Armando Visconti 8dbe9806ff drivers/i2c: Kconfig.stm32: Enable interrupts usage by default ... I2C interrupts usage should be the preferred way. This commit enables them by default in the STM32 I2C driver itself. Signed-off-by: Armando Visconti <armando.visconti@st.com>		2020-01-24 21:34:45 -05:00
..
slave
CMakeLists.txt	i2c: add i2c shell with scan cmd	2020-01-10 08:55:47 -05:00
i2c_bitbang.c
i2c_bitbang.h
i2c_cc13xx_cc26xx.c
i2c_cc32xx.c
i2c_dw_port_x.h
i2c_dw_registers.h
i2c_dw.c
i2c_dw.h
i2c_esp32.c
i2c_gecko.c
i2c_gpio.c
i2c_handlers.c
i2c_imx.c
i2c_litex.c	drivers: i2c: Add driver for LiteX I2C controller	2020-01-07 20:55:43 +01:00
i2c_ll_stm32_v1.c
i2c_ll_stm32_v2.c
i2c_ll_stm32.c
i2c_ll_stm32.h
i2c_mchp_xec.c	i2c: mchp_xec: define driver instaces based on device tree...	2020-01-18 13:33:20 -05:00
i2c_mcux_lpi2c.c	drivers: i2c: Refactor mcux lpi2c driver to use generated dts macros	2020-01-14 11:10:27 -05:00
i2c_mcux.c	drivers: i2c: Refactor mcux i2c driver to use generated dts macros	2020-01-15 18:02:19 -05:00
i2c_nios2.c
i2c_nrfx_twi.c
i2c_nrfx_twim.c
i2c_rv32m1_lpi2c.c
i2c_sam_twi.c
i2c_sam_twihs.c
i2c_sam0.c
i2c_sbcon.c
i2c_shell.c	i2c: add i2c shell with scan cmd	2020-01-10 08:55:47 -05:00
i2c_sifive.c
i2c-priv.h
Kconfig	i2c: add i2c shell with scan cmd	2020-01-10 08:55:47 -05:00
Kconfig.cc13xx_cc26xx
Kconfig.dw
Kconfig.esp32
Kconfig.gpio
Kconfig.litex	kconfig: Turn pointless 'menuconfig's into 'config's	2020-01-24 21:30:17 -05:00
Kconfig.nrfx	drivers: nrf: Catch for nRF53 serial interference	2020-01-07 17:14:25 +01:00
Kconfig.sam0
Kconfig.sbcon
Kconfig.sifive
Kconfig.stm32	drivers/i2c: Kconfig.stm32: Enable interrupts usage by default	2020-01-24 21:34:45 -05:00
Kconfig.xec	kconfig: Turn pointless 'menuconfig's into 'config's	2020-01-24 21:30:17 -05:00