mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-09-18 12:31:56 +00:00
b78ffc0e6b
Docs need a label at the top so we can use :ref:`labelname` to create a link to that doc from other docs. Change-Id: I57d65a8888f78aa61d776f607a5db86bdb35726c Signed-off-by: David B. Kinder <david.b.kinder@intel.com> |
||
|---|---|---|
| .. | ||
| src | ||
| Makefile | ||
| prj.conf | ||
| README.rst | ||
| testcase.ini | ||
.. _rgb-led-sample: PWM: RGB LED ############ Overview ******** This is a sample app which drives a RGB LED using PWM. There are three LEDs of single color in a RGB LED. The three LEDs will be driven by a pwm port each. The pulse width for each pwm port will change from zero to period. So, the brightness for each LED will change from dark to max brightness in 11 steps. The three "for" loops (one for each LED) will generate 1331 combinations and so, 1331 different colors. The whole process will repeat for ever. Wiring ****** Arduino 101 =========== You will need to connect the LED pins to PWM0, PWM1 and PWM2 on arduino 101 via the shield. Depending on what kind of RGB LED you are using, please connect the common cathode to the ground or the common anode to Vcc. You need current limiting resistor for each of the single color LEDs. The sample app requires three PWM ports. So, it can not work on Quark D2000 platform. Building and Running ******************** This samples does not output anything to the console. It can be built and flashed to a board as follows: .. code-block:: console $ cd samples/basic/rgb_led $ make BOARD=arduino_101 $ make BOARD=arduino_101 flash