zephyr/ext/hal
Andrzej Głąbek 998c79d09b drivers: spi: Add shim for nrfx SPIM driver
This adds a translation layer to make the nrfx driver for the nRF SPIM
(SPI Master with EasyDMA) peripheral accessible via the Zephyr's API.
The shim is provided only for nRF52840 because of a hardware anomaly
present in nRF52832. See Anomaly 58 (SPIM: An additional byte is clocked
out when RXD.MAXCNT = 1) in Errata for this chip.

Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
2018-04-12 14:19:53 -04:00
..
altera
atmel
cmsis
esp
nordic drivers: spi: Add shim for nrfx SPIM driver 2018-04-12 14:19:53 -04:00
nxp subsys: net: ip: l2: openthread: Fixed compiler errors and warnings 2018-04-11 16:57:12 +03:00
qmsi
silabs
st
ti
CMakeLists.txt
Kconfig ext/hal/nxp/imx: Import the nxp imx7 freertos bsp 2018-04-11 08:27:05 +02:00
README

This directory contains different HALs for SoCs supported by Zephyr.

The following HALs are supported:

atmel
-------
The Atmel Software Framework (ASF) provides device header files and peripheral
drivers for Atmel SoCs.

cmsis
-------
The ARM Cortex Microcontroller Software Interface Standard (CMSIS) defines a
set of standard interfaces to ARM Cortex-M SoCs.

gecko
-----
The Silicon Labs Gecko SDK provides device header files and peripheral drivers
for all Silicon Labs Gecko devices: EFM32, EZR32 and EFR32.

mcux
-------
The NXP MCUXpresso Software Development Kit (MCUX) provides device header files
and peripheral drivers for Kinetis, LPC, and i.MX SoCs.

nordic
-------
The Nordic Semiconductor Microcontroller Development Kit (MDK) provides device
header files for the Nordic Semiconductor nRF5 SoCs.

qmsi
-------
Intel® Quark™ Microcontroller Software Interface (QMSI) is a Hardware
Abstraction Layer (HAL) for Intel® Quark™ Microcontroller products. It
currently support the following SoCs:

- Intel® Quark™ D2000 Microcontroller
- Intel® Quark™ SE Microcontroller

stm32cube
---------
ST Microelectronics STM32Cube SDK
Provides CMSIS header files and two different porting layers HAL (hardware
abstraction layer), and LL (low layers) enabling portability between different
STM32 devices via standardized API calls.
LL and HAL provide different level of porting on STM32 SoCs. They could be used
independently, or mixed depending on the needs.

For further information:
http://www.st.com/en/ecosystems/stm32cube.html

ti
-------
Texas Instruments SimpleLink SDKs provide peripheral and WiFi driver libraries
for the SimpleLink family of SoCs.