/* * Copyright (c) 2017 Jean-Paul Etienne * * SPDX-License-Identifier: Apache-2.0 */ /** * @file GPIO driver for the SiFive Freedom E310 Processor */ #include #include #include #include #include #include #include "gpio_utils.h" typedef void (*fe310_cfg_func_t)(void); /* fe310 GPIO register-set structure */ struct gpio_fe310_t { unsigned int in_val; unsigned int in_en; unsigned int out_en; unsigned int out_val; unsigned int pue; unsigned int ds; unsigned int rise_ie; unsigned int rise_ip; unsigned int fall_ie; unsigned int fall_ip; unsigned int high_ie; unsigned int high_ip; unsigned int low_ie; unsigned int low_ip; unsigned int iof_en; unsigned int iof_sel; unsigned int invert; }; struct gpio_fe310_config { uint32_t gpio_base_addr; uint32_t gpio_irq_base; fe310_cfg_func_t gpio_cfg_func; }; struct gpio_fe310_data { /* list of callbacks */ sys_slist_t cb; }; /* Helper Macros for GPIO */ #define DEV_GPIO_CFG(dev) \ ((const struct gpio_fe310_config * const)(dev)->config->config_info) #define DEV_GPIO(dev) \ ((volatile struct gpio_fe310_t *)(DEV_GPIO_CFG(dev))->gpio_base_addr) #define DEV_GPIO_DATA(dev) \ ((struct gpio_fe310_data *)(dev)->driver_data) static void gpio_fe310_irq_handler(void *arg) { struct device *dev = (struct device *)arg; struct gpio_fe310_data *data = DEV_GPIO_DATA(dev); volatile struct gpio_fe310_t *gpio = DEV_GPIO(dev); const struct gpio_fe310_config *cfg = DEV_GPIO_CFG(dev); int pin_mask; /* Get the pin number generating the interrupt */ pin_mask = 1 << (riscv_plic_get_irq() - (cfg->gpio_irq_base - RISCV_MAX_GENERIC_IRQ)); /* Call the corresponding callback registered for the pin */ _gpio_fire_callbacks(&data->cb, dev, pin_mask); /* * Write to either the rise_ip, fall_ip, high_ip or low_ip registers * to indicate to GPIO controller that interrupt for the corresponding * pin has been handled. */ if (gpio->rise_ip & pin_mask) gpio->rise_ip = pin_mask; else if (gpio->fall_ip & pin_mask) gpio->fall_ip = pin_mask; else if (gpio->high_ip & pin_mask) gpio->high_ip = pin_mask; else if (gpio->low_ip & pin_mask) gpio->low_ip = pin_mask; } /** * @brief Configure pin * * @param dev Device structure * @param access_op Access operation * @param pin The pin number * @param flags Flags of pin or port * * @return 0 if successful, failed otherwise */ static int gpio_fe310_config(struct device *dev, int access_op, uint32_t pin, int flags) { volatile struct gpio_fe310_t *gpio = DEV_GPIO(dev); if (access_op != GPIO_ACCESS_BY_PIN) return -ENOTSUP; if (pin >= FE310_PINMUX_PINS) return -EINVAL; /* Configure gpio direction */ if (flags & GPIO_DIR_OUT) { gpio->in_en &= ~BIT(pin); gpio->out_en |= BIT(pin); /* * Account for polarity only for GPIO_DIR_OUT. * invert register handles only output gpios */ if (flags & GPIO_POL_INV) gpio->invert |= BIT(pin); else gpio->invert &= ~BIT(pin); } else { gpio->out_en &= ~BIT(pin); gpio->in_en |= BIT(pin); /* Polarity inversion is not supported for input gpio */ if (flags & GPIO_POL_INV) return -EINVAL; /* * Pull-up can be configured only for input gpios. * Only Pull-up can be enabled or disabled. */ if ((flags & GPIO_PUD_MASK) == GPIO_PUD_PULL_DOWN) return -EINVAL; if ((flags & GPIO_PUD_MASK) == GPIO_PUD_PULL_UP) gpio->pue |= BIT(pin); else gpio->pue &= ~BIT(pin); } /* * Configure interrupt if GPIO_INT is set. * Here, we just configure the gpio interrupt behavior, * we do not enable/disable interrupt for a particular * gpio. * Interrupt for a gpio is: * 1) enabled only via a call to gpio_fe310_enable_callback. * 2) disabled only via a call to gpio_fe310_disabled_callback. */ if (!