Rename existing headers and sybols to mqtt_legacy, to allow new
implementation to keep old config and header names.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Let's expand the sanity build testing for the lwm2m_client by
doing the following:
- Add variant builds for DTLS, bluetooth and modem
- Check various combinations of hardware across each of these
variant builds: frdm_k64f, nrf52_pca10040, nrf52840_pca10056,
disco_l475_iot1
Signed-off-by: Michael Scott <mike@foundries.io>
When the WNC-14A2A modem binding was originally introduced, I thought
the base_label would shorten the define keeping the result short and
easily portable. Turns out with the latest changes, it has a side
effect of removing the "DT_*" prefix which is breaking the build.
Let's remove "base_label" from the modem binding and adjust all of
the dts_fixups referring to the WNC14A2A defines.
NOTE: This commit moves the left-over WNC14A2A dts_fixup defines from
the nRF52 soc into samples/net/lwm2m_client as the new values.
They will stay there until the modem can be re-configured as a shield.
Signed-off-by: Michael Scott <mike@foundries.io>
During the modem overlay move from the K64F board directory to the
LwM2M sample code, 2 DTS entries were dropped:
current-speed = <115200>;
status = "ok";
Without these entries the DTS defines for UART2 and CURRENT_SPEED
are missing from the generated_dts_board.h file.
Signed-off-by: Michael Scott <mike@foundries.io>
The wncm14a2a modem is an add-on/shield and not part of the
nrf52840_pca10056 board and should be maintained and configured
outside of the board.
This needs to be moved to a shield, see #10965.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The wncm14a2a modem is an add-on/shield and not part of the nrf52840_mdk
board and should be maintained and configured outside of the board.
This needs to be moved to a shield, see #10965.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
echo_server can use up to 6 sockets therefore it needs more file
descriptors than the maximum default value specified.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Change the sample to use a different controller device name per pin. We
shouldn't assume that on a given board that all the pins we are using
will be on the same GPIO controller device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a dts binding for the Atmel WINC1500 WIFI chip. Update the
quark_se_c1000_devboard to utilize this binding as well as the wifi
sample app.
We now get all the GPIOs related to the Atmel WINC1500 from the device
tree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
All labels containing "_<8-hex-digits>_" or "16550_<3or6-hex-digits>_"
in their names, assumed to be generated by the extracting script,
are updated with the DT_ prefix, to reflect the recent changes made
to the script.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a shell that implements "promisc [on | off] <interface>"
command to toggle promiscuous mode support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Couple of findings which were revealed after changing
LOG_MODULE_REGISTER macro:
- missing semicolons after LOG_MODULE_REGISTER()
- missing LOG_LEVEL defines
- other
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The overlay-e1000.conf can be used for example with Qemu
which has support for e1000 ethernet driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This required wiring external daughter board by hand, it's not provided
by the board directly, let's remove this.
Applying the change on relevant samples.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is an mcr20a shield board for frdm_k64f which is easier to use
than wiring a cc2520 by hand. So let's remove this.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Issue found using Coccinelle. Semaphore is not required at all
in this application.
Fixes#11150
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Improved RX path to use ring buffer for incoming data instead of single
byte buffer. Improved TX path to use ring buffer. Added support for
asynchronous UART API (interrupts).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Tweak ROM usage of quark_se_c1000_devboard so that test_usbnet
test will pass. The board just disables network statistics as
that is not really needed here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The wncm14a2a modem is an add-on/shield and not part of the frdm_k64f
board and should be maintained and configured outside of the board.
This needs to be moved to a shield, see #10965.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The task_profiler is not needed nor used by zperf so remove
it from CMakefile.
Fixes#11051
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move configuration to overlay-netusb.sonf, enable zero-configuration,
working with LLMNR in Windows and avahi-autoipd in Linux.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
This updates documentation to account for the new shell which
does not support 'select' for command context anymore.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The wifi shell sample asserts when trying to do a sleep
forever.
The sleep should not be necessary, so removing it.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The "zperf udp download" optional port parameter was not properly
checked, the default port check branch was never reached.
Fix also the same issue in tcp download command.
Coverity-CID: 188881
Fixes#10758
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change the default behaviour of the host network interface
setup. Now user needs to execute net-setup.sh script from
net-tools project to setup host ethernet interface. The script
needs to be run as a root user. Then zephyr.exe can be started
as a normal user.
Example:
cd net-tools
sudo ./net-setup.sh
This will create zeth network interface and set IP address and
routes properly. See other command line options by typing
./net-setup.sh --help
Old behaviour is still there if one enables
CONFIG_ETH_NATIVE_POSIX_STARTUP_AUTOMATIC=y
in which case one needs to use the command
sudo --preserve-env zephyr.exe
to start the Zephyr process.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove redundant 'sample' tag and add something that matches the
functionality and features being tested, demonstrated.
Avoid short abbriviations and using full names for fs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ROM consumption is higher with new shell which prevents
quark_se_c1000_devboard from building. Remove that board
from sanitychecker runs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use new shell instead of the legacy one. This commit also fixes
the configuration file mess and allows the program to be run on
more hardware.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There were no shell commands implemented so remove the shell
support from this sample application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
