This simply copies the PIC disabling code from ia32 into ia32_pci.
Change-Id: Ib48cb96d3f0ba7356431ce1b2221f3f346e61c8d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
ns16550 was the only driver using those, and now that it properly uses
sys_io.h functions we can remove inByte and ouByte from ia32's board.h
files.
Change-Id: Id2a691b8ecf43baacd64bc9be09feb15ef9eb339
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only 1 port is available on Quark through the PCI bus.
Change-Id: Ie0e0173686947134d2553dd0fd0230ffa5a1d456
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Initial import of Synopsis DesignWare I2C driver functionality
for the Zephyr Project. This import has been tested for host
master control. While it does contain the code to work as a host
slave, this code has not yet been completely tested and validated.
Change-Id: I3df0214f6e3b6798f7dad4819d09c3ec5998e508
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This will initialize the UART console port at an earlier stage than
usual in order to get early debugging outputs.
Change-Id: Ica90fe3481687ef20488b59f6d554a8af1d22559
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Device ID was wrong
- Setting default class id
Change-Id: I9fd1df284eca4067c21beffa7599307a40be5144
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This way, it will be possible to use Galileo and it's UART ports without
PCI_ENUMERATION set.
Change-Id: I9498aca818b128a6ee69fde21aa5c4b9cd6bc1ad
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The option is being referended by the same file
but is not being defined anywhere.
Change-Id: I5e0ec4c29cba773a5256bae52190a117fcc12bf3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was messed up due to lack of arc platform to test.
Change-Id: I5abda172dddf54532c1bcb66f36d02db7f7d7ff4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The top level Kbuild file builds the objects and generates
offsets.h using the gen_offset_header tool.
Change-Id: I24569572085d40547e893942203233f4aa647fac
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put architecture option and ARCH_DEFCONFIG on the top
and simplify default options for the architectures.
Change-Id: I4cae73f3e9ec24913e201269ec6dc8eddc2fd7c1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Follow the model of the Linux kernel for adding arch
specific CFLAGS by using the Makefile and Kbuild combination
in the arch/<arch> directory.
This will also allow adding architecture specific targets and is
easy to maintain when alongside the architecture.
Change-Id: If51a78e8845baa71d9090c4a4f49fcd013354840
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Follow similar configuration for other platforms.
Change-Id: I1478d10799cbb375c715bed4d30d1bcf223d282f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
CONFIG_UART_CONSOLE is already checked so this one is not needed.
Change-Id: I557880bd190f4ef0b7e439520991669354bb3b4f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
[DL: captilize commit message title; fixed some whitespaces;
changed the __initconfig_gpio_* from level 0 to level 1,
which is the level of pure_init; and added include path
to board.h; ]
Change-Id: I7eea6a6ca9e4b7cf8d1ccabb57f07f786da93ef0
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
- Makes the code simpler in driver side
- Configuration is done on platform's config.c file and not the driver
- Handles CONFIG_PCI_ENUMERATION setting
Change-Id: I9b8376cebd7e0b62279251da132a2c4ee7b2e148
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Without it, it won't go through a pci scan, and will just trust the
pre-set information for the bus/dev/function to enable the memory
mapped registers.
Change-Id: Ica9156be541619dce9684dd45f70e05b69782a7c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This option will be used to disable PCI enumeration (not PCI bus) to
gain in code size and execution as long as driver will be properly
configured statically. Thus setting this option as set by default.
Change-Id: I7da5d154c8ee89e44fc2bad8e85a5a20f498927e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Rename field 'Args' of the struct:
- 'k_proc' in the file include/microkernel/base_api.h
- 'k_args' in the file kernel/microkernel/include/micro_private_types.h
Change-Id: I5847a2f1e9c7dd34dea37857b4fadeb37ced489b
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Group' of the struct:
- 'k_proc' in the file include/microkernel/base_api.h
Change-Id: I0d83ec7e82c67a7c2c37df8bb0a5d83b2109a8ed
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Rename field 'Ident' of the struct:
- 'k_proc' in the file include/microkernel/base_api.h
Change-Id: Iec787e0a8aa1791c968b371017cf96211a60cef1
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Such controllers are found in Quark's X1000 series, and thus are found
on Galileo boards v1 and v2.