(flags & GPIO_INT)) return 0; /* * Interrupt cannot be set for GPIO_DIR_OUT */ if (flags & GPIO_DIR_OUT) return -EINVAL; /* Edge or Level triggered ? */ if (flags & GPIO_INT_EDGE) { gpio->high_ie &= ~BIT(pin); gpio->low_ie &= ~BIT(pin); /* Rising Edge, Falling Edge or Double Edge ? */ if (flags & GPIO_INT_DOUBLE_EDGE) { gpio->rise_ie |= BIT(pin); gpio->fall_ie |= BIT(pin); } else if (flags & GPIO_INT_ACTIVE_HIGH) { gpio->rise_ie |= BIT(pin); gpio->fall_ie &= ~BIT(pin); } else { gpio->rise_ie &= ~BIT(pin); gpio->fall_ie |= BIT(pin); } } else { gpio->rise_ie &= ~BIT(pin); gpio->fall_ie &= ~BIT(pin); /* Level High ? */ if (flags & GPIO_INT_ACTIVE_HIGH) { gpio->high_ie |= BIT(pin); gpio->low_ie &= ~BIT(pin); } else { gpio->high_ie &= ~BIT(pin); gpio->low_ie |= BIT(pin); } } return 0; } /** * @brief Set the pin * * @param dev Device struct * @param access_op Access operation * @param pin The pin number * @param value Value to set (0 or 1) * * @return 0 if successful, failed otherwise */ static int gpio_fe310_write(struct device *dev, int access_op, uint32_t pin, uint32_t value) { volatile struct gpio_fe310_t *gpio = DEV_GPIO(dev); if (access_op != GPIO_ACCESS_BY_PIN) return -ENOTSUP; if (pin >= FE310_PINMUX_PINS) return -EINVAL; /* If pin is configured as input return with error */ if (gpio->in_en & BIT(pin)) return -EINVAL; if (value) gpio->out_val |= BIT(pin); else gpio->out_val &= ~BIT(pin); return 0; } /** * @brief Read the pin * * @param dev Device struct * @param access_op Access operation * @param pin The pin number * @param value Value of input pin(s) * * @return 0 if successful, failed otherwise */ static int gpio_fe310_read(struct device *dev, int access_op, uint32_t pin, uint32_t *value) { volatile struct gpio_fe310_t *gpio = DEV_GPIO(dev); if (access_op != GPIO_ACCESS_BY_PIN) return -ENOTSUP; if (pin >= FE310_PINMUX_PINS) return -EINVAL; /* * If gpio is configured as output, * read gpio value from out_val register, * otherwise read gpio value from in_val register */ if (gpio->out_en & BIT(pin)) *value = !!(gpio->out_val & BIT(pin)); else *value = !!(gpio->in_val & BIT(pin)); return 0; } static int gpio_fe310_manage_callback(struct device *dev, struct gpio_callback *callback, bool set) { struct gpio_fe310_data *data = DEV_GPIO_DATA(dev); _gpio_manage_callback(&data->cb, callback, set); return 0; } static int gpio_fe310_enable_callback(struct device *dev, int access_op, uint32_t pin) { const struct gpio_fe310_config *cfg = DEV_GPIO_CFG(dev); if (access_op != GPIO_ACCESS_BY_PIN) return -ENOTSUP; if (pin >= FE310_PINMUX_PINS) return -EINVAL; /* Enable interrupt for the pin at PLIC level */ irq_enable(cfg->gpio_irq_base + pin); return 0; } static int gpio_fe310_disable_callback(struct device *dev, int access_op, uint32_t pin) { const struct gpio_fe310_config *cfg = DEV_GPIO_CFG(dev); if (access_op != GPIO_ACCESS_BY_PIN) return -ENOTSUP; if (pin >= FE310_PINMUX_PINS) return -EINVAL; /* Disable interrupt for the pin at PLIC level */ irq_disable(cfg->gpio_irq_base + pin); return 0; } static const struct gpio_driver_api gpio_fe310_driver = { .config = gpio_fe310_config, .write = gpio_fe310_write, .read = gpio_fe310_read, .manage_callback = gpio_fe310_manage_callback, .enable_callback = gpio_fe310_enable_callback, .disable_callback = gpio_fe310_disable_callback, }; /** * @brief Initialize a GPIO controller * * Perform basic initialization of a GPIO controller * * @param dev GPIO device struct * * @return 0 */ static int gpio_fe310_init(struct device *dev) { volatile struct