Adds idle wait callback to proxy by counting the number of pending
notifications.
Ensures that all connected nodes have received messages before resetting
the mesh stack.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Convert bluetooth mesh to using k_timeout struct. Many of the mesh
modules uses timeout calculations, so it is most practical to keep
the s32_t type and only initialize a k_timeout_t struct when
calling the kernel.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Backport of https://github.com/apache/mynewt-nimble/pull/724
Mesh spec 1.0.1 changes proxy disabling behavior to only affect the
relaying from proxy nodes. Previously, disabling proxy would shut down
all proxy and node activity.
Tweaks from the original commit:
- Removed redundant call to bt_mesh_adv_update() in gatt_proxy_set()
- Removed invalid ref to 4.2.11.1 in node_identity_set()
---
According to Mesh Profile Spec 1.0.1, Section 4.2.11:
"If the Proxy feature is disabled, a GATT client device can connect
over GATT to that node for configuration and control. Messages from
the GATT bearer are not relayed to the advertising bearer."
Moreover some notes have been removed from the spec compared to
version 1.0:
Mesh Profile Spec 1.0, Section 4.2.11:
"Upon transition from GATT Proxy state 0x01 to GATT Proxy state 0x00
the GATT Bearer Server shall disconnect all GATT Bearer Clients."
"The Configuration Client should turn off the Proxy state as the last
step in the configuration process."
Mesh Profile Spec 1.0, Section 4.2.11.1:
"When the GATT Proxy state is set to 0x00, the Node Identity state
for all subnets shall be set to 0x00 and shall not be changed."
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Current implementation of application's cfg_write callback only has the
possibility of returning boolean status, which in case of failure only
allows for one error code; BT_ATT_ERR_WRITE_NOT_PERMITTED.
This change makes the application able to add own security check on
characteristic subscription in the cfg_write callback and report a more
relevant error code (e.g. BT_ATT_ERR_AUTHORIZATION).
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Reduces the severity of warnings that happen from normal behavior, or
can't be prevented by the user:
- "No ID address" in hci_core.c: Reduced to an informational warning, as
this will always output with the expected usage. This isn't useful
information for 99.9% of users, and pollutes the output of all samples
using the module.
- "Composition page %u not available" in cfg_srv.c: According to the
Mesh Profile Specification section 4.4.2.2.2, the client is expected
to send page=0xff. Reduced to a debug message.
- "Connectable advertising deferred" in proxy.c: Gets logged every 10
seconds when in a Mesh Proxy connection. This is not useful
information unless the user is debugging the proxy module. Reduced to
a debug message.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Unless explicitly blacklisted, the Proxy node will forward all messages
for the ALL_NODES address to the GATT proxy client.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This adds support to set different permissions to CCCD so security can
be checked when enabling notification which conforms to:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2360:
'3.3.3.3 Client Characteristic Configuration
Authentication and authorization may be required by the server to
write the configuration descriptor.'
In addition to that also ensure that notification are not re-enabled
until the proper security level is reached to conform to the following
statement:
'10.3.1.1 Handling of GATT indications and notifications
A client “requests” a server to send indications and notifications
by appropriately configuring the server via a Client Characteristic
Configuration Descriptor. Since the configuration is persistent
across a disconnection and reconnection, security requirements must
be checked against the configuration upon a reconnection before
sending indications or notifications. When a server reconnects to a
client to send an indication or notification for which security is
required, the server shall initiate or request encryption with the
client prior to sending an indication or notification. If the client
does not have an LTK indicating that the client has lost the bond,
enabling encryption will fail.'
Fixes#17983
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add GATT initializer macro for GATT CCC and allow the
BT_GATT_CCC_MANAGED to accept an already initialized CCC user data.
This allows the application to specify the storage location of the CCC
user data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This removes the necessity of registering the storage for CCC and make
it part of the declaration itself.
Fixes#18547
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We've already got GATT services in subsys/bluetooth/services so
subsys/bluetooth/mesh is a more natural place. Aditionally this aims
to fix the Kconfig dependencies to be able to use mesh together with
BT_CUSTOM (i.e. a custom, potentially non-HCI, host stack).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
