Added in commit 2b5b7da9f3 ("subsys: disk: Add support for multiple disk
interfaces"), then never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The CONFIG_* prefix was missing, making the #ifdef always false.
Found with a script (CONFIG_BT_SETTINGS_USE_PRINTK was unused).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix GATT buffer leak when bt_att_send returns error the allocated
buffer is never freed. Discovered case where the link was disconnected
during the function call, so when GATT checkd the link was still
connected, but ATT checkd the link was disconnected.
Fixes: #19889
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added in commit 1475402d41 ("Bluetooth: controller: Introduce ULL LLL
architecture"), then never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
LWM2M_FIRMWARE_UPDATE_PULL_LOCAL_PORT is unused since commit 54c10c04e5
("net: lwm2m: use security data for connections").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit 08f0d93cbb ("shell: Improve handling of log
messages").
Discovered with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit d1cb39e7ce ("net: lwm2m: migrate LwM2M library to
BSD-sockets API").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Key overwrite feature allows to overwrite old pairing key
records when key storage is full and a new pairing request occurs,
or new keys are distributed. If enabled when key storage is full and
a keys storage slot is requested, the oldest keys added will be
removed. So new devices can be paired with no limitations and no need
to determine, which devices should be unpaired to free key storage
space explicitly in application. To enable the feature set
CONFIG_BT_KEYS_OVERWRITE_OLDEST=y.
Oldest keys are determined by minimum value of up-counting aging
counter. If you set CONFIG_BT_KEYS_SAVE_AGING_COUNTER_ON_PAIRING=y
aging counter values will be updated each time the secure connection
is established. This might increase flash wear out if at least two
secure connections are established and shut down periodically. When
the option disabled aging counter is still updated on each new secure
connection, but not stored to flash.
Signed-off-by: Sergiy Nikolayenko <sergiy_nikolayenko@jabil.com>
Remove the
# Omit prompt to signify a "hidden" option
comments that appear on some symbols. They seem to have been copy-pasted
at random, as there are lots of promptless symbols that don't have them
(that's confusing in itself, because it might give the idea that the
ones with comments are special in some way).
I suspect those comments wouldn't have helped me much if I didn't know
Kconfig either. There's a lot more Kconfig documentation now too, e.g.
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Keep some comments that give more information than the symbol having no
prompt.
Also do some minor drive-by cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The earlier code was always queuing the FIN that is sent when
connection is closed. This caused long delay (200 ms) before the peer at
the other end noticed that the connection was actually closed.
Now check if there is nothing in the queue, then send the FIN
immediately. If there is some data in the queue, flush it when a valid
ack has been received.
Fixes#19678
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The 16-bit format group addresses will be stored,
but we don't store (or restore) the virtual label UUIDs,
i.e. after a power cycle the 16-bit group addresses
would be meaningless.
Fixes#19342
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Add public API function to get the connection handle of the connection.
The connection handle is needed by applications that intend to send
vendor specific commands for a given connection.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Commit ad28c2d6 introduced semaphore on which logger thread
pends. It is possible that log messages are created before
any backend is attached. In that case, logger thread pends
on semaphore with pending log messages and is not waken up
unless new log messages comes.
Fixed by setting semaphore when first backend is attached.
This wakes up logger thread and log messages can be processed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add pre-empt timer stop when a prepare is executed so that
when the pipeline has another event queued, the firing of
the pre-empt timer does not pre-empt the just executed
prepare.
Relates to #19685.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
With `CONFIG_NET_NATIVE`, offloaded drivers can specify capabilites with
`NET_IPV4/6` configs, so there is no longer need to handle socket
offloading separately.
Also, initialize hints structure with zeros, as according to man pages
unused fields should be set to 0:
`All the other fields in the structure pointed to by hints must contain
either 0 or a NULL pointer, as appropriate.`
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new config option `LWM2M_DNS_SUPPORT` to the LWM2M library, instead
of relying on `DNS_RESOLVER` which is only compatible with native
network stack. This allows to use DNS with offloaded interfaces
seamlessly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is related to commit 1a6f4a6368 ("net: tcp: Accept
connections only in LISTENING state") which made the system
to only accept new connections if the application had called
accept(). Unfortunately the TLS accept was not fixed by that
commit so we were in wrong state when accepting TLS sockets.
This commit fixes that issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix incorrectly calculated ticks slots for a connection on
connection update. The reservation incorrectly included the
prepare offset.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix bug in bt_gatt_attr_next when given an attribute that has static
allocation. The handle is then 0 and the function would always return
the attribute with handle 1.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix compilation issue when wanting to use whitelist in bluetooth
applications that does not have CONFIG_BT_CENTRAL defined.
These functions are useful even for broadcaster and observer roles.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add public API function in GATT to check if a specific connection has
subscribed to the given attribute.
Without this function the application has to keep track of which
connections has subscribed using the callbacks from BT_GATT_CCC_MANAGED
since the cfg_changed callback of the CCC doesn't carry connection
context.
