). If those clocks are driven from low accuracy
source like RC oscillator then difference may be significant.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added new doxygen tags for tests:
1. test_mem_domain_destroy
2. test_domain_add_part_drop_to_user
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Reason is that some threads tests have poor description Doxygen
tags. I decided to fix that situation in some tests which understand.
Update Doxygen tags for the next tests:
test_create_new_supervisor_thread_from_user()
test_user_mode_enter()
test_create_new_higher_prio_thread_from_user()
test_create_new_thread_from_user_huge_stacksize()
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
PA selection mainly depends on board design. So it looks like
device-tree is a better mechanism than Kconfig in this case. Use string
property with two possible values: "rfo" and "pa-boost".
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Test of the sys_heap_aligned_alloc() API. This is separate from the
existing heap test because aligned_alloc() requires a kconfig to
enable it that can change the heap block header format and will impact
code coverage of the "small" block variant.
It's a fairly simple whitebox test that instantiates a heap and then
enumerates all possible alignments within it, with and without
pre-allocated data, to verify that the resulting memory is correctly
aligned and the heap stays consistent.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This is done to support the idiomatic way of performing flush
operations, where the caller might not have access to the proper data
pointer. Also, there is no reason why reading from address 0 should
not be allowed.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
With addition of flash_get_parameters API call, it is needed to provide
support for the API to flash drivers.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This test has a very high failure rate on `qemu_arc_em` and needs to be
disabled until a fix is available.
To be addressed in #26163.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Passing TX messages from sockets was reworked for openthread
thus tests need to be created/updated in order to pass.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
A hardcoded path lenth of 80 will not be able to suppor the full length
of 255 when LFN is enabled. This does produce a compiler error,
thankfully, this is only applicable to the test cases.
Signed-off-by: Roman Vaughan <nzsmartie@gmail.com>
After reviewing that test I found output looks too messy.
1. Remove words starting from capital letter in the middle of the
sentence.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This tests make sure that the right source address is chosen during
the mesh multicasting.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit removes API functions and macros which were deprecated in
2.2 release. GPIO drivers are updated accordingly.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update code comments in ringbuffer/src/main.c
modify a testcase to verify the address stored by ring buffer
is contiguous, and the size of every element is equal to the size of
pointer.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Introduce new test for eventfd, which will test it in only basic
scope. The real reason why this is introduced is to have a test with
minimal set of configuration dependencies, such as disabled
pthreads (compared to full tests/posix/eventfd/ variant). This allows to
test eventfd mechanism with both POSIX_API=n and POSIX_API=y.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The test takes ~175s to end on nrf5284dk_nrf52840 and was failing
due to too short default timeout (60s).
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
for RT series CONFIG_NOCACHE_MEMORY need enabled
for Kinetis series CONFIG_DMA_TEST_SLOT_START for test
modify the target and dest alignment
frdmk64f need replace strlen to sizeof in irq callback
clean the unused receive buffer, so output is tidy
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Update compile.sh and added test_script, so that
bsim_test_advx bsim_test application is built and run in
CI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit is a followup to PR #25808 which updates the tests to
ensure the REQUIRED keyword is also used for the ZephyrUnitest package.
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
add new test cases to illustrate the zephyr OS
support an array of atomic variables, each bit
of which can be modified.
Signed-off-by: Ying ming <mingx.ying@intel.com>
Added separator (e.g. comma or semicolon) parameter to FOR_EACH_ family.
Separator is added between macro execution for each argument and not at
the end.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixed occasional test failures when clock was not ready after
specified time.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Test fails on this one platform, to unblock other changes, skip the test
while the issues is being looked at. This test never ran on this
platform before due to ram restrictions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
rename boot_delay function name for clarity and change doxygen group to
be more generic and part of the init group.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove all ram restrictions in kernel tests and revisit all tests and
try to make them pass on all platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reason is that some tests have poor description in Doxygen tags,
decided to fix that situation in some tests which I understand.
Also remove small misprints from some parts of code.
Update Doxygen tags for the next tests:
test_access_kobject_without_init_access
test_thread_without_kobject_permission
test_bad_syscall
test_syscall_invalid_kobject
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The converted target value for remaining ticks was increased by one to
match original code, which used a one-sided test. The current test is
two-sided, so that increment is already present in the allowed 1 tick
error for boards with no slew, and incorporating it into the absolute
error can cause the test to fail.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
