This introduces bt_gatt_attr_get_handle which can be used to resolve
handles of static attributes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Added macro that helps to declare multi-instance services. The macro
allows to statically define service structure array. Each element of
the array is linked to the service attribute array that is provided
by the user.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Allow the application to add subscription without resubscribing.
This is needed for persistent bonds that can go to deep sleep and
turn of the RAM or power-cycle.
In this case the application as a GATT client must have a way to add
the subscription callbacks back to the stack before the GATT server
sends notifications.
This should preferable be able to be done before even connecting
since the notifications can arrive immediately after connecting to
the peer.
The stack cannot persist this on it's own since it must remember the
function pointers for the callback functions. Storing these in
persistent storage would not be compatible with a Device Firmware
Upgrade (DFU) solution.
Fixes: #21798
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Clarify the note about the lifetime of the subscribe parameters.
The note uses subscribe procedure lifetime, but the parameters
must remain valid after having subscribed as well, until the
subscription is removed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add handling of the HCI_Hardware_Error event to log the hardware code.
This event was unmasked in set_event_mask.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Those APIs are used for deleting appkey, unbinding an application
from SIG model, unbinding an application from vendor model on the
target node, with matching shell command.
Signed-off-by: YanBiao Hao <haoyanbiao@126.com>
Adds a Config Client API for deleting netkeys on the target node, with
matching shell command.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Added a callback that lets an application get write error
(if any) when subscribing to a gatt characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Remove paragraph in documentation of GATT write callback which is
clearly wrong and was meant for the read callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This fixes an error introduced in commit
9b2e9eda89
It seems that in a couple of instances, the "_VAL" suffix was
forgotten. One of these broke the le-audio build.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Add encode utility mocre for 16 and 32 bits UUIDs that can be
used to in combination with BT_DATA_BYTES to include UUIDs
in advertising data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add defines for UUID values so that they can be used without
declaring a full bt_uuid struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Elevate connections always to security mode 1 level 4 when
Secure Connections Only Mode has been enabled in the Security Manager.
Elevate connections always to security mode 1 level 3 when
Legacy pairing with OOB only has been enabled in the Security Manager.
Fixes: #27338
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added a #define for the maximum attribute length defined
by the core spec. Usefull for GATT servers and clients that
deals with long values.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Core 5.2, Vol 4, Part E, section 5.3.1 clarifies that advertising set
handle is assigned by host when advertising set is created and this
happens only on LE Set Extended Advertising Parameters.
An advertising set handle is an arbitrary number within allowed range,
i.e. 0x00-0xEF and not 0..max_supported-1.
This patch adds option to enable advertising set handle mapping from
HCI range as defined by Core specification to zero-based handles used
by LL. If enabled, HCI handle will be remapped to LL handle for each
command, otherwise HCI handle will be used as an LL handle. The latter
effectively skips mapping logic and should be used with Zephyr host
which uses zero based indexes.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Added support for syncing to periodic advetisements.
The API and usage is heavily inspired by the extended advertisement
and connection APIs.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added the ext adv report interval to bt_le_scan_recv_info which
denotes whether or not there is periodic advertisement data
associated with the advertisement report.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added API to set periodic adv parameters, periodic adv data
and to enable/disable periodic advertisement.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Document the behavior of bt_le_ext_adv_set_data ignoring either
advertising or scan response data when the configuration does
not support this type of data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Document need to register services that are always registered as dynamic
services with CCCs loaded from settings.
These services must be registered before calling settings_load.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a high-level documentation page for the Bluetooth Mesh Shell
subsystem, documenting all available commands and their parameters.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Added a feature that allows an application to request
automatic discovery of the CCCD handle when subscriping
to a characteristic. In order to preserver RAM, the application
is expected to provide the discovery parameters, and it's up
to the application whether or not it wants to reuse the
discovery parameters or use one for each characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Add bond_deleted callback so that the application can keep track
of when bond information is deleted in the stack.
Bond information can be deleted by the application through bt_unpair
or automatically by the stack in some cases, e.g when
CONFIG_BT_KEYS_OVERWRITE_OLDEST is enabled and the oldest bond
is overwritten.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Include the files that provide the types and macros used by the
header. Ensure that all declarations use C language linkage when
included from a file using C++.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
C99 designated array initializers are not part of the C++ language,
and are not supported in GNU G++. Replace their use with invocations
of the Zephyr listify macro utility, with ancillary helper functions.
Also fix the initialization order to match declaration order (which
C++ also requires).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
C++ requires that designated initializers be provided in declaration
order. Fix the macros that violate this requirement.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add options for phy update procedure. User can now set no preference
option for a particular PHY as well as preference for LE Coded PHY
coding scheme.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Previous mode store function only can store single data,
change this to store as KV model, let's app-layer to manager
model data, other than by stack when node reset.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
User and implementation code may change the uuid pointer stored in
discover and gatt_read parameter structures, but it should never
mutate the pointed-to-value. Add a const qualifer so UUIDs stored in
flash can be referenced.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The indicate callback does not provide a return value. The read
callback didn't document its return values.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Adds propagation of error returns from the model init callbacks in
Access, and removing any other checks for successful init in the
foundation models.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add application control of initiating phy change procedure and it's
parameters.
The reasons for allowing the application control over the PHY:
- Allow changing to Coded PHY.
- Application may change PHY to react to changes in environment
to balance throughput and range.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating data length procedure and it's
parameters.
The reasons for allowing the application control over the data length:
- Bandwidth control adjusted based on number of active connections.
- Changing data length before switching to coded phy.
- Applying workarounds for interoperability problems.
- Controlling order of ATT MTU and data length procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The Bluetooth 5.2 specification was recently released, and has a new
version identifier (11) assigned to it in the Bluetooth Assigned
Numbers.
Relates to commit fa241f0249 ("bluetooth: Add decoding for BLE 5.2
version string")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
