range_map() now doesn't implicitly hold x86_mmu_lock, allowing
callers to use it if the lock is already held.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Provide the necessary adjustments to get MSI-X working (with or without
Intel VT-D).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is part of Intel VT-D and how to discover capabilities, base
addresses and so on in order to start taking advantage from it.
There is a lot to get from there, but currently we are interested only
by getting the remapping hardware base address. And more specifically
for interrupt remapping usage.
There might be more than one of such hardware so the exposed function is
made to retrieve all of them.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be used by MSI multi-vector implementation to connect the irq
and the vector prior to allocation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ARM64 is currently using SP_ELx as stack pointer for kernel and threads
because everything is running in EL1. If support for EL0 is required, it
is necessary to switch to use SP_EL0 instead, that is the only stack
pointer that can be accessed at all exception levels by threads.
While it is not required to keep using SP_EL0 also during the
exceptions, the current code implementation makes it easier to use the
same stack pointer as the one used by threads also during the
exceptions.
This patch moves the code from using SP_ELx to SP_EL0 and fill in the
missing entries in the vector table.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This change adds full shared floating point support for the SPARC
architecture.
All SPARC floating point registers are scratch registers with respect
to function call boundaries. That means we only have to save floating
point registers when switching threads in ISR. The registers are
stored to the corresponding thread stack.
FPU is disabled when calling ISR. Any attempt to use FPU in ISR
will generate the fp_disabled trap which causes Zephyr fatal error.
- This commit adds no new thread state.
- All FPU contest save/restore is synchronous and lazy FPU context
switch is not implemented.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
With this change we allocate stack space only for the registers we
actually store in the thread interrupt stack frame.
Furthermore, no function is called on with the interrupt context save
frame %sp so no full frame is needed here. ABI functions are called
later in the interrupt trap handler, but that is after the dedicated
interrupt stack has been installed.
This saves 96 bytes of stack space for each interrupted context.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
The input registers (i0..i7) are not modified by the interrupt trap
handler and are preserved by function calls. So we do not need to
store them in the interrupt stack frame.
This saves 48 bytes of stack space for each interrupted context,
and eliminates 4 double word stores and 4 double word loads.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This is important for when we will need to atomically
un-map a page and get its dirty state before the un-mapping
completed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On Cortex M7, we need to check the optional presence of
Lock Access Register (LAR) which is indicated in
Lock Status Register (LSR).
When present, a special access token must be written to unlock DWT
registers.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
The 2K alignment assembler directives should be under
'SECTION_SUBSEC_FUNC(exc_vector_table,_vector_table_section,_vector_table)'
Otherwise the _vector_table is actually 0x80 bytes aligned.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Most of kernel files where declaring os module without providing
log level. Because of that default log level was used instead of
CONFIG_KERNEL_LOG_LEVEL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
According to the PRMs of both ARC EM & ARC HS families on entry
to Fast IRQ handler ARC hardware saves PC (Program Counter) value
of where processor was right before jumping to the IRQ handler into
2 registers: ILINK & ERET.
But it turned out in case of ARC HS (at least in configuration with
Fast IRQs & 1 register bank) only ILINK was populated with the
previous PC, while in Zephyr we relied on what we read out of ERET.
That lead to funny issues when CPU returned from IRQ handling
to some unexpected location.
And now with that precious knowledge we're switching to return
address recovery from ILINK so that with both families of ARC
processors (EM & HS) we may get reliably good results.
The wrapper is few cycles shorter/faster as well, as we may shave off
another extra instruction for transferring ERET value from its AUX reg
to a scratch core register to be later stored in the memory.
+----+---------------+---------------+--------------+
| | FIRQ | RIRQ | RIRQ(Secure) |
+----+---------------+---------------+--------------+
| HS | ILINK=PC | ILINK=PC | NULL |
+----+---------------+---------------+--------------+
| EM | ILINK=ERET=PC | ILINK=ERET=PC | ILINK=PC |
+----+---------------+---------------+--------------+
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Handle the difference of GNU & MWDT assembly for ARC-specific
code guarded by CONFIG_SMP define. That fixies SMP platforms build
with MWDT toolchain.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
currently pcie_get_mbar only returns the physical address.
This changes the function to return the size of the mbar and
the flags (IO Bar vs MEM BAR).
Signed-off-by: Maximilian Bachmann <m.bachmann@acontis.com>
Adds a new CONFIG_MPU which is set if an MPU is enabled. This
is a menuconfig will some MPU-specific options moved
under it.
MEMORY_PROTECTION and SRAM_REGION_PERMISSIONS have been merged.
This configuration depends on an MMU or MPU. The protection
test is updated accordingly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_mem_partition is part of the CONFIG_USERSPACE abstraction,
but some older MPU code was depending on it even if user mode
isn't enabled. Use a new structure z_arm_mpu_partition instead,
which will insulate this code from any changes to the core
kernel definition of k_mem_partition.
The logic in z_arm_configure_dynamic_mpu_regions has been
adjusted to copy the necessary information out of the
memory domain instead of passing the addresses of the domain
structures directly to the lower-level MPU code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit implements the architecture specific parts for the
Zephyr tracing subsystem on SPARC and LEON3. It does so by calling
sys_trace_isr_enter(), sys_trace_isr_exit() and sys_trace_idle().
The logic for the ISR tracing is:
1. switch to interrupt stack
2. *call sys_trace_isr_enter()* if CONFIG_TRACING_ISR
3. call the interrupt handler
4. *call sys_trace_isr_exit()* if CONFIG_TRACING_ISR
5. switch back to thread stack
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Every time I try to decode all the defines in this driver what I get is
only a huge headache. This patch:
- adds a few sensible comments
- remove the redundant defines
- rename the defines to be more self-explanatory
- reorder the defines
- try to make sense of some mysterious derived values
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
As done already for other structs, use the macro-generated offsets when
referencing register in the ESF.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The init_stack_frame is the same as the the ESF. No need to have two
separate structs. Consolidate everything into one single struct and make
register entries explicit.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Use GEN_OFFSET_SYM macro to genarate absolute symbols for the
_callee_saved struct and use these new symbols in the assembly code.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
For some kind of faults we want to be able to put in action some
corrective actions and keep executing the code.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Make the printing of errors a bit more descriptive and print the FAR_ELn
register only when strictly required.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Each vector table entry has 128-bytes to host the vector code. This is
not always enough and in general it's better to branch to the actual
exception handler elsewhere in memory.
Move the SError entry to a branched code.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch. Register g7 is
used to point to the thread data. Thread data is accessed with negative
offsets from g7.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
SPARC is an open and royalty free processor architecture.
This commit provides SPARC architecture support to Zephyr. It is
compatible with the SPARC V8 specification and the SPARC ABI and is
independent of processor implementation.
Functionality specific to SPRAC processor implementations should
go in soc/sparc. One example is the LEON3 SOC which is part of this
patch set.
The architecture port is fully SPARC ABI compatible, including trap
handlers and interrupt context.
Number of implemented register windows can be configured.
Some SPARC V8 processors borrow the CASA (compare-and-swap) atomic
instructions from SPARC V9. An option has been defined in the
architecture port to forward the corresponding code-generation option
to the compiler.
Stack size related config options have been defined in sparc/Kconfig
to match the SPARC ABI.
Co-authored-by: Nikolaus Huber <nikolaus.huber.melk@gmail.com>
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