The other alternative is for the application to parse the information
in the struct _bt_gatt_ccc object. Although this object has structure
information available to the application the structure is marked as
internal, so the application shouldn't rely on this definition.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix Data Length Procedure to use Feature Exchange values to
send correct parameters based on whether Coded PHY is
supported by remote peer.
Relates to BT TS.5.1.1 tests:
LL/CON/MAS/BV-129-C
LL/CON/MAS/BV-130-C
LL/CON/SLA/BV-132-C
LL/CON/SLA/BV-133-C
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for persisted Service Changed data, to fix the case of a
paired device not reconnecting before a reboot and thus not receiving
SC indication. It also enables support for GATT database being changed
during a firmware update.
Move Service Changed data outside of the CCC struct and make it
persistent by adding support for a bt/sc/... setting.
Signed-off-by: François Delawarde <fnde@oticon.com>
The Service Changed characteristic support should also work when the
GATT database has been modified after reboot (firmware update scenario)
This commit introduces a BT_GATT_SERVICE_CHANGED config option that is
independent from BT_GATT_CACHING and BT_GATT_DYNAMIC_DB.
Signed-off-by: François Delawarde <fnde@oticon.com>
A socket-offloaded interface should bypass interface initialization in
the same way as net-offloaded interface does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Default behavior is to include __FILE__ info with all of the Zephyr
assert macros, __ASSERT, __ASSERT_NO_MSG and __ASSERT_LOC. Setting the
ASSERT_NO_FILE_INFO kconfig option, replaces the __FILE__ with an
empty string, thus removing the file information from the asserts.
The intention here is to allow for code space limited devices to run
with asserts enabled.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This function will be useful in shell when we want to monitor
the amount of bytes transferred and want to clear earlier
statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about how long network packets took from
application to the network device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
application to the network device driver. The data is calculated
for all network packets and not just for UDP or TCP ones like in
RX statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about how long network packets took from
network device driver to the application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
network device driver to the application. The data is only
calculated for UDP and TCP network packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds a possibility to activate duplicates filtering
during direct loading.
JIRA: NCSDK-3017
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
This commit adds a possibility to activate duplicates filtering
during direct loading.
JIRA: NCSDK-3017
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Rx nodes are reserved during control procedures for
generation of HCI event on completion. Fix the allocation
and reservation in the form of a linked list per connection
context. Worst case, this list will hold one rx node for
overlapping non-instant control procedure (Data Length
Update) plus two rx node for control procedure with instant
(PHY update with Data Length Update support).
Fixes#19198.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Send a Echo-Reply to every Echo-Request. This code does not verify
if the ppp stm is in LCP Opened state. See rfc1661 section 5.8.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
The hexdump was earlier printed using 8 bytes in one line like this
[00:00:00.131,143] <wrn> sample_instance.inst2: Example of hexdump:
01 02 03 04 05 06 07 08 |........
09 0a 0b 0c 0d 0e 0f 10 |........
11 12 13 14 15 16 17 18 |........
19 1a 1b 1c 1d 1e 1f 20 |.......
21 22 |!"
This is not utilizing the width of the output best way possible.
Better utilization of the output is to print 16 bytes in one line
like this:
[00:00:00.131,136] <wrn> sample_instance.inst2: Example of hexdump:
01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 10 |........ ........
11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 |........ .......
21 22 |!"
In order to make it easier to find / calculate the bytes in the
output, print the output bytes in 8 byte groups.
This has the benefit that it is easier to map the Zephyr hex output
to Wireshark output which prints the bytes like this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The remote version information event needs to be processed by the
prio_recv_thread() thread in order to unblock the Host RX thread
(effectively hci_driver's recv_thread()) when it blocks waiting for a
response to a remote version information.
Add the same time gate the inclusion of the feature behind a new Kconfig
option: CONFIG_BT_REMOTE_INFO.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to distinguish between connection-related events
that are generated by the controller and others genrated by LL control
procedures, introduce a new class for LLCP.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Cache the result of calling hci_get_class() to avoid repeatedly invoking
it on the same data. In order to cache it we take advantage of the fact
that both radio_pdu_node_rx_hdr and node_rx_hdr are not packed
structures and they currently have a spare padding byte (between type
and handle).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Hide the details of obtaining a pointer to the PDU data from a node_rx
structure to simplify the code.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Call LLL reset functions when calling ll_reset to avoid carrying LLL
state across HCI resets. Respective functions already exist in LLL but
had not been called from anywhere.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Unless explicitly blacklisted, the Proxy node will forward all messages
for the ALL_NODES address to the GATT proxy client.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Fix missing generation of data length update HCI event when
effective tx and rx timings change due to PHY update
procedure.
Fixes BT LL TS 5.1.0 test:
LL/CON/MAS/BV-52-C [Master Receiving Data, LE Coded, CI
Change]
Relates to #17097.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
