Some files cleanup was overlooked when STM32 clock_control
was re-factored in #16486.
Fix this by removing the now superfluous files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order ease readability of Kconfig.stm32 file, split series
specific PLL configuration options into series specifc Kconfig
files.
This being done, we have now a similar pattern for series specific
code and series specific Kconfig files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
RCC device could be common to various STM32 series.
Until now, PLL handling code was set in series specific files,
even if it was driving the same device than another series.
Minimize code duplication by factorizing code between series
when possible.
With this change, some series get additional features by getting
access to code developed for other series.
Additionally, while renaming the files, remove the non informative
'x' to minimize file name length
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
soc_register.h is available in most of stm32 series.
It is sometime empty or contains includes to flash_registers.h,
which is included directly with direct reference in flash driver.
soc_register.h is also included in stm32 clock drivers, but this
driver do not use direct reference to any register anymore.
Clean up these files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
https://github.com/zephyrproject-rtos/ci-tools/pull/65 tweaks the check
for references to undefined Kconfig symbol to whitelist anything on the
form 'CONFIG_FOO_*' (or 'CONFIG_FOO_*_...'). This is meant for #endif
comments that talk about many related symbols.
Fix two existing #endif comments to use that format, so that some
entries can be removed from the whitelist in the CI check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add support for CLKOUT source selection and divider as found on the
NXP Kinetis KE1xF SoC series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a new clock control driver for NXP Kinetis SoCs that have the
Peripheral Clock Controller module (PCC).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change file naming pattern from BoardNameX_ll_clock.c to
clock_BoardNameX.c
File containing LL functions will have the "_ll_" naming
scheme (such as clock_stm32_ll_common.c and .h)
Signed-off-by: Yaël Boutreux <yael.boutreux@st.com>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add support to stm32wb series in stm32 clock_control driver.
Ip is similar to stm32l4 one but AHB bus presacler is renamed
to "CPU1" and CPU2 and AHB4 prescalers should be defined.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Added option to have LFCLK synthesized from HFCLK. It is not low
power but ensures constant relation between HFCLK and LFCLK and
might be useful in certain scenarios (e.g. testing).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
An external project extending the Zephyr RTOS and its drivers may have
subsystems that must use its own specific driver(s) when active. One
example is the nRF5x NVMC that must be scheduled in between radio
operations. A subsystem may also be dependent on its own drivers for
security, real-time and/or because of hardware constrains.
In order to not introduce non-Zephyr specific code into the Zephyr tree,
an option is added to disable the in-tree drivers in Zephyr. Because
Kconfig does not support a good way of de-selecting other symbols, a
variable on the form `<DRIVER>_FORCE_ALT` is added as a
dependency for each `<DRIVER>`. For example, the out-of-tree subsystem
will select `FLASH_NRF_FORCE_ALT` to disable the in-tree driver. A
solution for issue #8181 would open up for a more general solution,
however #8181 requires significant effort.
Support for out-of-tree drivers is added to Nordic drivers for
clock_control, entropy and flash.
A generic solution for this is desired. Issue #14527 is tracking that
progress.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Add choice variables for CLOCK_CONTROL_NRF_SOURCE and
CLOCK_CONTROL_NRF_ACCURACY such that the choices may be augmented
out-of-tree.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Redefining the config will not let another (out-of-source) driver be
chosen instead of the default. The driver is practically forced by the
soc settings. This commit moves default settings from soc/arm/nordic_nrf
into the drivers themselves.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
These symbols appear within an 'if CLOCK_CONTROL' (in
drivers/clock_control/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Converts the rv32m1 clock control driver to use 'DT_' prefixed defines
instead of deprecated non-prefixed defines.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Allow for the MSI to be auto-cal'd via an LSE when enabled, even when
being used as a source for the PLL as the sysclock.
Signed-off-by: Pushpal Sidhu <psidhu.devel@gmail.com>
This commit adds the Clock Control Interrupt Service
Routine into the customized vector table, when building
for nRF52X-based platforms. As a result, the interrupts
generated by the clock control will not interfere with
the test.
Fixes#13823.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For PLLQ divisor configuration, use directly RCC_PLLCFGR_PLLQ_Pos
definition instead of calculating its position from RCC_PLLCFGR_PLLQ.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Default AHB presacler value was set to 0 which is not an allowed
value. Set it to 1 and limit range from 1 to 512.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a Peripheral Clock Controller (PCC) driver. This gates and ungates
clocks to various peripherals on the SoC.
Signed-off-by: Michael Scott <mike@foundries.io>
Signed-off-by: Marti Bolivar <marti@foundries.io>
Minor adjustments are done to the nRF clock_control and rtc_timer
drivers to make them usable on nRF9160 as well.
The arm_irq_vector_table test code is modified only because it uses
the function that has been renamed in the nrf_rtc_timer driver.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use the symbol generated from DT so that it is common for nRF9160
and nRF5 family SoCs. To avoid artificial renaming of CLOCK_POWER_IRQn
to POWER_CLOCK_IRQn.
For nRF5 family SoCs clock nodes were not defined so far, thus they are
added so that the proper DT symbol is generated for them as well.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Renaming Kconfig.nrf5 to Kconfig.nrf in the wake of extending
the use of the nRF clock control driver to both nRF5 and nRF91
SOC series.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the nrf5_clock_control.h and
nrf5_clock_control.c files to nrf_clock_control.h and
nrf_clock_control.c, respectively, as they are used
in nRF9160 builds, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for Low Speed External 32.768 kHz oscillator (LSE ).
Add support for MSI PLL-Mode offering an automatic calibration feature
in combination with the LSE. This allows the MSI to reach an accurate
+/-0,25% clock perfectly suitable for USB full-speed clock.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Driver was not complaining when unsupported bus values where used.
Add default to switch cases and return error.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The LFSTARTED event was disabled so it was impossible to wake the
CPU up on LF clock being ready. The Bluetooth stack was putting
the CPU to sleep, expecting to be woken up on LFSTARTED event.
As the event never triggered, the CPU was woken up seconds later
by a different event introducing a multi-second startup delay.
Bug introduced by 23c92100ac.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix RCOSC calibration initiation to ensure LF clock is
running; and the HF clock is running with crystal before
triggering the actual calibration in ISR.
Fixes#10811.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There are two asserts in the ISR for clock events on the nRF5 that
appear to be accidental.
The first assert fails if there are any LF clock started events, which
there will be when starting up the RC oscillator with calibration.
The second assert fails when we decrement the refcount on the HF
oscillator after finishing a calibration. There will typically be
users left of the HF oscillator, so _m16src_stop() doesn't actually
stop it and thus doesn't return 0.
This code typically works fine because it's not built with asserts
enabled by default. Can be reproduced on a BBC microbit with the
default config plus CONFIG_ASSERT=y.
Signed-off-by: Jonas Norling <jonas.norling@greeneggs.se>
Depend on the new SOC_COMPATIBLE_NRF symbol instead of the
SOC_FAMILY_NRF symbol.
This allows the driver to be used from the bsim simulated board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
* Add usbd_dc_nrfx shim
The shim is based on the previous one usbd_dc_nrf5.
For handling the USBD hardware, tested nrfx_usbd driver from nRF SDK
was used.
Briefly tested examples:
* usb/cdc_acm
* usb/dfu (USB communication only due to flash handling issues)
* usb/hid-mouse
* bluetooth/hci_usb
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
