Moved to: include/zephyr/drivers/misc/flexram/memc_nxp_flexram.h
This change makes it so that the .h file does not need to be pulled in
using the CMakeLists.txt file, and can be included like other public
includes.
Removes drivers/memc/memc_nxp_flexram.h
Add memc_nxp_flexram.h to include/zephyr/drivers/misc/flexram
Modify drivers/memc/memc_nxp_flexram.c to use the new include path.
Modifies the mimxrt1170 magic_addr sample to include the driver using
the new include path.
Modify the soc file: soc/nxp/imxrt/imxrt11xx/soc.c to use the new path.
Add relevant information to migration-guide-4.2.rst.
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
Co-authored-by: Declan Snyder <declan.snyder@nxp.com>
As well described in a previous PR [1], the GNU ld and LLVM lld linkers
treat the location counter (`.`) differently. lld always inteprets the
location counter as an absolute address whereas ld interprets it as an
offset from the start of the current object.
The NXP boot header linker script files use `.` assignment to specify an
offset within the rom_start region (ld-style). This causes lld to error
out since it interprets this as the location counter moving backwards.
To fix this, re-use the idea from the previous PR [1]:
replace `. = FOO` with `. += FOO - (. - __rom_start_address)`
This sets the location counter in a way that works with both ld and lld.
[1] https://github.com/zephyrproject-rtos/zephyr/pull/58315
Signed-off-by: Kesavan Yogeswaran <hikes@google.com>
if CONFIG_PM=y, board will enter low power,
which will cause problem for debugger.
So for ztest cases, we need enable this to avoid problem.
This used to apply to soc/platform level, now remove them.
Signed-off-by: Hake Huang <hake.huang@nxp.com>
These socs were missing a config line to disable SYSTICK if the LPTMR is
configured for the system timer, similar to how other SOCs do this for
alternative system timers than systick.
This fixes build errors in the case where that lptmr kconfig is enabled.
Also, the LPTMR kconfig should be default no because it is a secondary
option for the system timer, being lower resolution than systick. This
also resolves build errors.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
There is a configuration of the DCDC in the clock_init for the RT10xx.
The RT11xx has a kconfig flag ADJUST_DCDC to enable or disable DCDC
adjust code. This flag is now also used for the RT10xx to be able to
enable or disable the DCDC adjust code.
Signed-off-by: Adrian Bieri <adrian.bieri@loepfe.com>
In spi loopback test, high bandrate is 16Mbps while some source of lpspi
are too low to support this bandrate. According the reference mannual,
to support 16Mbps, Input frequency at least should be 2*16MHz.
Update LPSPI input freq to maximum to get more accurate band rate
because band rate must be divisible by input freq.
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
The i.MX RT700 has an ultra-low power Sense Subsystem
which includes an ARM Cortex-M33 and
Cadence Tensilica HiFi 1 DSP.
Here, we add support for the HiFi1 core.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
The i.MX RT700 has a compute subsystem which includes
a primary ARM Cortex-M33 running at 325 MHz and
Cadence Tensilica HiFi4 DSP.
Here, we add support for the HiFi4 core.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
This driver was deprecated and must be removed by Zephyr version
4.1 according to lifecycle/release guidelines.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
This config was missed when converting from eth_mcux to nxp_enet driver,
re-add it and use new one instead of old one.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Drop the override conditions to ADC_MCUX_12B1MSPS_SAR for imxrt, the
current one causes the driver to be built when it does not have to and
are not needed anyway, and drop the HAS_MCUX_12B1MSPS_SAR option
entirely as it's not needed anymore.
Tested with:
west build -p -b teensy40 tests/lib/devicetree/api_ext
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This commits repairs calling function trdc_enable_all_access() only
when using build for standalone CM33 or CM7 core build.
For the multicore this function should be called only by CM33 core.
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
This commit adds MBOX device tree entry for RT1180.
Adds functions to copy and boot CM7 core.
Adds MPU region for shared memory without caching.
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
When TRDC permission fails to be obtained, it does not recycle to
access ELE core to prevent blocking problems. The current practice
only generates a log warning alarm.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
When TRDC permission fails to be obtained, it does not recycle to
access ELE core to prevent blocking problems. The current practice
only generates a log warning alarm.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
This SoC has an external XCACHE controller for CPU0
instruction and data bus.
Add code to enable the data cache. Instruction cache
is already enabled by SystemInit.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Make clock init functions in SOC level weak and global so they can be
overriden by board/app level.
Ideally these should have been put at board level but for now just make
them weak so they can be overriden without breaking anything.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The current soc clock_init only configures the FlexSPI1 interface and
not the FlexSPI2.
This Commit adds the clock configuration for the second FlexSPI
in case one boots from the FlexSPI2.
Signed-off-by: Felix Schramek <felix.schramek@gmail.com>
A problem was discovered during development: the
electrical characteristics of the pins were not
set according to the device tree settings.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
- Adds a flash runner configuration for mimxrt1189,
used for sysbuild multi-image projects.
- Avoid unwanted multiple erases and resets.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The CM33 has a XCACHE controller to manage the External
cache. Remove unused Kconfigs as we can use Zephyr API's
to manage the CM33 cache,
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
add lpspi clock enablement code
DMA3/4 access different domain is controlled by TRDC, release all
the domain access permission for DMA3/4, and add privilege and secure
information in dma access request signal by DAC module
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Add CONFIG_SECOND_CORE_MCUX_LAUNCHER. This Kconfig is only enabled when
using sysbuild targeting the Cortex-M4 core on the RT11xx series, and
results in loading a minimal application to the Cortex-M7 core that
boots the Cortex-M4 core. This makes developing on the M4 core simpler,
as the user can now simply target the core with sysbuild enabled and
flashing the application will work as expected.
Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
Although I/DCACHE aren't included under cm33 architecture,
NXP design and integrate Code Cache/Sys Cache for cm33 to
speed up the core execution efficiency.
For the convenience of developers, we believe that software
developers can directly use Code/Sys Cache as arm's I/D Cache.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Add the DWARF v5 sections to the linker scripts of
imx, imxrt, acp_6_0 and xtensa_sample_controller.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Now that MbedTLS is capable of automatically enabling
CONFIG_ENTROPY_GENERATOR (when available), we can remove forced
enablements in boards|soc deconfig files.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is based on the introduction of a helper Kconfig symbol in
"subsys/random/Kconfig" which is named CSPRNG_AVAILABLE. When this is
enabled it means that there is a "zephyr,entropy" property defined in the
device-tree, therefore Mbed TLS can select ENTROPY_GENERATOR to allow
the platform specific driver to be included into the build.
This commit also changes other locations where CSPRNG_ENABLED was used
moving it to CSPRNG_AVAILABLE in order to solve dependency loop
build failures.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
On NXP RT1170 SOC, ADC ETC exists but it can not be enabled because
of dependency on HAS_MCUX_ADC_ETC.
Also, ADC ETC should only work with ADC together, there is no use
case to run it standalone.
Fixes:#81466
Signed-off-by: Raymond Lei <raymond.lei@nxp.com>
