mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-08-31 12:25:51 +00:00
1cccc8a8fe
Move to CMake 3.20.0. At the Toolchain WG it was decided to move to CMake 3.20.0. The main reason for increasing CMake version is better toolchain support. Better toolchain support is added in the following CMake versions: - armclang, CMake 3.15 - Intel oneAPI, CMake 3.20 - IAR, CMake 3.15 and 3.20 Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no> |
||
|---|---|---|
| .. | ||
| boards | ||
| src | ||
| CMakeLists.txt | ||
| prj.conf | ||
| README.rst | ||
| sample.yaml | ||
.. _ms5837-sample: MS5837 Sensor Sample #################### Overview ******** This sample application retrieves the pressure and temperature from a MS5837 sensor every 10 seconds, and prints this information to the UART console. Requirements ************ - `nRF52840 Preview development kit`_ - MS5837 sensor Wiring ****** The nrf52840 Preview development kit should be connected as follows to the MS5837 sensor. +-------------+----------+ | | nrf52840 | | MS5837 | | | Pin | | Pin | +=============+==========+ | P0.3 | SCL | +-------------+----------+ | P0.31 | SDA | +-------------+----------+ Building and Running ******************** Build this sample using the following commands: .. zephyr-app-commands:: :zephyr-app: samples/sensor/ms5837 :board: nrf52840dk_nrf52840 :goals: build :compact: See :ref:`nrf52840dk_nrf52840` on how to flash the build. References ********** .. target-notes:: .. _MS5837 Sensor: http://www.te.com/usa-en/product-CAT-BLPS0017.html?q=&type=products&samples=N&q2=ms5837 .. _nRF52840 Preview development kit: http://www.nordicsemi.com/eng/Products/nRF52840-Preview-DK