This commit replaces exact time compassion by a range check, allowing
the tests to pass on platforms which needs rounding in __ticks_to_ms()
and _ms_to_ticks().
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The test read_kobject_user_pipe() is called twice in
the test suite. There is no need of calling same test
twice. Removing the extra call.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
This adds two test cases to create dynamic threads, and one test
case to make sure permissions are set correctly.
Origin: Original
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The kernel.queue.poll test fails if CONFIG_MAX_THREAD_BYTES is larger
than 2, complaining about no memory for semaphore object. Turns out
the memory pool is not large enough. So make it a bit larger.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add descriptions and doxygen groups for app_memory,
stack_protection, stack_randomization and
obj_validation.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Test that we can define our own system calls in application code
and that fault handling works properly.
Additional tests for base system call infrastructure, outside of
specific system calls, go here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Test to verify k_thread_user_mode_enter() when usermode is
not enabled or supported by architecture. The thread which calls
k_thread_user_mode_enter() with CONFIG_USERSPACE disabled or
architecture doesn't support usermode, should be marked
as usermode and if it is essential, then it has to be cleared.
This is added to improve code coverage.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Move k_thread_foreach() API test from tests/kernel/profiling to
tests/kernel/threads/thread_apis.
Fixes#7966
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Summary: revised attempt at addressing issue 6290. The
following provides an alternative to using
CONFIG_APPLICATION_MEMORY by compartmentalizing data into
Memory Domains. Dependent on MPU limitations, supports
compartmentalized Memory Domains for 1...N logical
applications. This is considered an initial attempt at
designing flexible compartmentalized Memory Domains for
multiple logical applications and, with the provided python
script and edited CMakeLists.txt, provides support for power
of 2 aligned MPU architectures.
Overview: The current patch uses qualifiers to group data into
subsections. The qualifier usage allows for dynamic subsection
creation and affords the developer a large amount of flexibility
in the grouping, naming, and size of the resulting partitions and
domains that are built on these subsections. By additional macro
calls, functions are created that help calculate the size,
address, and permissions for the subsections and enable the
developer to control application data in specified partitions and
memory domains.
Background: Initial attempts focused on creating a single
section in the linker script that then contained internally
grouped variables/data to allow MPU/MMU alignment and protection.
This did not provide additional functionality beyond
CONFIG_APPLICATION_MEMORY as we were unable to reliably group
data or determine their grouping via exported linker symbols.
Thus, the resulting decision was made to dynamically create
subsections using the current qualifier method. An attempt to
group the data by object file was tested, but found that this
broke applications such as ztest where two object files are
created: ztest and main. This also creates an issue of grouping
the two object files together in the same memory domain while
also allowing for compartmenting other data among threads.
Because it is not possible to know a) the name of the partition
and thus the symbol in the linker, b) the size of all the data
in the subsection, nor c) the overall number of partitions
created by the developer, it was not feasible to align the
subsections at compile time without using dynamically generated
linker script for MPU architectures requiring power of 2
alignment.
In order to provide support for MPU architectures that require a
power of 2 alignment, a python script is run at build prior to
when linker_priv_stacks.cmd is generated. This script scans the
built object files for all possible partitions and the names given
to them. It then generates a linker file (app_smem.ld) that is
included in the main linker.ld file. This app_smem.ld allows the
compiler and linker to then create each subsection and align to
the next power of 2.
Usage:
- Requires: app_memory/app_memdomain.h .
- _app_dmem(id) marks a variable to be placed into a data
section for memory partition id.
- _app_bmem(id) marks a variable to be placed into a bss
section for memory partition id.
- These are seen in the linker.map as "data_smem_id" and
"data_smem_idb".
- To create a k_mem_partition, call the macro
app_mem_partition(part0) where "part0" is the name then used to
refer to that partition. This macro only creates a function and
necessary data structures for the later "initialization".
- To create a memory domain for the partition, the macro
app_mem_domain(dom0) is called where "dom0" is the name then
used for the memory domain.
- To initialize the partition (effectively adding the partition
to a linked list), init_part_part0() is called. This is followed
by init_app_memory(), which walks all partitions in the linked
list and calculates the sizes for each partition.
- Once the partition is initialized, the domain can be
initialized with init_domain_dom0(part0) which initializes the
domain with partition part0.
