Aurelien Jarno 6b6e54321a drivers: usb: add usb device driver for Atmel SAM E70 family ... This patch adds a USB device driver for the USBHS device that can be found on Atmel SAM E70 SoC family. Only the FIFO mode is supported (as opposed to DMA). It supports LS, FS and HS modes, but defaults to FS mode as Zephyr does not fully support HS mode yet. Tested examples on an Atmel SMART SAM E70 Xplained Board: * usb/cdc_acm * usb/hid-mouse * usb/mass Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>		2018-11-06 16:32:35 -05:00
..
arm
atmel_sam	drivers: usb: add usb device driver for Atmel SAM E70 family	2018-11-06 16:32:35 -05:00
atmel_sam0	drivers: spi_sam0: move sercom pad info to dts	2018-11-05 10:05:47 -05:00
cypress	arm: cypress/psoc6: add SoC specific linker input sections	2018-10-19 16:11:34 -04:00
nordic_nrf	cmake: nrf51: Don't #define NRF51822	2018-11-04 22:03:01 +01:00
nxp_imx
nxp_kinetis	arm: kinetis: Add basic DTS support for TRNG	2018-11-06 08:49:50 -06:00
nxp_lpc
silabs_exx32	soc: arm: exx32: Add Silabs EFR32MG12P soc files	2018-10-19 13:47:49 -05:00
st_stm32	drivers/i2c: stm32: get clock bits/bus from dts files	2018-11-06 16:14:13 -05:00
ti_lm3s6965	soc: Remove board.h include	2018-11-01 13:15:18 +01:00
ti_simplelink	gpio: ti cc32xx: Add device tree support for GPIO	2018-11-05 11:08:35 -06:00
CMakeLists.txt
Kconfig	doc: fix kconfig misspellings	2018-11-02 17:58:16 -04:00