mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-08-31 21:55:55 +00:00
d3f587e326
enc28j60 can work up to 25Mhz, let's set a divider of 2 on the 32Mhz host clock then. This require to mimic CS with a gpio in the SPI driver. Change-Id: I98f84fa793a614cdbb566be39a262ff825101255 Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com> |
||
|---|---|---|
| .. | ||
| src | ||
| Makefile | ||
| prj_arduino_101.conf | ||
| prj_qemu_x86.conf | ||
| README | ||
| README_arduino_101 | ||
| testcase.ini | ||
mbed TLS DTSL client +++++++++++ This sample code shows a simple DTSL client using mbed TLS on top of Zephyr Prerequisites ============= - PC with Linux. - screen command and gcc compiler Procedure ========= a) Follow the prerequisites described in https://wiki.zephyrproject.org/view/Networking-with-Qemu $ git clone https://gerrit.zephyrproject.org/r/net-tools $ cd net-tools $ make b) From a terminal window, type: $ ./loop-socat.sh c) Open another terminal window, change directory to the one where net-tools are $ cd net-tools $ sudo ./loop-slip-tap.sh d) In other terminal window, obtain the mbed TLS code from: https://tls.mbed.org/download/start/mbedtls-2.3.0-apache.tgz and put it in a well know directory, in your Linux machine, this will be your server. e) cd to that directory and compile the mbedTLS on your host machine $ tar -xvzf mbedtls-2.3.0-apache.tgz $ cd mbedtls-2.3.0 $ CFLAGS="-I$PWD/configs -DMBEDTLS_CONFIG_FILE='<config-thread.h>'" make f) Assign the server IP address and start the DTSL server. $ sudo ip addr add 192.0.2.2/24 dev tap0 $ ./programs/ssl/ssl_server2 dtls=1 ecjpake_pw=passwd You should see something like this . Seeding the random number generator... ok . Bind on udp://*:4433/ ... ok . Setting up the SSL/TLS structure... ok . Waiting for a remote connection ... To stop the server use Ctrl-C and repeat steps described in f) every time QEMU gets terminated, due the Netwrok interface (tap) being restarted. g) From the app directory type $make pristine && make qemu The screen should display . Seeding the random number generator... ok . Setting up the DTLS structure... ok . Connecting to udp 192.0.2.2:4433... ok . Setting up ecjpake password ... ok . Performing the SSL/TLS handshake... ok > Write to server: ok . Closing the connection... done h) In the server side you should see this . Performing the SSL/TLS handshake... hello verification requested . Waiting for a remote connection ... ok . Performing the SSL/TLS handshake... ok [ Protocol is DTLSv1.2 ] [ Ciphersuite is TLS-ECJPAKE-WITH-AES-128-CCM-8 ] [ Record expansion is 29 ] [ Maximum fragment length is 16384 ] < Read from client: 18 bytes read GET / HTTP/1.0 > Write to client: 143 bytes written in 1 fragments HTTP/1.0 200 OK Content-Type: text/html <h2>mbed TLS Test Server</h2> <p>Successful connection using: TLS-ECJPAKE-WITH-AES-128-CCM-8</p> . Closing the connection... done . Waiting for a remote connection ... ok . Performing the SSL/TLS handshake... failed ! mbedtls_ssl_handshake returned -0x7900 . Waiting for a remote connection ... Disregard the last handshake failed message, due the closing connection Troubleshooting =============== - If the server does not receive the messages, use a network traffic analyzer, like Wireshark. - Reset the board References ========== [1] https://www.zephyrproject.org/doc/getting_started/getting_started.html [2] https://wiki.zephyrproject.org/view/Networking-with-Qemu [3] https://tls.mbed.org/