- After the domain has been initialized, the current thread
can be added using add_thread_dom0(k_current_get()).
- The code used in ztests ans kernel/init has been added under
a conditional #ifdef to isolate the code from other tests.
The userspace test CMakeLists.txt file has commands to insert
the CONFIG_APP_SHARED_MEM definition into the required build
targets.
Example:
/* create partition at top of file outside functions */
app_mem_partition(part0);
/* create domain */
app_mem_domain(dom0);
_app_dmem(dom0) int var1;
_app_bmem(dom0) static volatile int var2;
int main()
{
init_part_part0();
init_app_memory();
init_domain_dom0(part0);
add_thread_dom0(k_current_get());
...
}
- If multiple partitions are being created, a variadic
preprocessor macro can be used as provided in
app_macro_support.h:
FOR_EACH(app_mem_partition, part0, part1, part2);
or, for multiple domains, similarly:
FOR_EACH(app_mem_domain, dom0, dom1);
Similarly, the init_part_* can also be used in the macro:
FOR_EACH(init_part, part0, part1, part2);
Testing:
- This has been successfully tested on qemu_x86 and the
ARM frdm_k64f board. It compiles and builds power of 2
aligned subsections for the linker script on the 96b_carbon
boards. These power of 2 alignments have been checked by
hand and are viewable in the zephyr.map file that is
produced during build. However, due to a shortage of
available MPU regions on the 96b_carbon board, we are unable
to test this.
- When run on the 96b_carbon board, the test suite will
enter execution, but each individaul test will fail due to
an MPU FAULT. This is expected as the required number of
MPU regions exceeds the number allowed due to the static
allocation. As the MPU driver does not detect this issue,
the fault occurs because the data being accessed has been
placed outside the active MPU region.
- This now compiles successfully for the ARC boards
em_starterkit_em7d and em_starterkit_em7d_v22. However,
as we lack ARC hardware to run this build on, we are unable
to test this build.
Current known issues:
1) While the script and edited CMakeLists.txt creates the
ability to align to the next power of 2, this does not
address the shortage of available MPU regions on certain
devices (e.g. 96b_carbon). In testing the APB and PPB
regions were commented out.
2) checkpatch.pl lists several issues regarding the
following:
a) Complex macros. The FOR_EACH macros as defined in
app_macro_support.h are listed as complex macros needing
parentheses. Adding parentheses breaks their
functionality, and we have otherwise been unable to
resolve the reported error.
b) __aligned() preferred. The _app_dmem_pad() and
_app_bmem_pad() macros give warnings that __aligned()
is preferred. Prior iterations had this implementation,
which resulted in errors due to "complex macros".
c) Trailing semicolon. The macro init_part(name) has
a trailing semicolon as the semicolon is needed for the
inlined macro call that is generated when this macro
expands.
Update: updated to alternative CONFIG_APPLCATION_MEMORY.
Added config option CONFIG_APP_SHARED_MEM to enable a new section
app_smem to contain the shared memory component. This commit
seperates the Kconfig definition from the definition used for the
conditional code. The change is in response to changes in the
way the build system treats definitions. The python script used
to generate a linker script for app_smem was also midified to
simplify the alignment directives. A default linker script
app_smem.ld was added to remove the conditional includes dependency
on CONFIG_APP_SHARED_MEM. By addining the default linker script
the prebuild stages link properly prior to the python script running
Signed-off-by: Joshua Domagalski <jedomag@tycho.nsa.gov>
Signed-off-by: Shawn Mosley <smmosle@tycho.nsa.gov>
Added test to cover the case where the app can start the timer
even before the previous one is expired. In this case the timer
will start with latest settings or params.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This test is intended to validate k_msgq_alloc_init()
and k_msgq_cleanup(), when CONFIG_USERSPACE is not defined.
Also added test to validate k_msgq_get() api, if any thread is
pending to write in message queue.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Modify test to cover k_queue_insert() and k_queue_alloc_prepend(),
and allocation failure/success scenario.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
This test is intended to validate k_stack_cleanup() and
k_stack_alloc_init(). Passed stack pointer in k_stack_alloc_init()
is statically defined.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Set device state to DEVICE_PM_ACTIVE_STATE before making it busy.
Also improves the kernel/device.c coverage.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
On some architectures tick time cannot be expressed as integer
number of microseconds, introducing error in calculations using
sys_clock_us_per_tick variable.