Change-Id: Ib71486c9f27de1b6c48ce3cb3dd138d69833c2ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will be useful for PCI based drivers to integrate fully within
the device driver model, where they will have to provide the function
they are found.
Change-Id: I7d64a4c6727cee52cbcb743c859cda43ac1a853b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add the sleep events point for x86 and ARM arquitectures that gives
information about when the CPU went to sleep mode, when it woke up
and which interrupt causes the CPU to awake.
Change-Id: Iaa06a678eab661357d084ee1f79c4cfcf19bf85d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add the interrupt profile points for x86 and ARM arquitectures. This
gives information regarding the time when interrupts occur.
Change-Id: Ic876c0e7f9e8819d53e0578416f09146f4456d3d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Added static Console configuration for ia32_pci. IRQ and other
parameters might be received from PCI scanning but that needs to be
reworked with functions like IRQ_CONNECT_STATIC which requires fixed
static interrupt number. When this is fixed we use PCI dynamic
parameters.
Change-Id: I07c07f16fbac8f5de999f9cf8746eea0d453198b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Added static Bluetooth configuration for ia32_pci. IRQ and other
parameters might be received from PCI scanning but that needs to be
reworked with functions like IRQ_CONNECT_STATIC which requires fixed
static interrupt number. When this is fixed we use PCI dynamic
parameters.
Change-Id: Iac0796fd3f78b92237999e40de5c3d563b2bc319
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Also for ARC, rename context_wrapper.S to thread_entry_wrapper.S.
Change-Id: I83318ae352a688996f8436cf3252f6108ec23dc5
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Somewhat useful utility that should only have one implementation, so it
can impede on the normally-available application namespace.
Change-Id: I085850177c231fdf58634f97e897c4d2e1a5cffb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The term 'context' is vague and overloaded. Its usage for 'an execution
context' is now referred as such, in both comments and some APIs' names.
When the execution context can only be a fiber or a task (i.e. not an
ISR), it is referred to as a 'thread', again in comments and everywhere
in the code.
APIs that had their names changed:
- nano_context_id_t is now nano_thread_id_t
- context_self_get() is now sys_thread_self_get()
- context_type_get() is now sys_execution_context_type_get()
- context_custom_data_set/get() are now
sys_thread_custom_data_set/get()
The 'context' prefix namespace does not have to be reserved by the
kernel anymore.
The Context Control Structure (CCS) data structure is now the Thread
Control Structure (TCS):
- struct ccs is now struct tcs
- tCCS is now tTCS
Change-Id: I7526a76c5b01e7c86333078e2d2e77c9feef5364
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
There is no concept of a "process" in the system, so remove last
mentions of that concept from free-form text (doc, comments, macro
parameter names).
Change-Id: Ic1b73371c448ed93b0db46bc9bb412d1e1dbc8bd
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
k_proc was a legacy leftover that does not make any sense, since there
is no concept of a "process" in the system. Rather, that data structure
refers to a 'task control block', i.e. the representation of a task
execution context from the microkernel's point-of-view (not to confuse
with the 'struct ccs', the representation of a thread execution context,
from the nanokernel's point-of-view).
Change-Id: Ic29db565af023be629ce740bbcb652ece7dc359f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This commit fixes an issue with INIT_STACKS configuration option.
k_memset is substituted by the libc memset routine to initialize a
block of memory.
Change-Id: Ic3e286d0976f618110b2828f6da76417b868aef0
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
The Kconfig option SYS_CLOCK_HW_CYCLES_PER_SEC for the basic_atom platform
configuration was mistakenly left at 900000000. That value was necessary
when basic_atom used the LOAPIC_TIMER, but as it now uses the HPET, it must
use 25000000.
Change-Id: If2735895edfe2f67905bf57e4008efbee50084f7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
In order to cover maximum of code, make different platforms
use different driver configuration. This way basic_atom uses
legacy emulation combined with edge-triggered interrupts while
galileo platform uses normal mode combined with level-triggered
interrupts.
Change-Id: Ib80553dbb16cf6bbe61ee5e41788031037f41860
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The initialization procedures need to be called in the
following order:
- basic hardware initialization;
- devices initialization;
- hardware clock initialization, that the kernel needs to
run the kernel server.
