Armando Visconti 208f565bce driver/sensor: add LIS2DW12 sensor support ... Add support to STM LIS2DW12 3-axis accelerometer driver. The driver support I2C and SPI bus communication and both polling and drdy trigger mode. Co-authored-by: Mario Tesi <mario.tesi@st.com> Signed-off-by: Armando Visconti <armando.visconti@st.com>		2019-02-08 15:22:42 -06:00
..
arc
arm	dts: bindings: ccm: Drop base_label setting	2019-02-08 10:29:57 -06:00
audio
bluetooth	samples: bluetooth: hci_spi: Use DT instead of Kconfig to get HW params	2019-02-01 19:12:57 -05:00
can
clock
crypto
display	drivers: ssd1673: add DT properties for configuration registers	2019-02-08 14:57:36 -05:00
ethernet
flash_controller
gpio	gpio: intel_apl: rework driver for pin_mask callback	2019-02-06 07:18:15 -05:00
i2c	drivers/i2c: I2C driver for SiFive Freedom	2019-02-07 10:47:48 -06:00
i2s
ieee802154
iio/adc
interrupt-controller	dts: bindings: openisa,rv32m1-event-unit: remove base_label	2019-02-08 14:44:42 -06:00
led
led_strip	led_strip: lpd880x: Add Device Tree support	2019-01-29 12:04:07 -06:00
memory-controllers
mmc
modem
mtd	dts: bindings: mtd: partition: remove base_label	2019-02-08 14:44:42 -06:00
phy
pinctrl
power
pwm	drivers/pwm: Driver for SiFive PWM peripheral	2019-02-08 09:09:35 -06:00
riscv
rng
rtc	drivers/counter: stm32 rtc: Use dts to get RTC clock information	2019-02-07 16:14:00 -05:00
sensor	driver/sensor: add LIS2DW12 sensor support	2019-02-08 15:22:42 -06:00
serial	drivers: leuart_gecko: use DT_<COMPAT>_<INSTANCE>_<PROP> defines	2019-02-01 04:18:50 -06:00
spi	drivers/spi: Generate clock-frequency for SPI bus	2019-02-06 09:00:00 -06:00
sram
timer	dts: arm_cmsdk_(d)timer: Add label property to (d)timer	2019-02-07 16:14:00 -05:00
usb
watchdog	dts: stm32: Add watchdog nodes to STM32 dtsi files	2019-02-01 19:16:59 -05:00
wifi
device_node.yaml.template	dts: Remove base_label support	2019-02-08 14:44:42 -06:00