This commit deprecates the sys_clock_us_per_tick variable and
replaces its usage by more precise calculations based on
sys_clock_hw_cycles_per_sec and sys_clock_ticks_per_sec.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit replaces _TICK_ALIGN correction in the test (which was based
on simple division), by more precise estimation using __ticks_to_ms()
and _ms_to_ticks() functions.
This commit fixes#8899.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Add test description, RTM links and doxygen links for common,
interrupt and boot page table test cases.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Add test case description and doxygen groups for tracebility.
Add references to APIs being tested in timer component.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Updated test description for tickless test cases, grouped test cases
as per doxygen requirements and some uncrustify's cosmetic changes.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The kernel incorrectly assumed, that system timer frequency is always
divisible without remainder by couple "natural" tick rates (like 100).
As result on some SoCs, time calculations was not correct, producing
strange effects (invalid sleep times, incorrect k_uptime_get() etc.).
This commit enables accurate, but costly (using 64-bit math) tick <-> ms
conversion if the selected tick interval is not exact due to hardware
limitations.
Also, this commit fixes tests in which removed _ms_per_tick were used.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
These two tests ask for lots of priority levels, more than the 32
maximum allowed by SCHED_MULTIQ (which is by design: if you have
requirements like that DUMB or SCALABLE are better choices due to the
RAM overhead of MULTIQ), so the build will fail on boards that defined
MULTIQ as default.
Don't let the platform choose the scheduler backend, ask for SCALABLE
explicitly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The SSE and SSE_FP_MATH configs exist only in the x86 architecture, so
extract them to a separate prj_x86.conf file for the fp_sharing test.
Fixes Kconfig warnings when building the test for frdm_k64f:
- warning: attempt to assign the value "y" to the undefined symbol SSE
- warning: attempt to assign the value "y" to the undefined symbol
SSE_FP_MATH
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
When adding the nRF52810, which has 24KB of RAM, some of the tests don't
compile anymore due to lack of SRAM. Address this by either filtering
the test out or reducing the amount of memory allocation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Restructured the test, added description and enhanced
semaphore count logic to check for semaphores created
only in the test.
Fixes: #7106
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The ARRAY_SIZE() utility macro will actually test the parameter types,
and ensure that it is only called with arrays, and not arrays decayed
to pointers.
Changes were performed with a simple Coccinelle script.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This is a feature Ben added so you could use Zephyr's arch layer to
bootstrap things like bootloaders without sucking in the whole kernel.
And it's worked until now.
But we never had a test for it, and I just broke it with the scheduler
rework. Add a trivial test just to make sure this continues to link
and run. Longer term it would be nice to have some kind of size
metric here to guarantee that the feature stays lean and doesn't pull
in needless code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Previously, ARC .config's would get built for this test, giving Kconfig
warnings along the lines of
warning: NUM_IRQS ... was assigned the value "3" but got the value
"38". Check its dependencies...
Add an 'arch_whitelist: arm' so that .configs only get built for ARM.
These warnings will soon be turned into errors.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The test kernel.sched.preempt was hanging in the posix arch,
due to a busy wait loop in wakeup_src_thread() added in
a803af2fa7.
We fix it by halting the cpu to let time pass in the posix
arch.
Reenabling the testcase in this board by reverting
e8a906c29c
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The native_posix board does model irq_offload properly now
and therefore this test can be executed without problems.
So let's enable it.
Related to commit:
86b5364335
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Because the address and size alignment of MPUv2,
limite the thread numbers for emsk_em7d_v22.
If not, build will faill because of DCCM overflow
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Even CONFIG_HW_STACK_PROTECTION is no here,
it is still yes as it will be re-selected by
CONFIG_TEST_HW_STACK_PROTECTION in tests/Kconfig.
So the correct setting here is:
CONFIG_TEST_HW_STACK_PROTECTION=n
This fixes#8092 (case1)
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The return value from k_fifo_get() might be NULL in some situations,
so protect against that.
Coverity-ID: 186190
Coverity-ID: 186058
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Fail in tests where we have an OOPS or a panic. Right now and in many
cases we continue and test case might be reported as PASS.
Cases that have the tag ignore_faults will ignore those faults (cases
that are testing faults for example).
