zephyr/include/drivers/uart.h
Daniel Leung 1ad2a56ee3 serial: rework functions to use struct device...
... instead of an array index to a global array. This is
an intermediate step to make the drivers conform to
the new driver model.

This only changes from using a direct array index to using
device structs. The UARTs are still staticlly defined.
Later patches will make the drivers utilize the driver
initialization procedure specified by the driver model.

Change-Id: I18041bbb4b0efdf8ae87088fd000b391d0827e9b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
2016-02-05 20:15:25 -05:00

102 lines
3.4 KiB
C

/* uart.h - public UART driver APIs */
/*
* Copyright (c) 2015 Wind River Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2) Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3) Neither the name of Wind River Systems nor the names of its contributors
* may be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __INCuarth
#define __INCuarth
#ifdef __cplusplus
extern "C" {
#endif
#include <device.h>
/* UART device configuration */
struct uart_device_config_t {
/**
* Base port number
* or memory mapped base address
* or register address
*/
union {
uint32_t port;
uint8_t *base;
uint32_t regs;
};
uint8_t irq; /**< interrupt request level */
uint8_t int_pri; /**< interrupt priority */
};
/** UART configuration structure */
struct uart_init_info {
int baud_rate; /* Baud rate */
uint32_t sys_clk_freq; /* System clock frequency in Hz */
uint8_t int_pri; /* Interrupt priority level */
uint8_t options; /* HW Flow Control option */
uint32_t regs; /* Register address */
};
/* UART driver has to configure the device to 8n1 */
void uart_init(struct device *dev,
const struct uart_init_info * const pinfo);
/* console I/O functions */
int uart_poll_in(struct device *dev, unsigned char *p_char);
unsigned char uart_poll_out(struct device *dev, unsigned char out_char);
#ifdef CONFIG_UART_INTERRUPT_DRIVEN
/* interrupt driven I/O functions */
int uart_fifo_fill(struct device *dev, const uint8_t *txData, int len);
int uart_fifo_read(struct device *dev, uint8_t *rxData, const int size);
void uart_irq_tx_enable(struct device *dev);
void uart_irq_tx_disable(struct device *dev);
int uart_irq_tx_ready(struct device *dev);
void uart_irq_rx_enable(struct device *dev);
void uart_irq_rx_disable(struct device *dev);
int uart_irq_rx_ready(struct device *dev);
void uart_irq_err_enable(struct device *dev);
void uart_irq_err_disable(struct device *dev);
int uart_irq_is_pending(struct device *dev);
int uart_irq_update(struct device *dev);
unsigned int uart_irq_get(struct device *dev);
void uart_generic_info_init(struct uart_init_info *p_info);
#endif
#ifdef __cplusplus
}
#endif
#endif /* __INCuarth */