mirror of
https://github.com/zephyrproject-rtos/zephyr
synced 2025-08-26 20:28:26 +00:00
e2f13276cd
Add commands to suspend or resume the GSM modem. These commands might not be enough as at least the SIMCOM 808 modem requires that the modem is reset when it is resumed, and this application does not do any reset atm. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> |
||
|---|---|---|
| .. | ||
| boards | ||
| src | ||
| CMakeLists.txt | ||
| prj.conf | ||
| README.rst | ||
| sample.yaml | ||
.. _gsm-modem-sample: Generic GSM Modem Sample ######################## Overview ******** The Zephyr GSM modem sample application allows user to have a connection to GPRS network. The connection to GSM modem is done using :ref:`PPP (Point-to-Point Protocol) <ppp>`. The source code of this sample application can be found at: :zephyr_file:`samples/net/gsm_modem`. Requirements ************ - GSM modem card. The sample has been tested with SIMCOM SIM808 card. All GSM modem cards should work as long as they support **AT+CGDCONT** command. - Almost any Zephyr enabled board with sufficient resources can be used. The sample has been tested with :ref:`reel_board`. Build and Running ***************** If you are using an external modem like the SIMCOM card, then connect the necessary pins like RX and TX from your Zephyr target board to the modem card. Internal modems, like what is found in :ref:`particle_boron` board, are not yet supported. .. zephyr-app-commands:: :zephyr-app: samples/net/gsm_modem :board: reel_board :goals: build flash :gen-args: -DCONFIG_MODEM_GSM_APN=\"internet\" :compact: Note that you might need to change the APN name according to your GSM network configuration.