mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-09-02 23:41:56 +00:00
fa58d1e6ce
No need to build the net_pkt, just send the buffer directly. Let's reuse already parsed ip/proto headers as well. Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com> |
||
|---|---|---|
| .. | ||
| boards | ||
| src | ||
| CMakeLists.txt | ||
| overlay-bt.conf | ||
| overlay-netusb.conf | ||
| prj.conf | ||
| README.rst | ||
| sample.yaml | ||
.. _zperf-sample: zperf: Network Traffic Generator ################################ Description *********** zperf is a network traffic generator for Zephyr that may be used to evaluate network bandwidth. Features ********* - Compatible with iPerf_2.0.5. - Client or server mode allowed without need to modify the source code. Supported Boards **************** zperf is board-agnostic. However, to run the zperf sample application, the target platform must provide a network interface supported by Zephyr. This sample application has been tested on the following platforms: - Freedom Board (FRDM K64F) - Quark SE C1000 Development Board - QEMU x86 Requirements ************ - iPerf 2.0.5 installed on the host machine - Supported board Depending on the network technology chosen, extra steps may be required to setup the network environment. Usage ***** If Zephyr acts as a client, iPerf must be executed in server mode. For example, the following command line must be used for UDP testing: .. code-block:: console $ iperf -s -l 1K -u -V -B 2001:db8::2 For TCP testing, the command line would look like this: .. code-block:: console $ iperf -s -l 1K -V -B 2001:db8::2 In the Zephyr console, zperf can be executed as follows: .. code-block:: console zperf udp upload 2001:db8::2 5001 10 1K 1M For TCP the zperf command would look like this: .. code-block:: console zperf tcp upload 2001:db8::2 5001 10 1K 1M If the IP addresses of Zephyr and the host machine are specified in the config file, zperf can be started as follows: .. code-block:: console zperf udp upload2 v6 10 1K 1M or like this if you want to test TCP: .. code-block:: console zperf tcp upload2 v6 10 1K 1M If Zephyr is acting as a server, set the download mode as follows for UDP: .. code-block:: console zperf udp download 5001 or like this for TCP: .. code-block:: console zperf tcp download 5001 and in the host side, iPerf must be executed with the following command line if you are testing UDP: .. code-block:: console $ iperf -l 1K -u -V -c 2001:db8::1 -p 5001 and this if you are testing TCP: .. code-block:: console $ iperf -l 1K -V -c 2001:db8::1 -p 5001 iPerf output can be limited by using the -b option if Zephyr is not able to receive all the packets in orderly manner.