zephyr/drivers
Marcin Niestroj 668cbe19a3 drivers: wifi: esp: support power-gpios to enable ESP module
Add power-gpios device-tree binding property to power on module before
communicating with it. This pin is called CHIP_PU in case of ESP32{,-S2}
and CHIP_EN in case of ESP8266. Dedicated reset pin is available only on
the latter, however Espressif recommends (in ESP8266 Hardware Design
Guidelines) to use CHIP_EN instead. Follow those recommendations and use
power-gpios to reset chip if that is provided over device-tree.

Configure power-gpios and reset-gpios as inactive by default, so that
chip becomes ready after executing esp_reset() function, either if one
or both are provided over device-tree.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
2020-10-20 07:32:01 -05:00
..
adc drivers: adc: stm32: add support for pinmux 2020-10-14 07:15:12 -05:00
audio
bluetooth drivers: Bluetooth: rpmsg: Add missing BT_QUIRK_NO_AUTO_DLE 2020-09-16 12:02:32 +02:00
can drivers: can: stm32: add support for pinmux 2020-10-13 13:13:08 +02:00
clock_control drivers: Add NXP LPC clock control driver 2020-10-15 11:17:24 -05:00
console net: ppp: Avoid wrapping each byte in muxing headers 2020-10-19 18:29:02 +02:00
counter drivers: counter: stm32: hide irrelevant options 2020-10-07 15:26:03 -05:00
crypto misc: Replace assert include and calls by sys/__assert.h equivalent 2020-10-02 11:42:40 +02:00
dac drivers: dac: stm32: add support for pinmux 2020-10-12 08:49:36 -05:00
debug
display drivers: ssd1306: remove SPI operation flags 2020-10-19 18:49:29 +02:00
dma drivers: dma: pl330: const-ify device instance 2020-10-16 06:50:49 -05:00
ec_host_cmd_periph
eeprom dts/Kconfig: Remove HAS_DTS_I2C 2020-09-18 13:34:44 -05:00
entropy drivers/entropy: stm32: fix error erasing 2020-09-09 14:10:07 +02:00
espi drivers: espi: npcx7: fix wrong comparison in vw generic isr. 2020-10-12 14:47:33 -05:00
ethernet eth: mcux: Use different RX and TX buffers for each instance 2020-10-14 07:19:09 -05:00
flash drivers: flash: Restore write protection in flash_shell 2020-10-02 12:06:28 -04:00
gpio driver: gpio: proper Kconfig shell dependency 2020-10-20 07:23:55 -05:00
hwinfo drivers: hwinfo: sam: Add sam4l hwinfo support 2020-09-04 16:29:19 -05:00
i2c drivers: i2c: Move Kconfig I2C instances to esp32 2020-10-16 06:36:18 -04:00
i2s misc: Replace assert include and calls by sys/__assert.h equivalent 2020-10-02 11:42:40 +02:00
ieee802154 drivers: ieee802154: nrf5: Add support for failed rx notification 2020-10-19 12:50:02 +03:00
interrupt_controller drivers: npcx: Add const modifier for hal instances and so on. 2020-10-06 18:16:02 -05:00
ipm
kscan dts/Kconfig: Remove HAS_DTS_I2C 2020-09-18 13:34:44 -05:00
led dts/Kconfig: Remove HAS_DTS_I2C 2020-09-18 13:34:44 -05:00
led_strip drivers: led_strip: APA102 use CS flags from devicetree 2020-09-14 18:35:26 -05:00
lora drivers: lora: Add CheckRfFrequency callback to SX1276 driver 2020-10-08 12:15:38 +02:00
modem drivers: gsm: Add GSM modem device name 2020-10-19 18:29:02 +02:00
net net: ppp: Avoid wrapping each byte in muxing headers 2020-10-19 18:29:02 +02:00
neural_net
pcie drivers: pcie: endpoint: fix ISR prototype 2020-09-08 18:10:22 -05:00
peci drivers: peci: xec: Fix error recovery handling 2020-09-15 12:35:15 -05:00
pinmux soc: arm: stm32g0: add STM32G070 SoC series 2020-10-09 11:49:39 +02:00
ps2
ptp_clock
pwm soc/arm: stm32: swap argument order in ST_STM32 PINCTRL macros 2020-10-09 11:52:59 +02:00
sensor drivers/sensor: add support to IIS2ICLX accelerometer 2020-10-15 09:57:47 -05:00
serial drivers: Update Flexcomm Serial driver for clock control 2020-10-15 11:17:24 -05:00
spi drivers/spi: stm32: Convert to devicetree pinctrl generation 2020-10-19 10:24:01 -05:00
timer drivers: timer: nrf_rtc_timer: Use interrupt priority from DT 2020-10-06 15:34:34 +02:00
usb usb: nrf: Do not allow to clear STALL or dtoggle for ISO ep. 2020-09-15 10:15:20 +02:00
video
watchdog misc: Replace assert include and calls by sys/__assert.h equivalent 2020-10-02 11:42:40 +02:00
wifi drivers: wifi: esp: support power-gpios to enable ESP module 2020-10-20 07:32:01 -05:00
CMakeLists.txt
Kconfig