mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-09-02 23:41:56 +00:00
2cb045420c
The headings on some .rst files were not following the expected heading order of using # for h1, * for h2, = for h3, and - for h4 This patch fixes that, and the doc/templates/*.tmpl files created for folks to use as templates for creating board and sample docs. Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9 Signed-off-by: David B. Kinder <david.b.kinder@intel.com> |
||
|---|---|---|
| .. | ||
| src | ||
| Makefile | ||
| prj.conf | ||
| README.rst | ||
| testcase.ini | ||
PWM: Fade LED ############# Overview ******** This is a sample app which fades a LED using PWM. The LED will start from dark and increases its brightness gradually for 10 seconds. Then, the brightness reduces gradually for 10 seconds and finally the LED becomes dark again. The LED will repeat this cycle for ever. Wiring ****** Arduino 101 and Quark D2000 CRB =============================== You will need to connect the LED to ground and PWM0 via the shield. You may need a current limiting resistor. See your LED datasheet. Nucleo_F401RE and Nucleo_L476RG =============================== Connect PWM2(PA0) to LED Nucleo_F103RB ============= Connect PWM1(PA8) to LED Building and Running ******************** This sample can be built for multiple boards, in this example we will build it for the arduino_101 board: .. code-block:: console $ cd samples/basic/fade_led $ make BOARD=arduino_101 $ make BOARD=arduino_101 flash