Marco Peter 03f256505c drivers: ssd1306: Add SPI support ... This change allows to use SSD1306 based displays to be used on the SPI bus as well. Adding SPI shield. Tested on SSD1306 and SSD1309 based displays using I2C. Tested on SSD1309 based display using SPI. Signed-off-by: Marco Peter <marco@peter-net.ch>		2020-10-02 11:33:26 +02:00
..
adafruit_2_8_tft_touch_v2	drivers: display: ili9340: move frame rate control register to DT	2020-09-29 14:18:05 -05:00
adafruit_winc1500	shields: Adafruit WINC1500 Wifi Shield	2020-08-26 15:44:22 -05:00
atmel_rf2xx	boards: shields: atmel_rf2xx: Improve documentation	2020-08-17 13:36:29 -04:00
boostxl_ulpsense
buydisplay_2_8_tft_touch_arduino	drivers: display: ili9340: move frame rate control register to DT	2020-09-29 14:18:05 -05:00
dac80508_evm	boards: shields: dac80508_evm: add TI DAC80508 EVM shield	2020-08-26 12:24:43 +02:00
dfrobot_can_bus_v2_0	spi-device: set CS gpio flags for all devices that had none	2020-07-09 06:07:07 -05:00
esp_8266	boards: shields: esp_8266: Add std headers overlay	2020-07-17 11:38:28 +02:00
frdm_cr20a
frdm_kw41z
link_board_eth
lmp90100_evb
mikroe_adc_click
mikroe_eth_click	doc: shields: H1 heading was missing for mikroe_eth_click	2020-08-10 09:07:05 -05:00
sparkfun_sara_r4
ssd1306	drivers: ssd1306: Add SPI support	2020-10-02 11:33:26 +02:00
st7789v_generic	lib: gui: lvgl: align all Kconfig object names	2020-08-26 15:32:59 -05:00
v2c_daplink	boards: shields: add support for the ARM Ltd. V2C DAPLink shield	2020-09-04 17:37:22 +02:00
waveshare_epaper	lib: gui: lvgl: align all Kconfig object names	2020-08-26 15:32:59 -05:00
wnc_m14a2a
x_nucleo_idb05a1
x_nucleo_iks01a1
x_nucleo_iks01a2
x_nucleo_iks01a3
x_nucleo_iks02a1
index.rst