This way, the board initialization routines is placed
to the pure_early_init level to make sure it runs first,
all device initialization procedures run at pure_init level,
so they are initialized early enough to be used for debugging
if needed. Hardware clock initialization is placed on
nano_early_init level to make sure hardware clock is initialized
just before the kernel server starts.
Change-Id: Ieecf9f0252c47c621b7208969687dc1113fc2ad0
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The board runs with 120 MHz CPU frequency, the systick
uses CPU frequncy. This way 120MHz is a correct value.
Change-Id: If47f1ce6371fb7202ececb4d5f8f7c984aa66598
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The files idtEnt.h and segselect.h in shared are linked from
the source tree for no good reason adding and extra top level
directory that might be confusing.
The shared/ here means shared between host and target, this is
not longer necessary in our build system.
Change-Id: Id9665e10de7a1d290888d9069be3db9f4330d284
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is just a cosmetic change to unify anything interrupt related
under 'irq'.
Change-Id: Ib8804d194e11eb49526fda952d9efc0f2ffac2df
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the serial driver to be excluded from the build.
Change-Id: I74549b058d85bf35acf9d719643139901ae5973e
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the serial driver to be excluded from the build.
Change-Id: I1be0ee5bc6817ac03ed23dcc9925cff1b694d584
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This allows the serial driver to be excluded from the build.
Change-Id: Ibd65cea07e753de0d452879bfdac8f3a421db5e7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move the baud rate selection for uart_console into Kconfig.
This allows apps to specify custom speed. Default is 115200
which should be supported by almost all RS232 and USB adapters
out in the past few years.
Change-Id: I78649bf2a1b2ddfc90a20d611a6454e3ad3b1b3a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is the final step to convert serial to the new driver model.
The dev->driver_api is now being used by individual drivers.
As a side effect, it is now possible to build multiple serial
drivers in the final image (though it won't make much sense).
Change-Id: I5d864e6503a5431b29006c311320155adf81cf5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This introduces the config option CONFIG_UART_CONSOLE,
and also CONFIG_CONSOLE. The UART console can finally
be disabled if desired.
The defconfigs are also being updated.
Change-Id: I5ebaf6471986deca105971e67fcddb43374de94a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With this, the UART console has its own initialization which is not
dependent on UART init routines.
This will allow the app to utilize all UARTs for other purposes,
instead of always reserving one for console. Future patch
will enable this choice.
Note that the console init is effectively demoted to pure_init
from pure_early_init. The UART console depends on UART being
initialized, but there is no deferred init at this point.
So this initializes the console a bit later than UARTs,
simply to make sure the UART is initialized before using it.
Once there is a mechanism for some type of deferred initialization,
the UART console init can be promoted back to pure_early.
Change-Id: Iba95197b13384cb1a46e34c78638348b7a0bec8c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This restructures the device structs and now utilizes the new
driver initialization model. This is another step towards
converting the serial driver to the new driver model.
Note that the serial driver does not initialize the hardware
unless it is being used by another driver. The configuration
of the serial port needs to be done by the driver utilizing
the port (e.g. baud rate, interrupt priority, etc.).
Therefore, some serial ports are declared but not exactly
configured.
Also note that the UART console is being initialized at
the same time as the serial port. This will be removed
in future patch, so the UART console driver will do
its own initialization.
Change-Id: Idd89954b2d0649a557ba8c869ee96512fec898e4
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This encapsulates the whole serial drivers Kconfig sections, and
allows the whole section to be deactivated.
Change-Id: I84f8d35da74f3c00a44d8c17786ea2297422d68b
Signed-off-by: Daniel Leung <danielcp@gmail.com>
This moves the static device definition from the driver file,
drivers/bluetooth/uart.c, into the platform config files for
each platform.
This is another step towards converting UART drivers to
the new driver model. Also, platform config files are a more
logical place for the definition.
Change-Id: I668a52de5a38005b8b2bcb67d74437ead377cb16
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
... instead of an array index to a global array. This is
an intermediate step to make the drivers conform to
the new driver model.
This only changes from using a direct array index to using
device structs. The UARTs are still staticlly defined.
Later patches will make the drivers utilize the driver
initialization procedure specified by the driver model.
