mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-09-03 07:21:56 +00:00
175b8a7393
Couple of samples missing the conversion. Signed-off-by: Anas Nashif <anas.nashif@intel.com> |
||
|---|---|---|
| .. | ||
| src | ||
| CMakeLists.txt | ||
| prj.conf | ||
| README.rst | ||
| sample.yaml | ||
.. _fade-led-sample: PWM: Fade LED ############# Overview ******** This is a sample app which fades a LED using PWM. The LED will start from dark and increases its brightness gradually for 10 seconds. Then, the brightness reduces gradually for 10 seconds and finally the LED becomes dark again. The LED will repeat this cycle for ever. Wiring ****** Nucleo_F401RE, Nucleo_L476RG ============================ Connect PWM2(PA0) to LED Nucleo_F103RB ============= Connect PWM1(PA8) to LED Nucleo_L496ZG ============= No special board setup is necessary because there are three on-board LEDs (red, green, blue) connected to the Nucleo's PWM. Hexiwear K64 ============ No special board setup is necessary because there is an on-board RGB LED connected to the K64 PWM. nrf52840dk_nrf52840 =================== No special board setup is necessary because there is an on-board LED connected. Building and Running ******************** This sample can be built for multiple boards, in this example we will build it for the nrf52840dk_nrf52840 board: .. zephyr-app-commands:: :zephyr-app: samples/basic/fade_led :board: nrf52840dk_nrf52840 :goals: build flash :compact: