mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-08-03 09:35:21 +00:00
933446ff4a
On STM32MP13, a dedicated MCO enable bit within the MCO clock control register must be set in order to activate the MCO. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
90 lines
2.9 KiB
C
90 lines
2.9 KiB
C
/*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Copyright (C) 2024, Joakim Andersson
|
|
*/
|
|
|
|
#include <zephyr/device.h>
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
#include <zephyr/devicetree.h>
|
|
#include <zephyr/arch/cpu.h>
|
|
#include <zephyr/drivers/clock_control/stm32_clock_control.h>
|
|
#include "clock_stm32_ll_common.h"
|
|
|
|
#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32_clock_mco)
|
|
#define DT_DRV_COMPAT st_stm32_clock_mco
|
|
#define HAS_PRESCALER 1
|
|
#elif DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_clock_mco)
|
|
#define DT_DRV_COMPAT st_stm32f1_clock_mco
|
|
#endif
|
|
|
|
struct stm32_mco_config {
|
|
const struct pinctrl_dev_config *pcfg;
|
|
#if defined(HAS_PRESCALER)
|
|
uint32_t prescaler;
|
|
#endif
|
|
/* clock subsystem driving this peripheral */
|
|
const struct stm32_pclken pclken[1];
|
|
};
|
|
|
|
static int stm32_mco_init(const struct device *dev)
|
|
{
|
|
const struct stm32_mco_config *config = dev->config;
|
|
const struct stm32_pclken *pclken = &config->pclken[0];
|
|
int err;
|
|
|
|
err = enabled_clock(pclken->bus);
|
|
if (err < 0) {
|
|
/* Attempt to configure a src clock not available or not valid */
|
|
return err;
|
|
}
|
|
|
|
/* MCO source */
|
|
sys_clear_bits(
|
|
DT_REG_ADDR(DT_NODELABEL(rcc)) + STM32_DT_CLKSEL_REG_GET(pclken->enr),
|
|
STM32_DT_CLKSEL_MASK_GET(pclken->enr) <<
|
|
STM32_DT_CLKSEL_SHIFT_GET(pclken->enr));
|
|
sys_set_bits(
|
|
DT_REG_ADDR(DT_NODELABEL(rcc)) + STM32_DT_CLKSEL_REG_GET(pclken->enr),
|
|
STM32_DT_CLKSEL_VAL_GET(pclken->enr) <<
|
|
STM32_DT_CLKSEL_SHIFT_GET(pclken->enr));
|
|
|
|
#if defined(MCOX_ON)
|
|
sys_set_bits(DT_REG_ADDR(DT_NODELABEL(rcc)) + STM32_DT_CLKSEL_REG_GET(pclken->enr),
|
|
MCOX_ON);
|
|
#endif
|
|
|
|
#if defined(HAS_PRESCALER)
|
|
/* MCO prescaler */
|
|
sys_clear_bits(
|
|
DT_REG_ADDR(DT_NODELABEL(rcc)) + STM32_DT_CLKSEL_REG_GET(config->prescaler),
|
|
STM32_DT_CLKSEL_MASK_GET(config->prescaler) <<
|
|
STM32_DT_CLKSEL_SHIFT_GET(config->prescaler));
|
|
sys_set_bits(
|
|
DT_REG_ADDR(DT_NODELABEL(rcc)) + STM32_DT_CLKSEL_REG_GET(config->prescaler),
|
|
STM32_DT_CLKSEL_VAL_GET(config->prescaler) <<
|
|
STM32_DT_CLKSEL_SHIFT_GET(config->prescaler));
|
|
#endif
|
|
|
|
return pinctrl_apply_state(config->pcfg, PINCTRL_STATE_DEFAULT);
|
|
}
|
|
|
|
#define STM32_MCO_INIT(inst) \
|
|
\
|
|
PINCTRL_DT_INST_DEFINE(inst); \
|
|
\
|
|
const static struct stm32_mco_config stm32_mco_config_##inst = { \
|
|
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(inst), \
|
|
.pclken = STM32_DT_INST_CLOCKS(inst), \
|
|
IF_ENABLED(HAS_PRESCALER, \
|
|
(.prescaler = DT_PROP(DT_DRV_INST(inst), prescaler),)) \
|
|
}; \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(inst, stm32_mco_init, NULL, \
|
|
NULL, \
|
|
&stm32_mco_config_##inst, \
|
|
PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEVICE, \
|
|
NULL);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(STM32_MCO_INIT);
|