Change-Id: I18041bbb4b0efdf8ae87088fd000b391d0827e9b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The new names reflect better what the functions do: they find the first
bit set starting from the least or most significant bit, i.e. they find
the least or most significant bit set, in a 32-bit word.
Change-Id: I6f0ee4b543f6f37c2f08f7067e14e039c92a6f6a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The inline versions are renamed to remove the _inline suffix, and the
non-inline versions are removed from the code base.
Change-Id: Iee2e6adcfb5da1fe0a978a05aa854e10ae82a8b8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The inline versions are renamed to remove the _inline suffix, and the
non-inline versions are removed from the code base.
Change-Id: I7314b96c42835f15df4c537ec11ab7961d4ee60f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Standardize on using the irq_lock/irq_unlock (non-inline) symbols
everywhere.
The non-inline versions provide absolutely no benefits, so they will be
removed in a subsequent commit, and the inline versions will have their
_inline suffix removed.
Change-Id: Ib0b55f450447366468723e065a60adbadf7067a9
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Align with the newer terminology used for microkernel internal symbols.
Change-Id: I623b383f90d9e37a49429a79774c7f7a4953bd5f
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
irq_handler_set, irq_priority_set and irq_disconnect have been made
private by prepending an underscore to their names:
irq_handler_set -> irq_handler_set
irq_priority_set -> irq_priority_set
irq_disconnect -> irq_disconnect
The prototypes have been removed from header files when possible, and
extern statements used in C code where they were called.
_irq_priority_set() for ARM is still in the header file because
IRQ_CONFIG() relies on it.
Change-Id: I2ad585f8156ff80250f6d9eeca4a249a4477fd9d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the context switch profile point for x86 and ARM arquitectures.
Change-Id: Ib7205059104ed47b96ba75b8cfefec3ff35f6813
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a standardized mechanism to add profiling points to the Kernel
with a single interface for the user to collect the profiling data.
Change-Id: I4fa34ac1b42f73a73ba1fd805e755ee2fd00dff7
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Add a log event tool with a single interface for the user to
add/collect the event log data.
Change-Id: Ia4b78836748c5d7e44ba1bdd50c28434e8a55d65
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
That number is not representing the number of PIC IRQs, but rather the
number of "standard", fixed-number IRQs on a (legacy) x86 PC platform.
Change-Id: I1f0fff4c6d24f1d49764efef93f6e5ca3f181168
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removes the non-PIC disabling PIC code as the PIC is not a supported interrupt
controller. The PIC disabling code remains as it is needed to prevent the
generation of spurious interrupts from the PIC (see CONFIG_SHUTOFF_PIC).
Change-Id: Ic59aa17ab96f34685a5d7b5f24cab391de47edca
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The PIT is an unsupported device. On x86 based platforms, the LOAPIC_TIMER and
HPET_TIMER are the only supported timers.
Change-Id: Ic890838c811b7eb62008aef0c8a92786f1579217
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the LOAPIC and IOAPIC macros from board.h as they are no longer
appropriate since Kconfig options exist to use in their stead.
Change-Id: I2ce41a7a08d1859682389f35cd5a97c0e2cd5bf7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Creating the IOAPIC and LOAPIC Kconfig options permits future commits to remove
those settings from the relevant board.h files.
Change-Id: Ie33c703f39c68d6e251d67b1c7cf75a0dd56a7e6
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the LOAPIC timer macros from board.h as they are no longer required
since appropriate Kconfig options exist to use in their stead.
Change-Id: Id0b509eba7cce1839b400f95b989bf886322e1a8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the basic_minuteia platform configuration to use the HPET timer as both
the PIC and PIT will be removed in a future commit.
Change-Id: Ieefcf48175d6d2731acd6b39a5e73879902940b1
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the HPET timer macros from board.h and uses the HPET timer Kconfig
options in their stead.
Change-Id: Ia0b3cd87716277ac25f12deb31d5c5934f355050
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds additional Kconfig options to the HPET timer for setting its base address,
IRQ, IRQ priority and condition for triggering an interrupt.
Change-Id: I80349c60237380129da9ef41ccf6850c6b874c3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Initializes the HPET timer if it is configured into the system.
