If we specify --device-testing and -M make it so that the resulting
artifacts are usable to run with device-testing again. This means
keeping around the zephyr binary images (zephyr.{bin, hex, elf}) and
a few files so 'west' can function for flashing (CMakeCache.txt and
zephyr/runners.yaml).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If there are more than one RX or TX threads, then make the name
of each of them unique so that it is easier to figure them out
in "kernel stacks" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The name of the connection manager thread (conn_mgr_thread) was
unnecessarily long in "kernel stacks" command. So make the name
to "conn_mgr" which fits nicely to the output of that command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove the range on the setting the bluetooth BT_RX_STACK_SIZE.
This range prevents setting the RX stack size lower than 1024,
which depending on the application is too high.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add posix_board_if.h which declares posix_exit().
This fixes implicit declaration of function errors when running
sanitycheck on samples for native_posix that calls sys_reboot().
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@prevas.dk>
Add nucleo_l552ze_q_ns board to the allowed list of platforms
for the tfm_ipc sample. This allows the sample to be built for
the nucleo_l552ze_q_ns platform by sanity check.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix the name of the sample in the .yaml file so it matches
the sample directory, and does not collide with tfm_ipc.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the samples' documentation we update the requirements
for building TF-M binaries according to the latest upstream
TF-M documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Force CI to manually install imgtool, which is needed
for sanitycheck to build and run the TF-M integration
samples with MCUboot (where MCUboot is built from the
TF-M external project).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add documentation on how to build and run the TF-M integration
samples on nRF platforms.
The arm-none-eabi-gcc does not need to be on the PATH anymore
for building and running the tfm_ipc sample on nucleo so remove
the note from the sample docs.
Fix some paths for TFM binaries for the LPC board as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adapts the DTS overlay for nucleo_l552ze_q_ns
board, to comply with the changes applied in the flash
layout of the TF-M build.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Changes required in TF-M integration samples CMakeLists.txt
files due to the new upstream TF-M build system. In brief,
configuration related to PSA API (IPC), Regression, and
Isolation level needs to be passed, now, directly, not
via invoking a given TF-M CMake configuration.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Pass the compiler name and path to the TF-M post-build
script as an argument, so the TF-M build can work with
the Zephyr SDK as well (not only with the GNU ARM embedded
toolchain.)
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add the required documentation extensions for the nRF5340
and the nRF9160 DKs that explains how to build and run
Zephyr with TF-M as the Secure firmware image counterpart.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding support for TF-M in the Nordic nRF9160 DK.
Allow the TF-M integration samples to be built and
executed for nRF9160 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update the TF-M post-build scripts in the relevant
ARM platforms in the wake of updating TF-M to the
latest upstream.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
TF-M related information in the relevant board definitions
needs to be updated in the wake of the new TF-M Build
system.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update the default paths to private keys used
for signing the Secure and the Non-Secure firmware,
when building Zephyr together with TF-M. The update
is done to match the default configuration in
the upstream TF-M project.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Without the -Wno-typedef-redefinition option, arcmwdt (clang based)
complains if a typedef gets redefined in gnu99 mode (since this is
officially a C11 feature). While new versions of GCC do not seem to
issue this warning in gnu99 mode anymore. So some existing code
with typedef redefined which works well with GCC will issue this
warning. As this warning is not fatal, so simply shut it off for good.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Remove two operation flags in the SPI configuration
instance, which disturb software controlled chip select
lines (CS never gets released).
Signed-off-by: Marco Peter <marco@peter-net.ch>
Application might need to know the GSM modem device name so
provide it in the header file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If an address was obtained by IPCP, it should always be removed in
ipcp_down(). This commit replaces the predicate with something slightly
more robust.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
When PPP is muxed, using uart_poll_out resulted in each byte getting
wrapped in a muxing header. This led to UART bombardment which
can quickly cause some modems to hang and panic. This was observed
regularly using a SIMCOM7600E modem.
A perfect fix would involve rewriting ppp.c, uart_mux.c and
modem_iface_uart.c to all use another UART API, but that would be more
invasive by several orders of magnitude than this one, which utilizes
the fact that the uart_mux implementation of uart_fifo_fill does NOT
require ISR context. Since the Zephyr UART API states that the behavior
of uart_fifo_fill outside of ISR context is implementation defined, this
should be kosher.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
These changes enable applications to restart the networking stack which
was previously not possible without rebooting the device. This was a
major show-stopper because it made power management impossible, and
furthermore made it impossible to recover from a bad modem state without
rebooting.
This has been verified to work on a SIMCOM7600E modem, both with and
without CONFIG_GSM_MUX enabled.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
The char pointer that is logged could get scoped out and so should be
strduped before logging.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Several utility macros must be given the name of a macro to apply to
every element in a sequence to transform it. When no transformation
is necessary a macro still needs to be provided. That macro is
IDENTITY.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Instead of having a .99 version, use latest and link to the lates
documentation on the left side bar.
The version number has been confusing users where it was difficult to
determine if they were looking at the development tree or some released
version.
Fixes#24453
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We rework the titles and headers of the section where we
describe the process for submitting new module and changes
to existing modules. Move the 'requirements' section at the
top of the page.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We move the section about how to build Zephyr and integrate
with modules into its own section with title
'Integrate modules in Zephyr build system'.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the module documentation page, add a section to describe
the requirements and the allowed practices for synchronizing
the module code base with the upstream project.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the module documentation page, add sections for
Testing and Documentation requirements. Add also a
section decribing polices for module deprecation and
removal.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding content to describe policies and requirements
around licensing in Zephyr modules.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a section that summarizes the recommended
contribution workflow in zephyr modules.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Submit a paragraph that summarizes the different
individual roles in Zephyr module repositories.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
