mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-08-10 14:55:35 +00:00
bc6c363bc9
Rename all Silicon Labs dev kits to always use the official kit name as board target name. Previous kit names used various naming schemes, including putting part of the SoC name in the board name. With HWMv2, SoC names (if needed) should go in the SoC board qualifier. Use HWMv2 revisions for the two variants of SLTB010A. Split the xG27 Dev Kit from the EFR32BG22 Thunderboard. This attempt at deduplication is confusing due to the very different kit names and use of different ICs (BG22 vs BG27), and was not continued with the xG24 Dev Kit, meaning that it wasn't consistent. Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com> |
||
|---|---|---|
| .. | ||
| boards | ||
| src | ||
| CMakeLists.txt | ||
| prj.conf | ||
| README.rst | ||
| sample.yaml | ||
| trigger.conf | ||
.. _sht3xd: SHT3XD: High accuracy digital I2C humidity sensor ################################################# Description *********** This sample application periodically (2 Hz) measures the ambient temperature and humidity. The result is written to the console. Optionally, it also shows how to use the upper threshold triggers. References ********** - `SHT3X-DIS sensor <https://www.sensirion.com/en/environmental-sensors/humidity-sensors/digital-humidity-sensors-for-various-applications/>`_ Wiring ******* This sample uses the SHT3X_DIS sensor controlled using the I2C interface. Connect Supply: **VDD**, **GND** and Interface: **SDA**, **SCL** and optionally connect the **ALERT** to a interrupt capable GPIO. The supply voltage can be in the 2.15V to 5.5V range. Depending on the baseboard used, the **SDA** and **SCL** lines require Pull-Up resistors. Building and Running ******************** This project outputs sensor data to the console. It requires a SHT3XD sensor. It should work with any platform featuring a I2C peripheral interface. It does not work on QEMU. In this example below the :ref:`nrf51_ble400` board is used. .. zephyr-app-commands:: :zephyr-app: samples/sensor/sht3xd :board: nrf51_ble400 :goals: build flash Sample Output ============= .. code-block:: console SHT3XD: 19.64 Cel ; 41.96 %RH SHT3XD: 19.74 Cel ; 42.06 %RH SHT3XD: 19.75 Cel ; 42.08 %RH <repeats endlessly>