Change-Id: Ia9474e868101abe88e031266b956c6a559745d75
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Abstracts the initialization of the following devices:
LOAPIC, IOAPIC, and HPET TIMER
This allows for a more configurable ia32_pci platform.
Change-Id: I05d0d983c163be499dd967ffe0121290a4305c9e
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Converts camel case routine names to lower-case with underscores to comply with
coding practices.
Change-Id: I9fac0d3858389039c00882a7d2e97fcd4e4c812b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The new name corresponds to the platform (ia32_pci), whereas the old name
referred to the old platform/bsp name.
Change-Id: I1b6f3416db146af4fdbadf70d0ab153741c781d5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The new name corresponds to the platform (ia32), whereas the old name referred
to the old platform/bsp name.
Change-Id: Ia8fe5d2b35bceb7e04dd8ac9c41b9de7947ed1f9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
There were some typos and some weird phrasing.
Change-Id: I7b183755058e5ffedca97d434c43f448aafd1926
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The name of the device is SYSTICK. The device name should be part of the
file name, like all other timer drivers we support. The name
'cortex_m_timer' said nothing about which device the driver is for, since
it's way too generic: it could be for any timer present on any Cortex-M
board.
Change-Id: I39b4f79c32516ec9aff82c55c0ca639fad1b52bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This change removes the internal number-to-function mapping
of microkernel services. Instead, function pointers are used
to specify which service to use.
This is in preparation for private kernel objects. Before this,
only kernel objects that are defined in MDEF files would have
corresponding functions included in the final binary, via sysgen
by populating an array of number-to-function mapping. This
causes an issue when a certain type of objects are all defined
with source code, and never in MDEF file. The corresponding
mapping would be deleted, and the functions are never included
in the binary. For example, if no mutexes are defined in MDEF
file, the _k_mutex_*() functions would not be included.
With this change, any usage of private kernel objects will hint
to the linker that those functions are needed, and should not be
removed from final binary.
Change-Id: If48864abcd6471bcb7964ec00fe668bcabe3239b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Renames the menu to "Processor Capabilities" as it is both more concise and
it gives a more "consistent feel" to the menu names (referring to the platform
equivalent "Platform Capabilities".)
Change-Id: I1f835e11e382f811720c17e194b4bf410ef74d31
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Reduces redundancy in the x86 Kconfig menus.
Change-Id: I90ff7d6aedda2aa02528b6821eeaf7eb6bea321c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Kconfig option PROT_MODE_SWITCH_PROMPT was being used to conditionally
display the "Boot Sequence Options" Kconfig menu. It is simpler to include
both PROT_MODE_SWITCH and its dependent BOOT_A20_ENABLE in the parent menu.
However, doing so necessitates that the name of the parent menu be changed
from "Bootloader Options" to "Boot Options".
Change-Id: I9b9a074a0d4ec5209f5349b42178409c73875b00
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Changes the order of the floating point options so that the SSE Kconfig options
are not interspersed with the floating point options.
Change-Id: I8390b5049f95b3088e7abf48bf492a544e7f5f50
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
It makes more sense to have the x86 Kconfig options CPU_FLOAT_UNSUPPORTED
and CPU_SSE_UNSUPPORTED to be selected by the CPU than have those options
dependent upon the selected CPU.
Change-Id: I862baabee6a81cc79206c37a50b8594354a40403
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
There is no need for any x86 Kconfig to have a dependency upon the following
Kconfig options as they are always true when building for ARCH=x86.
X86_32
ISA_IA32
ARCH="x86"
Change-Id: I810e9712589199871953f043e8be746ab03230f8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Uses tabs instead of spaces for consistency.
Change-Id: Ic85b710dc7f667f9b28b97839f020921afe13f3f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Kconfig option HARDWARE_BP_SUPPORTED is not used.
Change-Id: Ifed886f733e8125ef1c45926e46e31ff48d06316
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The top-level menus "x86 Core Options" and "Bus Options (PCI etc.)" are now
sub-menus to the the top-level menu "General Platform Configurations".
Also, the "Board Capabilities" sub-menu has been hoisted out of the
"x86 Core Options" menu and placed as a renamed sub-menu
(Platform Capabilities) to the top-level "General Platform Configurations"
menu.
This helps to create a more logical flow when using "make menuconfig".