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since on ARM CONFIG_NUM_IRQS option has no prompt, it cannot be properly
overridden by a prj.conf fragment. Instead make it have a prompt for
this particular test to be able to override it properly.
Fixes#8200
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
`mmsg` should be fully initialized prior to calling k_mbox_get(). The
mailbox implementation (mainly, mbox_message_match()) will look inside
the second parameter passed to k_mbox_get() in order to determine if
which pending messages should be returned to the caller.
Fixes Valgrind warning listed in #7478.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Scheduler choice is subtle across yield and k_sleep(), add calls to
those to the state table and validate that we're making the right
decisions.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
True stack sizes may be rounded up, instead of using a multiplier
just fetch the true stack size and add one to it, just one byte
over should produce an error.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Commit 4ef36a4b54 ("tests/kernel/mem_slab: Fix memory overcommit")
caught this error, but missed the fact that there are two slabs that
need to be resized. I also failed to properly explain (or, to be
honestly, fully understand) the deadlock condition, so add a nice big
comment explaining it.
Basically: you have a bunch of threads that can allocate all but one
of their blocks before trying to allocate their last one and pending.
There must be at least one block left so all the threads don't
symmetrically go to sleep waiting on each other.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Call k_thread_foreach only once from _sys_soc_suspend()
otherwise it will flood the console with stack dumps. As per
the test implementation, the one time call happens through
test_call_stacks_analyze_idle test case.
Also removed the the stack size comparision logic from
thread_callback() as the actual size allocated could be
different from what is requested based on the Kconfig option
CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT
Fixes Issue #7858
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This test spawned 4 threads all of which try to allocate 3 blocks from
the same mem_slab before freeing any, leading to a maximum of 12
in-flight allocations. But the slab contained only 3 blocks!
Most of the time it passed, but CI caught it failing on occasion,
possibly more often now due to recent scheduler changes. Fixes#8069
(hopefully).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The idea behind this test is to race two CPUs against each other,
validating that each is truly running simultaneously. But it just
assumed that the other thread/cpu would start synchronously as soon as
k_thread_create() returned.
Normally, that works fine. But while debugging I added some code that
was slowing down entry to the other thread (or maybe the return from
k_thread_create() into the main thread) long enough to allow one
thread to get a significant head start. That breaks the logic in the
test and things were inexplicably "failing".
Put a spin loop around the count so that the main thread can start
counting to within the memory system's ability to inform it of the
change from the other thread.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
* because stack analysis is required, so STACK_CHECK must be
turned off. No HW_STACK_PROTECTION has no impact on current test
* If CONIFG_USERSPACE, the real stack size is bigger than the declared
stack size
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
In arc, privileged stack is merged into defined stack. So
the real stack size should add privileged stack size.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The test was using ztest incorrectly exposing everything as one single
test function. We now have multiple tests that can be tracked back to
features and requirements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We were referring to old function names and still using the task
terminology which can be confusing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test exaustively tests preemption points between threads of all
priority classes (cooperative, preemptible, and metairq), done both
from a synchronous reschedule (via k_sem_give() and from interrupt
context (via irq_offload()), and with and without the sched_lock()
held. It then detects the next thread that runs and validates vs. the
documented priority rules.
Note that there is a whitelisted case on ARM, where irq_offload()
seems not to be working like a true interrupt (it always returns to
the interrupted context and doesn't seem to hit the normal exception
return path which can context switch). And native_posix is excluded
because of failures and the fact that it's actually never possible to
truly preempt a thread there (they run to completion inside _Swap()
et. al. and then block themselves). Both of these should be fixable
in the future but don't (seem to) directly relate to this test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The generation of Stack Corruptions reports is, now, supported
in ARM SOCs with the ARM MPU (CONFIG_ARM_MPU). Therefore, this
commit removes the workaround for ARM architecture in
tests/kernel/fatal/ and keeps it only for SOCs with the NXP MPU
(CONFIG_MXU_MPU).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Zephyr code routinely assumes conventional ILP32/LP64 integer
behavior, and occasionally relies on it to perform some nice tricks.
This is despite the fact that this behavior (while pervasively adopted
and in use on all architectures we care about supporting) isn't
actually guaranteed by the language standard which allows much looser
semantics than actual exist on hardware.
Put it into the intmath section of this test as a build time thing.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