gpio_fe310_t *gpio = DEV_GPIO(dev); const struct gpio_fe310_config *cfg = DEV_GPIO_CFG(dev); /* Ensure that all gpio registers are reset to 0 initially */ gpio->in_en = 0; gpio->out_en = 0; gpio->pue = 0; gpio->rise_ie = 0; gpio->fall_ie = 0; gpio->high_ie = 0; gpio->low_ie = 0; gpio->invert = 0; /* Setup IRQ handler for each gpio pin */ cfg->gpio_cfg_func(); return 0; } static void gpio_fe310_cfg_0(void); static const struct gpio_fe310_config gpio_fe310_config0 = { .gpio_base_addr = FE310_GPIO_0_BASE_ADDR, .gpio_irq_base = FE310_GPIO_0_IRQ, .gpio_cfg_func = gpio_fe310_cfg_0, }; static struct gpio_fe310_data gpio_fe310_data0; DEVICE_AND_API_INIT(gpio_fe310_0, CONFIG_GPIO_FE310_GPIO_NAME, gpio_fe310_init, &gpio_fe310_data0, &gpio_fe310_config0, POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, &gpio_fe310_driver); static void gpio_fe310_cfg_0(void) { IRQ_CONNECT(FE310_GPIO_0_IRQ, CONFIG_GPIO_FE310_0_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_1_IRQ, CONFIG_GPIO_FE310_1_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_2_IRQ, CONFIG_GPIO_FE310_2_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_3_IRQ, CONFIG_GPIO_FE310_3_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_4_IRQ, CONFIG_GPIO_FE310_4_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_5_IRQ, CONFIG_GPIO_FE310_5_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_6_IRQ, CONFIG_GPIO_FE310_6_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_7_IRQ, CONFIG_GPIO_FE310_7_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_8_IRQ, CONFIG_GPIO_FE310_8_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_9_IRQ, CONFIG_GPIO_FE310_9_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_10_IRQ, CONFIG_GPIO_FE310_10_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_11_IRQ, CONFIG_GPIO_FE310_11_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_12_IRQ, CONFIG_GPIO_FE310_12_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_13_IRQ, CONFIG_GPIO_FE310_13_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_14_IRQ, CONFIG_GPIO_FE310_14_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_15_IRQ, CONFIG_GPIO_FE310_15_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_16_IRQ, CONFIG_GPIO_FE310_16_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_17_IRQ, CONFIG_GPIO_FE310_17_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_18_IRQ, CONFIG_GPIO_FE310_18_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_19_IRQ, CONFIG_GPIO_FE310_19_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_20_IRQ, CONFIG_GPIO_FE310_20_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_21_IRQ, CONFIG_GPIO_FE310_21_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_22_IRQ, CONFIG_GPIO_FE310_22_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_23_IRQ, CONFIG_GPIO_FE310_23_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_24_IRQ, CONFIG_GPIO_FE310_24_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_25_IRQ, CONFIG_GPIO_FE310_25_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_26_IRQ, CONFIG_GPIO_FE310_26_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_27_IRQ, CONFIG_GPIO_FE310_27_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_28_IRQ, CONFIG_GPIO_FE310_28_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_29_IRQ, CONFIG_GPIO_FE310_29_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_30_IRQ, CONFIG_GPIO_FE310_30_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); IRQ_CONNECT(FE310_GPIO_31_IRQ, CONFIG_GPIO_FE310_31_PRIORITY, gpio_fe310_irq_handler, DEVICE_GET(gpio_fe310_0), 0); }