Change-Id: I3a837b039eb735ec4073a1721f00753705fba020
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes up the summary lines in the "Board Capabilities" menu so that the
descriptions are more consistent with each other as well as their option names.
Change-Id: I6a030af702340c5ef634217ff6d4bfd046ed24c5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Combines the following Kconfig options to create PLATFORM_IA32:
PLATFORM_GENERIC_PC
PLATFORM_PCMINUTEIA
PLATFORM_ATOM_N28XX
The new name aligns with the 'arch/x86/platforms/ia32' platform directory.
Change-Id: I4474cb43040f888d5164382184c27bbb38527440
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
1. The new name aligns with the 'arch/x86/platforms/ia32_pci' platform
directory.
2. A shorter prompt works better with menuconfig.
3. Removes IOAPIC selection as HPET_TIMER selection makes it implicit.
4. Removes LINK_AUX_COMPILER_LIBS selection as it does not exist.
5. Removes CPU_MINUTEIA selection to permit CPU_ATOM as a valid choice.
Change-Id: I55694d2594a103f4f5ca233c279df0556ff1327f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the default platform configuration files as they had not been properly
maintained.
Change-Id: I5f554c287af51f4d7dcf224b7816f40d14c576d4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This commit removes the FP_SHARING and AUTOMATIC_FP_ENABLING
Kconfig symbols.
This Kconfig symbols were defined in arch/x86/Kconfig and
arc/x86/core/Kconfig as well.
Change-Id: I2ed19c32dbb8e16935343b71fb2c2739228e9fb2
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit removes the ADVANCED_IDLE and ADV_IDLE_STACK_SIZE
Kconfig symbols.
This Kconfig symbols were defined in arch/x86/Kconfig and
kernel/microkernel/Kconfig as well.
Change-Id: I17cc28cdf6f07c8a85acad7318b2b4ce6a06f4bc
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Removes references to obsolete BSP terminology. Where appropriate, replaces it
with platform terminology.
Change-Id: I41fc099844d137dd0ea87cce0f675dc6f022ad40
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes references to obsolete BSP terminology. Where appropriate, replaces it
with platform terminology.
Change-Id: I26c199c50fefc9729ec07c48083bedc86890cc89
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Replaces references to obsolete BSP terminology with platform.
Change-Id: Ibd083558bbbb08a16a68d58251774fb4c84cbbf8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Kconfig option SW_ISR_TABLE_BSP is not used anymore.
Change-Id: Ifc1be395f5ed7e5d1072a783d800385e69fbc4dc
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add to the configuration that HPET timer legacy emulation
mode is not used, as hardware does not support it.
Change-Id: I51175a0ce8f06c9c38a3fc36f9723e431fc72dd6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to work reliably on QEMU and not depend on the
host CPU frequency change basic_atom configuration to use HPET.
Change-Id: I1253a0224bcbff4a7d54406b089c29b5ace32080
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The configuration of SRAM and flash options are no longer hardcoded in the
platform's linker script file, but are instead defined in the platform
configuration file.
Change-Id: I557a8228080d607f6add5f86b9b2509ed3fd31ce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds Kconfig options for specifying the following platform attributes:
SRAM size
SRAM base address
Flash size
Flash base address
This will allow them to be hoisted out of the platform's linker script file
in a later commit.
Change-Id: I09ba5c09d8f34eea5d787c669d77d27d4389d824
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The Cortex-M related Kconfig menus and options no longer show up at the top
level when "make ARCH=arm menuconfig" is issued. They show up under the
"General Platform Configuration" menu.
Change-Id: I6bf012e628212340f5e089d0193a9a71d90c79b9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Eliminates bsp directory as part of transforming BSPs to platforms.
Change-Id: I8b5366bf32797ddbb1bfa3520ddfeed6344cec2f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes whitespace issues found by checkpatch.
Change-Id: I0bfa6721dcf2d6c0413b4ca39d3c5ea98631b96d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The basic_atom uses the LOAPIC timer, which means that the proper value for
SYS_CLOCK_HW_CYCLES_PER_SEC is dependent upon the hardware. Although the
proper value for the atom_n28xx hardware is 150000000, that value does not
necessarily play well with QEMU and the host development platform as it has
been observed on many development boxes to result in a real tick frequency
that is too high.
