mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-09-07 12:12:50 +00:00
7eb6bd6dfe
Enable the SPI driver on the HiFive 1 This makes the following configurations choices for the HiFive 1: The SPI 0 peripheral driver is not enabled by default because it is in charge of mapping the SPI flash into memory. This can be configured using the CONFIG_SIFIVE_SPI_0_ROM KConfig option. The SPI 1 peripheral driver is enabled by default and the pinmux is configured for all of its outputs The SPI 2 peripheral driver is enabled by default because it is present in the DTS for the FE310, but because the QFN48 package used on the HiFive 1 doesn't route those pins from the silicon die, the pinmux can't enable the SPI 2 pins. Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com> |
||
|---|---|---|
| .. | ||
| hifive1 | ||
| m2gl025_miv | ||
| qemu_riscv32 | ||
| rv32m1_vega | ||
| index.rst | ||