It is recognized that the developer's host platform can not be controlled for
and that the new value of 900000000 will not be ideal for all systems. Pending
further feedback, it should be an improvement over the previous.
Change-Id: Ibe4e1ad91d3b3ae090893ff3dc855b4343972e24
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes the SYS_CLOCK_HW_CYCLES_PER_SEC Kconfig option dependencies such that
it can be overridden by a modified platform configuration file. This is
particularly important for the LOAPIC timer driver as
SYS_CLOCK_HW_CYCLES_PER_SEC is dependent upon the target's CPU/bus frequency.
Change-Id: I0fb49b4c540888cb1988c76e2a711a85e756f82c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Moves the source files from arch/x86/ to arch/x86/core/ as part of transforming
BSPs to platforms.
Change-Id: I0ef6622762cda8ce201944fd87f2ee8f73e3e511
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the timer driver dependencies to simplify the selection of a timer
driver. The timer driver menu only lists those drivers that are compatible
with the previously selected interrupt controller.
Change-Id: I5deea315f7c373c6660bacc411c6374e7b0ae84d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Selection of the IOAPIC requires that the LOAPIC be previously selected.
Change-Id: I13d95d4bb4ff02c1aebb0b5e573cb2b89dbe530b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The LOAPIC_TIMER_FREQ Kconfig option is not used.
Change-Id: I919fd2128f667e0b91467cb542041449738dd992
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
include nanokernel.h and misc/util.h
Those are needed after the restructuring and changes done
to public APIs.
Change-Id: Icbb1d182419e793afe7a74b14af1f31180967f39
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changes the the names of the x86 platforms so that they are more generic.
generic_pc -> ia32
quark -> ia32_pci
NOTE: it is expected that the two platforms will eventually be merged into one.
one. At present, the two platforms support different hardware. For example,
the ia32 supports bluetooth whereas the ia32_pci does not, and the ia32_pci
supports both PCI and HPET whereas the ia32 does not.
Change-Id: I8a980aaef55be8c59f7d19ddeb7fafbf11253408
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames supported platform configurations to conform to new platform
configuration naming scheme.
Example usage with PLATFORM_CONFIG:
make PLATFORM_CONFIG=basic_cortex_m3
make PLATFORM_CONFIG=basic_atom
make PLATFORM_CONFIG=basic_minuteia
make PLATFORM_CONFIG=galileo
xxx_ti_lm3s6965_defconfig -> xxx_basic_cortex_m3_defconfig
xxx_generic_pc_atom_n28xx_defconfig -> xxx_basic_atom_defconfig
xxx_generic_pc_minuteia_defconfig -> xxx_basic_minuteia_defconfig
xxx_quark_defconfig -> xxx_galileo_defconfig
Change-Id: I696eb8b9ad9a72d7a72efbe1341ce23500335764
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This option was remove as part of linker script cleanup
a few months ago.
Change-Id: If04d69096eb3ef682d72258be90bf710ed931e69
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes CONFIG_CPU_PENTIUM4 and CONFIG_PLATFORM_PENTIUM4 as Zephyr does not
support the Pentium4.
Change-Id: Ieb1970894eda184f4c33d03e3563fb08f861ec6c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the generic_pc and generic_pc_pentium4 platform configuration files
as Zephyr will not support them.
Change-Id: Iffa917d8e31702e6280eca3cbc9cdaf3f8ed9c98
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates Kconfig option names as part of transforming BSPs to platforms.
Change-Id: If397bcac8b058e5700e82c3cabbfe64588316d1d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
As a step towards eliminating the ARM's bsp subdirectory (as has already been
done for the x86 arch), the contents of 'arch/arm/bsp/Kconfig' have been merged
into 'arch/arm/Kconfig'.
Change-Id: I813b5c9e19187347147875635deb851a3357dd55
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
One of many steps in the transform BSPs to platforms work item. At the end
of this work item, there should not be any code in the 'arch/arc' directory.
Change-Id: If72a6a858eb4b0f1521191fca441bed4acc6d8ce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
One of many steps in the transforming BSPs to platforms work item. At the end
of this work item, there should not be any code in the 'arch/x86' directory.
Change-Id: I78bf1738f4450faa078a8510ab342eb9d9277b91
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
